How to do a new home inspection? What is the new home inspection process?

Buying a house is a major event in life, and when the new house is inspected, it is often very exciting, and there are many precautions for the new house inspection, if the inspection is not good, it will leave a lot of hidden dangers and troubles in the future life. Let's talk about what to pay attention to in the new house inspection.

What to pay attention to in a new home inspection? What do you have to accept in a new home inspection?

Attention to the new home inspection.

First, the new house inspection should first check whether the ground is flat, bring a long ruler or level, close the ruler to the wall and ground, you can check whether the ground is flat.

Attention to the new home inspection.

Second, the new house inspection should observe whether the wall is cracked. The four common cracks include: strength cracks, settlement cracks, temperature cracks, and deformation cracks.

What to pay attention to in a new home inspection?

Third, it is necessary to check the flatness of the indoor stairs and whether there are defects, which is also a matter of attention for the inspection of new houses.

What to pay attention to in a new home inspection?

Fourth, the new house inspection should carefully check the doors and windows to see whether the door and window installation track is smooth and whether the closure is tight. If there is any damage to the door and window glass, if you find a problem during the house inspection, you can directly inform the developer, but if it has been signed, it will be difficult to deal with it with the developer.

What to pay attention to in a new home inspection?

Fifth, the new house inspection attention is very important, but also often always ignored, the new house inspection attention must carefully check the building height, the building height of the building is generally specified in meters, the actual height can not be less than meters.

What to pay attention to in a new home inspection? What are the procedures for a new home inspection?

First, the new house inspection should pay attention to the handover procedures within the specified time notified by the developer, if the new house has met the delivery conditions agreed in the purchase contract, under normal circumstances, the developer will notify the buyer in writing or in the form of ** before the date of delivery determined in the purchase contract.

Second, the new house inspection should pay attention to the new house after the inspection, when going through the handover procedures, the developer can be required to show relevant supporting documents, such as: "construction project planning acceptance certificate", "housing construction project completion acceptance record certification materials" and "housing surveying and mapping results".

3. New house inspection Note that if the developer fails to deliver the new house within the delivery date specified in the contract, or delays the delivery of the new house, the law stipulates that the buyer can urge the developer, and if the developer still does not deliver the house three months after the reminder, the buyer can claim to terminate the housing sales contract.

Generally speaking, there are a lot of precautions for new house inspection, know what to pay attention to in the new house inspection, in order to better complete the house, we must be cautious, whether it is the ground, water, electricity, doors and windows, etc., we must carefully inspect, and find problems to communicate with the developer in a timely manner, so as to solve the problem as soon as possible.

Finally see the long-awaited new home! At this moment, as a business owner, the mood is either excited, or mixed feelings. Many people don't know how to accept their new houses, and some people think that the quality inspection department has already accepted them, and it will be too much for them to accept.

In fact, if you find a problem before signing, you will be more likely to hold the developer accountable, and your problem will be solved more easily and quickly. Let's take a look at what to pay attention to in a home inspection! 1.

If you want to check whether the floor of the new house is flat, remember to bring a long ruler, preferably with a horizontal special ruler. 2.One of the hollow walls that should not be overlooked:

If there are obvious concave and convex walls, there is a hollowing phenomenon. 3.The hollow drum of the wall should not be ignored two:

Knocking on the wall with a muffled knocking sound is also a hollow drum phenomenon. 4.If you find a problem, find the developer to solve it in time.

6.When signing the owner's covenant and the pre-property management contract, remember to look at the terms and conditions, and never give up your rights. 7.

The first step is to pay attention to the deadline, if you miss it, there will be a lot of trouble. 8.When testing the area of the house, if the error of the measured area exceeds 3%, the house can be suspended.

9.If there is any dissatisfaction with the house inspection, the relevant comments should be sent to the developer in writing. 10.

The construction project completion record form is an important document to check when receiving the house, if there is no such form, it is equivalent to the same non-delivery standard, and the right to refuse to accept the house. I will introduce the precautions for decoration and home inspection, and now most owners are not professional in the knowledge of home inspection, so they will find a professional home inspector to inspect the house. However, it is also important that we have some knowledge of home inspection.

Therefore, we must make sufficient preparations and careful acceptance before the house inspection, leaving no dead ends.

How to inspect a new house? Pay attention to these three points to avoid trouble in the later stage.

The inspection process for <> new house is divided into seven steps: Check whether the wall is hollow: Use a drum hammer to check whether there is a hollow drum in the front.

Because hollow drums are a hidden attribute, they are often overlooked. Circuit acceptance: Circuit acceptance is a non-negligible part of the home inspection process.

Usually we bring a conventional electricity or light bulb to test the circuit. Waterway acceptance: The waterway acceptance focuses on the inspection of the drainage pipeline, and the house inspection comes with a large container to fill the water, and pays attention to whether the water pressure of the faucet is smooth while receiving the water.

Door and window inspection: acceptance of doors, windows and glass sealants. Check whether the doors and windows will be unobstructed when opening and closing, and whether there is a jam door.

Check whether the kitchen flue exhaust is unobstructed: you can take a piece of waste paper around the flue mouth and light it with a lighter to observe the exhaust capacity of the flue exhaust hole. Check the wall holes:

Observe whether the wall has reserved air conditioning holes, range hood exhaust holes or bathroom ventilation holes. Records: The following sets of receipts are also required to be recorded in the laboratory:

1. Water distance. 2. Scrape putty position. 3. Position of load-bearing wall and non-load-bearing wall.

4. The location of the insulation wall.

Use a drum hammer to check for hollowing in front. Because hollow drums are a hidden attribute, they are often overlooked. If the hollowing phenomenon is not detected and dealt with immediately, it will bring great trouble to the later decoration process.

After the wall has been hollowed for a long time, it will crack and fall off. Therefore, you must observe carefully during the house inspection, and the walls must be checked one by one.

Circuit acceptance is a non-negligible part of the home inspection process. Generally, we will bring the traditional electricity or bulb to test the circuit, but the traditional way can only reflect whether the circuit is connected, and check whether the ground wire, zero live wire is misconnected and leakage protection, etc., we need a professional electrical plug to check, in order to ensure the standard circuit acceptance standards.

The key point of waterway acceptance refers to the inspection of drainage pipes, and when inspecting the house, bring a large container to fill water, and pay attention to whether the water pressure of the faucet is smooth while receiving water. If the water pressure is insufficient, it will cause the phenomenon of insufficient **. Then use the connected water to pour into the toilet, sink drainage, vegetable sink drainage, floor drain, etc., and check whether the drainage will be blocked.

Acceptance of doors, windows and glass sealants. Check whether the doors and windows will be unobstructed when opening and closing, and whether there is a jam door. Moreover, it is necessary to check whether the locks of the doors and windows are consistent, whether the glass sealant on the window is uniform and tight, whether the combination of the window frame and the wall is smooth, and whether the sealing is tight, so as to avoid rain leakage and water leakage on rainy days.

Check that the kitchen flue exhaust is unobstructed. You can take a piece of waste paper around the flue mouth and light it with a lighter to observe the exhaust capacity of the flue exhaust hole.

Observe whether the wall has reserved air conditioning holes, range hood exhaust holes or toilet ventilation holes, etc., and observe whether the location of the holes is reasonable, and if it needs to be concealed, it will not cause the ceiling position to be too low.

The laboratory also needs to record the following sets of receipts: 1. Water distance. 2. Scrape putty position. 3. Position of load-bearing wall and non-load-bearing wall. 4. The location of the insulation wall.

1. Notice. After obtaining the real estate title certificate of the commercial house, the developer shall notify the buyer of the handover, and the notice shall be in writing and clearly state the handover time. The time limit for the developer to take over the building should be within one month after the handover is completed, and the notice of repossession shall be sent within one month, in accordance with the relevant legal provisions.

If the buyer fails to go through the relevant procedures at the designated place within the agreed time, it will be deemed that the developer has actually delivered the house to the buyer.

2. Acceptance. Buyers should inspect the quality of the housing project and supporting facilities in a timely manner, and make a record. During the acceptance, the buyer should verify the corresponding real estate certificate of the commercial housing and the quality inspection certificate of the construction project.

3. Provide relevant documents.

The developer should provide relevant documents including the Residential Quality Assurance Certificate and the Residential Instruction Manual. If the developer does not provide these documents, the buyer can refuse to sign the handover letter.

4. Sign the house handover letter.

When the buyer inspects the house and its property rights, he can sign the house handover letter in accordance with the relevant regulations, make a record of the need to make a record of the non-compliance with the contract, and require the developer to sign until the delivery conditions fully meet the delivery standards, and then sign the house handover letter.

What are the criteria for a new home inspection?

1. Whether there is water leakage on the roof, doors, windows, walls and other places, or whether there are residual stains. If there is, it means that there is a problem with the waterproofing function of the house.

2. Whether the doors and windows can be opened and closed smoothly, whether there are deformations, locks and other phenomena, and whether the quality of the doors and windows is qualified. And for the security door, it is also necessary to check whether the doorbell is normal.

3. The wall and ground should also be carefully inspected, and can be beaten with a small hammer, if there is a hollow drum or cracking, it means that there is a serious quality problem on the wall and ground.

4. The flue of the kitchen and bathroom should pay special attention to whether there is a blockage in the lead socks. During the inspection, the waste paper can be ignited to observe if there is any gas coming out of the smoke exhaust port. If it cannot be discharged, you should contact the developer in time.

5. The bathroom should also be inspected for waterproofing. You can use river sand to block the sewer mouth, and then continuously inject a large amount of water, and observe whether there is a water flow spreading downstairs after 2 hours, if not, it proves that the waterproof is good.

What are the criteria for a new home inspection? What is the process of a new home inspection? By now, everyone should know about it.

I want to remind everyone that when you accept a new house, you must prepare a small lamp by yourself, and you can insert it into the circuit jack when you accept the house, and check whether it is a little small light or not. When plugging in the small lights, you also need to check the switch box and the electric switch to see if each electric switch can operate normally.

Home inspection is a very important job for buyers when buying a new home, it can help us check the quality and existing problems of the new home. Here are some of the key points to look out for when inspecting a new home.

Structure & Appearance: The structure and appearance of the home should be carefully inspected during a home inspection. Make sure there are no visible cracks or deformations in walls, floors, ceilings, etc. At the same time, check whether the doors and windows are flat, well sealed, and can be opened and closed smoothly.

Hydropower system: Checking the hydropower system is a very important step. Check that the tap water is working** and turn on the faucet to test that the water is flowing.

At the same time, check whether there is leakage in the pipeline and whether the drainage system is operating properly. In terms of circuits, test whether the sockets and switches are working properly, and determine the random installation of backup power in the event of a power outage.

Underfloor heating and air conditioning systems: For homes with underfloor heating and air conditioning systems, it is important to check their operating status. Test whether the underfloor heating system generates heat evenly and ensure that the air conditioner can cool or heat properly. Also, check for problems such as water leaks or odors.

Lighting & Ventilation: Observe the lighting and ventilation of the house, check that the windows are intact, and test the glass for leakage. At the same time, determine if each room has enough natural light and air circulation.

Waterproofing and sound insulation: Check whether the waterproofing measures in wet areas such as bathrooms and kitchens are in place, and remind the developer to stop the file for repair when problems are found. Also, knock on the walls and floors to check if the sound insulation is good.

Renovation Materials and Craftsmanship: Carefully inspect the renovation materials and workmanship of the new home to ensure that they meet the regulations and standards in the purchase contract. Pay attention to observe whether there is uneven painting and substandard quality.

Other Equipment & Accessories: A home inspection also needs to check that some other equipment and accessories, such as gas pipes, fire protection facilities, elevators, etc., are in good condition and meet safety standards.

During the home inspection process, it is recommended that the buyer can be accompanied by a professional home inspector who has extensive experience in home inspections and is able to check the quality of the home more thoroughly. If any problems are found, communicate with the developer in time and ask for a solution. It is only through a careful home inspection process that buyers can be sure that they are buying a new home of good quality and that meets the requirements.

1.Building façade: check the wall for cracks, hollowing, water seepage and other defects;

2.Drainage system of the room: check whether the toilet, sink, shower, and sink are normal, and whether there is any leakage or poor drainage;

3.The electrical system of the room: check whether the opening and closing of the sleeper, socket, cable, etc. are installed correctly;

4.Room safety facilities: check whether fire doors, firewalls, smoke doors, fire extinguishers, etc. are installed correctly;

5.The air-conditioning system of the room: check whether the air conditioner, fan, air duct, etc. are normal, and whether there is corrosion, leakage, etc.;

6.The floor of the room: check whether the floor has potholes, blisters, falling off and other defects;

7.The wall of the room: check whether there are cracks, hollows, leaks and other defects on the wall;

8.Ceiling of the room: check the ceiling for defects such as leakage and hollowing.