The all in one microphone can t be used what s going on

The fax all-in-one machine has only one line connected to the network, so only one machine can be used at the same time, either to send faxes or call. When sending a fax, **data is being transmitted in the line, of course, you can't call**. Look at your number 07552182898870795 there is an area code and an extension number, 0755 is the Shenzhen area code, the Shenzhen number is 8 digits, it is the extension number, you need to insert the * number between the extension number and the **number, or dial the 075521828988, and wait until the ** prompts to enter the extension number when the extension number is entered on the numeric keypad 70795.

Fax receiving method: According to the fax status, it can be divided into the following situations. Automatically receive in Answer Fax Mode To use this mode, you must connect the answering machine to the ext. on the back of the machine

extension) socket. See "Making a Connection" in Chapter 2, page 4. If a caller leaves a message, the answerer normally stores the message.

If a fax tone is detected on the machine, it will automatically start receiving faxes. In ** mode, you can receive a fax by pressing the start button below. 1 Press the hands-free dial key or pick up the microphone of the ** extension.

2 Press Start, then "1" will appear on the display. Sending 2. Receiving" message.

3 Press 2 on the numeric keypad to "receive". 4 Press Confirm to start receiving faxes. Automatic Receiving in Fax Mode This unit is preset to fax mode at the factory.

When receiving a fax, the machine answers the incoming call with a specified number of rings and automatically receives the fax. When you hear the other party's voice when sending a fax, press the start button directly, and the other party will naturally choose to accept the fax when they hear the fax sound, without talking. Today's fax machines are designed for automatic faxing, without human involvement.

Hello landlord, your microphone is broken.

<>1. It may be a problem with earpieces, headphone connectors, receivers, etc. The solutions include antivirus, re-powering and sliding, sound setting, and after-sales treatment.

2. You can check whether there is a problem with the sound setting of the mobile phone. Sometimes, the phone's sound settings may be changed inadvertently.

3. Kill the phone. Shutdown and factory reset, some important things need to be backed up first to avoid loss.

4. Turn on the hands-free or put on headphones to see if there is any sound on the phone. If there is, it means that the earpiece may be broken, or there may be a problem such as poor contact.

It's not quite clear what your specific situation is, but there could be a few reasons:1Battery issues:

Wireless microphones need to be battery-powered, and if the battery is not properly placed or without power, it will not work properly. 2.Channel setup issues:

If other devices using the same channel interfere with your wireless microphone, then it won't work. Kemori tried to change the channel to solve the problem. 3.

Distance issues: Wireless microphones have a limited effective range, and if they are too far away, they will not work properly. You can try to get close to the device.

4.Device failure: If none of the above problems are the cause of the wireless microphone being unusable, then it may be that the device itself has this hidden fault and needs to be repaired or replaced.

It is recommended that you carefully check the above reasons, or contact the manufacturer or seller for more detailed help.