The Golf 7 tire pressure monitoring light came on for a while, and then went off again

Reason analysis: tire pressure monitoring is not very accurate, sometimes the weather is hot, the temperature in the tire is high, when turning or passing the speed bump, it will cause the tire to squeeze, and the pressure in the tire will increase instantly. However, as long as there is a prompt for tire pressure monitoring, you should pull over in time to check to avoid accidents.

It is also possible that the tire pressure monitoring is malfunctioning, and if this happens frequently, you need to go to a professional place to check if there is a problem with the tire pressure monitor.

Principles and advantages and disadvantages of different types of tire pressure monitoring].

Direct tire pressure monitoring.

The direct tire pressure monitoring device is to use the pressure sensor installed in each tire to directly measure the air pressure of the tire, and use the wireless transmitter to send the pressure information from the inside of the tire to the ** receiver module, and then display the tire pressure data. When the tire pressure is too low or flat, the system will automatically alarm.

Indirect tire pressure monitoring.

Indirect TPM works by saying that when the air pressure of one tire decreases, the weight of the vehicle causes the wheel to roll in a smaller radius, causing it to spin faster than other wheels. By comparing the speed difference between tires, the purpose of monitoring tire pressure is achieved.

The indirect tire alarm system actually relies on calculating the rolling radius of the tire to monitor the air pressure.

Its tire pressure monitoring features.

Both TPMS have their own advantages and disadvantages. Direct TPMS provides even more advanced capabilities to determine the actual instantaneous pressure inside each tire at any time, making it easy to identify faulty tires. Indirect systems are relatively inexpensive, and cars already equipped with 4-wheel ABS (1 wheel speed sensor per tire) only need to upgrade the software.

However, indirect TPMS is not as accurate as a direct system, it cannot identify faulty tires at all, and the system calibration is extremely complex, and the system may not work properly in some cases, such as when the pressure of both tires on the same axle is low.

It is recommended that you check the tire pressure.

Sometimes if you pass some bumps or pits, it will cause a large change in tire pressure, and the tire pressure monitoring will be bright.

The normal is that the tire pressure is low, but the running is higher than the alarm value, but it is actually still low, go and check the tire pressure.

1.Generally, there are the following situations: rapid air leakage, high pressure, low pressure, high temperature.

The indicator light is based on the tire pressure and other problems to the owner of a pre-type, perhaps in the process of driving there are potholes, the tire force is different, the tire pressure changes, the indicator light will also be on.

2.The tire pressure light is not on, and before starting the car, you should check it first to see if the tire pressure detector is normal. When the car is in trouble, if the tire pressure monitor does not alarm in time, it is a problem with the tire pressure monitor; If the ignition switch is on start, the indicator light point and the TPMS indicator light will be on at the same time for 2s and then turn off.

In this case, either the original receiver of the vehicle has not been learned, or the receiver controller has been replaced, and the receiver controller has not been learned. You can go to the 4S store and ask professionals to use handheld learning tools to re-obtain all tire sensor IDs and bind the receiving controllers.

3.But if the ignition is played from OFF to START or ON, the indicator light does not illuminate. Then this situation is the failure of the instrument indicator, for the sake of safety, you have to go to the 4S store to ask professionals to check the instrument, if the meter is damaged, the instrument needs to be replaced.

There are two reasons for the Golf 7 tire pressure light alarm, one is that the tire pressure is insufficient, and the other is that the tire pressure is too high.

Insufficient tire pressure can be caused by natural wear and tear, or it can be caused by tire studs or valve leaks. You should go to the tire repair shop in time to check the tires and adjust the air pressure to the standard value (the standard value is marked on the inside of the fuel tank cap).

If the tire pressure is too high, it is generally caused by inflation, and it should be inflated in strict accordance with the air pressure value specified by the manufacturer.

When the tire pressure is readjusted to the standard value, press and hold the tire pressure reset button (SET), which is located on the panel next to the gear lever, and after pressing and holding for 3 seconds, you can hear the sound of staring to reset, and the tire pressure failure light on the meter disappears.

There are several ways to eliminate the Golf 7 tire pressure alarm:

1. In the navigation.

Open the navigation, click on the menu, and then click on the original car settings, you can see that the tire pressure, click to enter to set it, and eliminate the tire pressure light.

2. ** button.

If you have changed, find the (original car information) button in it, enter and then find the (tire) button, enter the watch file to (TPMS settings) point reset and press OK. If you haven't changed the stereo, there's a button next to the stereo.

3. The vehicle is in the starting state.

See if the meter shows an image of whether it is the total number of kilometers. Press the steering wheel.

An upward arrow on the left. Press the R key on the table. Press the + sign on the right side of the steering wheel. Restart the car OK, the air pressure light will not be displayed.

4. The multi-function steering wheel is chaotic.

Just find the multi-function steering wheel and reset it.

5. Divided into two cherry cave species.

If there is a tire pressure zero button next to the gear lever, you can set it successfully, and there is also a large screen radio to MIB.

settings. Here's how to fix it:

1. Start the Golf 7 vehicle, the central control screen will light up, and click the button selected in the red box.

2. Find the red box selected "Tire" on the central control screen and click to enter.

3. Click the "set" button selected in the red box to enter the next setting.

4. Click the "OK" button selected in the red box to enter the next setting.

5. Click "Tire Pressure Monitoring Initialization" to eliminate the tire pressure fault light.

Summary. Hello, glad to answer for you. The Golf Caravania tire pressure light is on, but the tires are fine.

Reasons: 1. The tire pressure is too high or the tire pressure is too long. 2. It is a tire leak, the condition of the air leakage is not prominent, and it cannot be seen by the naked eye; 3. The tire pressure system sensor is faulty, resulting in a false alarm.

Hello, glad to answer for you. The Golf Caravania tire pressure light is on, but the tires are fine. Reason:

1. The tire pressure is too high or the tire pressure is too long. 2. It is a tire leak, the condition of the air leakage is not prominent, and it cannot be seen by the naked eye; 3. The tire pressure system sensor is faulty, resulting in a false alarm.

The tire pressure light is on but the tire is fineSolution: 1. Turn off the key first, then turn on the ignition switch, let the driving computer self-test, at this time, the tire pressure alarm sign appears, you can press and hold the tire pressure monitoring button on the right side in front of the gear lever for about five seconds, you will hear a "ding" sound, indicating that the tire pressure reset is successful, and the button can be released.

If the tire pressure light is on while driving, you should immediately reduce your speed and stop slowly to check your tires. If you have your own improvised inflator or guess the bend of the tire pressure gauge, you can drive to the side of the road to measure the pressure of each tire and inflate. If not, you can open it slowly and find the nearest auto repair shop or 4S shop.

If you find that the TPM light stays on and does not go off when you start, you should follow these steps.

1.Turn off the engine first, start the vehicle again after 1-2 minutes, and check the tire pressure value displayed on the dashboard after the vehicle is driving smoothly;

2.Insufficient or too high tire pressure may cause the tire pressure light to illuminate. You can slowly drive the car to a garage or beauty salon to adjust the tire pressure. If you have your own pump, you can adjust it yourself.

3.During the process of inflating or deflating the tires, observe the display of the tire pressure lights on the vehicle's dashboard. When the tire pressure light goes out, it reminds you to stop inflating. If overcharged, excess air is released;

4.If the tire pressure light still does not go out after adjustment, it means that it needs to be turned off manually. The setting can be found in the car's central dashboard to reset the tire pressure, usually by pressing the SET button;

5.If the vehicle does not support manual operation, please check the tire pressure sensor with the maintenance personnel to ensure that the tire pressure is normal, and finally clear the fault code.

When the tire pressure failure light is on, there is no need to rush to reset, but it is necessary to carefully check the possible cause of the failure. On the premise of eliminating tire failure, it is safe and secure to reset the tire pressure indicator.