Which version of CAD is used in 3D takeoff 2018, and what is going on when the CAD2010 can t be open

UV Hello,CAD2020,Installation packages and installation tutorials are available,And sorted out some of the latest software for mechanical use。

Sniffing wx

These friends, generally just used the 2010 version of CAD will always be troubled by not finding the functions that you are used to before, in fact, you don't have to worry, because the functional classification of CAD is very scientific and reasonable, here I recommend two methods for your problem:

1. There are buttons to choose from in the left middle of the "view" of the palette, which are "two-dimensional linear", "three-dimensional linear", "concept mode", "real mode", here you might as well try each mode, which is very helpful for your future three-dimensional modeling.

2. After the menu is brought up (there is a corresponding option on the left side of the title bar), select it in the view menu.

In addition, I have been using CAD to create 3D landscapes recently, so let's talk more about 3D modeling.

Maybe it's a computer problem, change the software, change the 2007 one, I've been using the 07 one.

Although the reason is not clear to me.

But a workaround can be provided.

Just print the electronic drawing into a PDF and read it.

These two software occupy the same system process, so there is a conflict!

If you want to learn CAD, you can take a look: Li Dapang learns CAD, go to his blog to see, he was a secondary school student before, and then found the trick, and now the salary has exceeded 10,000, you see how people learn.

I wish the landlord a speedy learning and welcome to adopt this answer.

Here's why:

The file version is higher than the CAD version, and the quick look at the drawings is supported by any version of the file, so there is no workaround for this problem:

Reduce the version of the file to a lower or equivalent version than CAD, so that it can be opened normally Software: Look at drawings (CADSese Plus) can do this.

1. Open it with a later version.

Second, re-save the opening of a lower version.

3. There is no other way...

You can let someone else save the file as a version you can open with the premium version.

There are two options, either you install a higher version of CAD, or the next CAD version converter.

Pass it to me, I'll help you convert the file version, are you 2007?

It's very obvious to tell you that the version is too low, wouldn't it be nice to install a higher version of CAD?

Brother, it is recommended that you change the version to install, sometimes it is difficult to solve this kind of problem, I used to encounter a similar situation in a company, the system reinstallation can not be solved, and then you can only install a CAD2007 version of the makeshift use. What a tragic !!

I have opened a CAD image sent from another place and cannot be opened because it says "CAD drawing file is invalid", or after a CAD software error, a CAD drawing file cannot be opened, and it also prompts "CAD drawing file is invalid". The CAD drawing file is corrupted and the CAD version is too low, which is the main cause of this "invalid CAD drawing file".

1. If the CAD drawing file is copied from someone else's computer (DWG file), double-click the file and "CAD drawing file is invalid".

1.Check the version of AutoCAD in the other party's computer first, if it is CAD2007 or higher, but the CAD version in your computer is CAD2003, that is, the other party's CAD version is higher than your own CAD version, it may cause this problem.

2. After an unexpected power failure, the computer prompts "CAD drawing file is invalid" when opening the CAD drawing file.

1.Please open "My Computer" - click "Tools" at the top - select "Folder Options" - switch to the "View" tab - > the drop-down slider and uncheck the box in front of "Hide extensions of known file types" - > click OK to exit.

2.When CAD saves the drawing file, a backup file with the suffix bak is also generated, which can be found on the computer. bak file (the same file name as the wrong file name) and copy it to your computer - > will.

bak changed to. dwg.

3. If it is after a CAD software error, the "CAD drawing file is invalid".

1.Open the AutoCAD software, enter "recover" (without quotation marks) in the command line at the bottom of the main window, and then press the enter key, which is the command to repair the CAD drawing file - > the pop-up dialog box to select the wrong CAD drawing file - when > start the repair, if you encounter a stop halfway, press the enter key again to continue repairing the CAD drawing file, until the repair is completed, click OK.

2.Open the CAD drawing file again and the problem should be solved.

4. If the previous three methods cannot solve the problem of "invalid CAD drawing file", use ACME CAD Converter software to convert CAD file directly to PDF format through the converter, and view the CAD drawing file through a PDF reader.

1. Double-click the computer icon to open it, find the tool option in the pop-up dialog box2, click the tool option to find the folder option in it.

3. Click on the folder option to find the view option in the pop-up dialog box5. After setting, we find the file and right-click, find the property option in the right-click menu, click on the property and we modify it to dwg, you can solve the problem.

There are two ways to answer: one is to install conversion software, which has a small file size and simple installation. The other is that installing higher versions of CAD software files takes up a lot of resources. The first method is described below.

5. Open the folder and click on the icon of the convert file program. Open the software.

6. Select to open the DWG file of CAD. At this point, you will be able to open the CAD file that you just couldn't open. Then save the CAD version file you are using now.

After completion, you can use the current CAD version software to open the higher version of the CAD file that could not be opened.

Note: Here the conversion software is better to choose the latest one. This will allow you to open a CAD file drawn in a later version.

I think it should be a problem of the difference between versions, I suggest that you use the higher version to open the lower version must be OK!

DWG is a dedicated file for CAD drawings, and there is no doubt about it, even with DWS, DWT, DXF and many other extensions!

I suggest you do one more step next time you save the image file: that is, "Save the image file" in the dialog box of the save image file, you select the version you want to save, usually set it in the OP (option), and the file is saved as the minimum version of the file file "AutoCAD2000" by default. Then there won't be any of your troubles in the future!

Let's repeat the CAD of the next higher version.

What to convert? Do you mean converting a 2010 CAD file to a 2008 CAD file?

If you have the 2010 version on your computer, why did you switch to the 2008 version? If your computer is the 2008 version, you have the 2010 version of the computer on other computers) save directly, under the save marquee, select save as the 2004 version, and then open the 2008 version of CAD first, select the file, and you can open it directly. Normally, it's fine.

If you still can't open it, it is recommended to reinstall the software!

Generally, it is possible to save as version, if it really doesn't work, try to change the suffix, that is, the suffix name with the version.

It is recommended to save it as a 2004 version.

10 is the new version of the 08 old version of the old version can't open the new version of the file.