What is the reason for the high temperature of Wuling Rongguang water tank

Wuling Rongguang opens the front cabin to see three jugs containing liquids, from left to right are brake fluid (almost transparent in color) and in the middle is glass water (

Generally blue), antifreeze (original green). If you are sure that the liquid in the radiator tank should be green, Wuling cars use antifreeze all year round! Freezing point -40 degrees, boiling point degrees.

In case of emergency, you can add a small amount of purified water, and it is better not to add tap water!

The causes of high water temperature are: less antifreeze, cooling fan not working, clogged water tank and waterway, flushing of cylinder head gaskets, etc.

The solution to the high water temperature of the engine:

1. When the engine temperature is too high, you can use your hand to touch the temperature of the upper water pipe and the lower pipe to judge, if the temperature difference between the two water pipes is large, you can judge that the thermostat is not working, if you can't buy accessories on the way, you can remove the thermostat for emergency, and replace it immediately after going home.

2. If there is air in the cooling system, it will form air resistance, which will make the cooling water circulate poorly, resulting in high engine temperature. The following methods can be used to deflate: let the engine run at high speed, gently unscrew the water tank cover until the gas is just released, at this time, some cooling water will flow out with the gas, and so on many times until you feel that the gas is exhausted (at this time, touch the upper and lower pipes with your hands, and the temperature will be significantly different from before the gas).

After troubleshooting, the cooling water should be replenished in time.

3. If the vehicle is driving on a dirt road or muddy road for a long time, there will be some dirt adhering to the radiator, which will affect the heat dissipation effect over time and cause the water temperature to be too high. In this case, you can blow the radiator grid with compressed air first.

4. If the temperature is too high or the temperature indicator light keeps flashing, stop to check whether the cooling water of the water tank is normal, and whether there is leakage at the water tank and water pipe. If no abnormality is found through inspection, you can continue driving after replenishing the cooling water. If the temperature is still too high after driving a certain distance, and the cooling water is reduced after stopping for inspection, this is mostly due to the loss of sand hole or perforation in the water jacket of the cylinder block.

5. In the process of driving, if the water temperature is too high, it must not be washed with cold water, so that the cylinder may break; You should also not rush to open the lid of the water tank, so as not to hurt people with boiling hot water. Turn off the heat and wait for about 20 minutes before opening the lid of the water tank and adding cold water for emergency.

Hello, this case check the coolant.

Whether the waterway is smooth or not, and then it is a matter of the sensor.

2. When we encounter an alarm of high water temperature, we should first slow down, and then drive the car to the side of the road, and do not rush to turn off the engine, because the water temperature is too high, which will lead to pistons, steel walls, cylinders, and crankshafts.

When the temperature is too high, the oil becomes thinner and loses its lubricating effect. If the ignition is turned off at this time, the parts are in a state of expansion, and the gap between the accessories is very small, which will cause some soft metals to fall off after the shutdown, and some will even cause the cylinder to stick. So when you find that the pot is boiling, do not turn off the heat immediately, but keep idling for the time being.

Running, trying to cool down. Do not pour cold water on the engine when cooling down, as this may cause the engine block to burst due to quenching. The right way is:

Put on gloves, add a multi-folded damp cloth to the water tank lid, gently unscrew the water tank lid and wait for the water vapor.

Drain it slowly, and after the pressure in the water tank drops, add cool water or antifreeze.

3. In case of emergency, you can turn on the heater to help cool down.

4. Hello, check whether there is less water in the water tank, and then see if the cooling fan is normal, and check the sensor.

5. Check whether the oil and coolant are insufficient, if they are missing, add them to the specified position, and check the water temperature thermostat if they are not missing.

Whether it is damaged, see if the cooling fan is running normally, if it is normal, you need to remove the engine carbon deposit or replace the four supporting solutions.

6. You can check it to see if the sensor is broken and can be replaced. There may also be a problem with the water tank, for reference.

7. Check whether there is water leakage? Is the cylinder gasket broken? Thank you!

If the engine water temperature is too high, the solution is to find a place to park and let the vehicle idle without turning off the engine.

What is the reason for the high water temperature of Wuling Rongguang? What is the reason for the high water temperature of Wuling Rongguang? The main reasons for the high water temperature of the engine:

1. The system is dirty and the inside of the thermal radiator tank is blocked. 2. The machine is blocked, such as the thermostat is working poorly or damaged, and the water pump is working poorly. 3. Air resistance and engine failure lead to high pressure in the cylinder entering the cooling system.

4. Poor heat dissipation, such as the speed of the cooling fan is too low. The air ring is broken, and the surface of the tank is too dirty. 5. The phenomenon that the cooling fan is turned on late in the car using the electronic fan is the main reason for the high water temperature of the trolley.

To solve the problem of turning on the electronic fan, you can use the (engine anti-high temperature and fuel saving protector) to solve the problem. @2019