What are the precautions for subject 2 and the precautions for taking subject 2?

Be sure to pay attention to what the lights on the dashboard represent, and pay attention to the points of each item.

<>Adjust the seats and mirrors

When you start to learn to drive, especially when you are in the garage, you must remember how to adjust the seat and rearview mirror taught by the coach, and adjust it every time you get in the car. Simulations and exams should also be tuned according to this standard.

Because all points with the car as a reference will be affected by the front and back of the seat, the height, the height of the backrest, the adjustment of the rearview mirror and the height of the individual, especially the rearview mirror.

Control the clutch

This is very important, needless to say, do it slowly and non-stop, it will also be very helpful to learn to start half-slope, clutch control is not good and easy to stall.

Wait in a non-test area

Encounter other vehicles in front of you for the test. Candidates in front of you will wait in the parking area before you finish the test, and if you enter the test area and then park, you will have to park in the middle of the road.

Adjust the status

If you feel that your hands and feet are shaking or the rearview mirror is not adjusted properly during the test, you can stop in this area and pull the handbrake, adjust your breathing and start in the normal order.

Learn to see the crimping line and angle by yourself

We have to learn to judge for ourselves whether we are doing it correctly or not. If you don't know how to watch, you won't judge whether you can press the line and press the angle, and no matter how hard you practice, it will be in vain.

Exam completed

Before you hear the command "the test is over, the score is passed", do not unbuckle your seat belt, stop or get out of the car in advance; After the test, arrive at the designated place and sign to confirm the results, and then the whole subject 2 test will be completed.

Exam Sequence:Reversing into the garage Ramp fixed-point parking and starting Side-oriented parking Right-angle turning Curve driving (S-bend) may be different in different areas.

Pay attention before the exam room

Wear flat shoes and comfortable clothes for easier handling. If you are a myopic student who wears glasses when collecting information, you must also remember to wear glasses during the exam. Remember to bring your ID card, go to the test room in advance, and pay attention to whether your name is called at any time.

I wish you all the best in the second exam!

1.Adjust the seats and mirrors

Because all points with the car as a reference will be affected by the front and back of the seat, the height and the angle of the backrestMirror adjustments and personal height, especially mirrorsTherefore, it is especially important to adjust the seat and mirrors. Unless you're too skilled, it's good to tune it up and learn to be flexible.

2.Control the clutch

Do it slowly and non-stop, and when changing gears, the clutch must be stepped on to the end. Loosening the clutch must be slow. It will also be very helpful to learn to start halfway upClutch control is not good, and it is easy to stall.

3.Find the right way to practice effectively.

The method is not right, and the effort is in vainSuffer in vain. You can find a way to see something that suits you online, orAsk your friends who are learning to drive together.

4.Learn to see the crimping line and angle by yourself

When you practice, it's not that the coach keeps staring at you, or that you always have a friend who accompanies you to watch for you. If we don't predict whether we will press the line and press the angle, no matter how hard we practice, it will be in vain. Beginners can stop and get out of the car to confirm whether the line is pressed and the angle is pressed

5.Adjust your mentality, and guard against arrogance and rashness for both those who learn well and those who are not

Avoid:Unfastening your seat belt before the test is over or forgetting to fasten your seat belt before starting the test; Forget to turn signals when parking on the side and turning at right angles; Failure to follow the rules of the test room and step on the accelerator; Pass the exam and get carried away with your hands behind the wheel; The vehicle is turned off and the gear is ignited; I was too excited to get to the last project, and I made a mistake in operation.

6.Pay attention to the peers who practice and test together

Don't practice with a negative and irritable partner, having a reliable practice partner will be very helpful for you.

7.Complete one item during the exam and think about the next one and the precautions

8.Keep it in your hands

It is best to practice twice a day a week before the exam to avoid being born or careless due to long-term non-training.

9.Keep up your energy

The waiting time for the second exam is relatively long, and I often leave before dawn to wait for the exam for more than half a day, prepare dry food, and pay attention to cold and heat prevention. If the person who doesn't wait is hungry and sleepy, distracted, and inattentive, it will definitely affect the exam.

10.Luck + character.

Although it is more reasonable to make an appointment for the exam after practicing well, people who practice badly may also be lucky enough to pass the exam. I hope you all go well!

Before the test: 1. Candidates must bring their ID cards and admission tickets, and go to the waiting hall 30 minutes in advance to verify their fingerprints and receive the sign-in number according to the date of appointment and the number of examinations.

2. Wait in the waiting hall, please pay attention to the hall broadcast and pay attention to the information displayed on the screen in the hall, and the voice prompt tone is "Please take the test from the *** to the ** car".

During the test: 1. Quickly adjust the seat, rearview mirror, and fasten the seat belt after getting in the car.

2. Verify your fingerprint when everything is ready, and enter the corresponding test according to the voice prompts.

3. After the vehicle is turned off, the gear must be in neutral gear before it can be started.

4. Reversing into the warehouse, pay attention to the two front wheels to press over the dotted line before reversing.

5. Turn on the turn signal before entering the project area at a right angle, and turn off the turn signal before the car stool enters the project area and starts to do the turning action.

6. Pay attention to the handbrake action for the ramp starting project.

7. There is no limit to the total time of the test, only when the vehicle is reversed into the garage, the side parking and the ramp start is limited.

c) After the exam.

1. If you fail the first chance test, then take the second test, the test process is the same as the first time, and it is the same car, you can go through the process after the first mistake, relax and familiarize.

Precautions for the second exam:

1. Reversing into storage.

When the car drives to the starting position, the body should press the white line in front of the right side of the garage, but not exceeded. When reversing, pay attention to the line point, kill the direction, and look at the library point through the rearview mirror. After the car enters the garage, it must be returned to the right body.

Be careful not to pour too much after entering the warehouse, and stop when entering the warehouse. When leaving the garage on the left, pay attention to the distance between the left body and the garage line, and adjust the steering wheel appropriately. The left out of the warehouse should be out to the specified position.

Do not stop, slip, shift, turn off, etc.

2. Side parking.

When the car is driven to the test position, the body cannot be pressed with white lines. Pay attention to adjust the distance between the body and the edge of the library, and the distance between the body and the library, at least the rear wheels of the car should exceed the edge line of the library. When hitting the direction, you should look at the line.

After entering the warehouse, you should hit the left turn signal, honk, and the car can not press the corner of the warehouse when leaving the warehouse. Do not stop, slip, shift, turn off, etc.

3. Turn at right angles.

When driving, pay attention to the distance between the body and the right edge line. Look at the speed of the car when cornering and find the right time to kill the steering wheel. After killing the steering wheel, if the left rear wheel is angled, you can return to the steering wheel appropriately. Do not stop, slip, shift, turn off, press the line, etc.

4. Ramp fixed-point parking and starting.

Uphill to play the right turn signal, slow down, the right wheel and the edge line of the car to control the distance between the rent at 30cm. When arriving at the specified position, the speed should be slow, which is conducive to accurate point finding. Before starting, hit the left turn signal and honk the horn to find the semi-linkage state.

Stops (except for fixed points), slipping, shifting, stalling, and pressing lines are not allowed on the way.

5. Curve driving.

After the car enters the curve, it has to make a big turn. Control the speed of the car as much as possible to maintain a constant speed, the curve to see the point, the direction to be fast, back to the right should also be fast, the middle can not stop the car, slip, shift, stall, line pressing, etc.

The notes and details of subject 2 are as follows:

1) Step on the clutch first, hang 1st gear, turn on the left turn signal, press the horn, release the handbrake, and then slowly release the clutch, and the car moves forward slowly.

2) The first level of reversing into the warehouse, when the body arrives at the test area, the speaker in the car will remind you that "the reversing warehouse test begins".

3) After the car enters the warehouse, the car must be right, do not turn left and right.

4) After entering the warehouse, pay attention not to pour too much, stop when entering the warehouse, 5) pay attention to the left out of the warehouse, look at the size of the left body distance from the library line, and adjust the steering wheel appropriately, 6) the left out of the library must be out of the library to reach the specified position, 7) in the whole process can not stop, can not slip, can not fall gear, can not turn off, can not shadow line. (Some cannot cross the line).

Precautions for right-angle turns:

1) When the car is moving forward, adjust the distance between the body and the right edge line, 2) Wait until the car reaches the corner, and the steering wheel should be killed according to the speed of the car.

3) After being killed, you can stretch out your head to see if the left rear wheel of your car can press the angle, and if it can be pressed, you can properly return to the steering wheel.

4) During the whole process, you can't stop, you can't slip, you can't drop gears, you can't turn off the engine, and you can't press the line.

Fixed-point climbing and starting precautions:

1) When the car is going uphill, you should turn right and do not go fast. Generally, the right wheel of the car is 30 cm away from the edge line. Control this distance.

2) When arriving at the specified position, the speed of the vehicle should be slower, so that it can find the point more accurately.

4) In the whole process, you can not stop (except for fixed points), you can't slip, you can't drop gears, you can't turn off the engine, and you can't press the line.

Subject 2 Exam Notes:

1. Have a steady mentality and don't be nervous during the exam.

2. The speed should be slow and uniform, and the clutch must be well controlled.

3. If there is a sign of stopping when the direction hits a circle and a half, you should immediately loosen a little clutch, otherwise it will give you a "halfway stop" within 3 seconds.

Subject 2 is part of the motor vehicle driver's license assessment, which is the abbreviation of the field driving skills test subject.

The following are the test items of the C1C2 test of the trolley:

1. Reversing into storage.

2. Side parking.

3. Ramp fixed-point parking and starting.

4. Turn at right angles.

5. Curve driving (commonly known as S bend).

Precautions for reversing and warehousing:

1. The car drives to the starting position, the distance of the body offline, the body should press the white line in front of the right side of the library, but do not exceed.

2. When reversing, you should pay attention to the line point, kill the direction, how to practice at this time or how to test, and look at the library point from the inverted mirror.

3) After the car enters the warehouse, the car must be right, do not turn left and right.

4. After entering the warehouse, be careful not to pour too much, and stop when entering the warehouse.

5. Pay attention to the left side of the garage, look at the size of the left body distance from the library line, and adjust the steering wheel appropriately.

6. The left out of the warehouse must be out of the warehouse to reach the specified position.

7. During the whole process, you can't stop, you can't slip, you can't drop gears, you can't turn off the engine, and you can't shadow the line. (Some cannot cross the line).

Subject 2 exam notes and details are:

1. When taking the subject 2 exam, you must not forget to wear your seat belt, first adjust to the sitting position that suits you after getting in the car, then adjust the rearview mirror, and then fasten your seat belt to prepare for the exam.

2. When taking the subject 2 exam, the rearview mirror is very important. The Subject 2 exam is a key test conducted in a closed venue, and the Subject 2 exam includes reversing into the garage, side parking, ramp start, S road and other items.

3. For most candidates, it is more difficult to start on a ramp and reverse into storage. At the start of the ramp, if the ignition is turned off, you will be deducted points. When reversing into the warehouse, you can't press the solid line Zheng Liangzai, otherwise the exam will not pass directly.

4. The trick of reversing into storage is to judge the distance between the rear wheel and the two solid lines through the rearview mirror, as long as this distance is mastered, then you can drive into it smoothly. At the start of the ramp, the test is the half-joint shouting technique, if the clutch pedal is loosened too quickly, it will directly cause the engine to stall.

Subject 2 Exam Assessment:

Qualification criteria: The full score is 100 points, and the evaluation criteria for unqualified, 20 points, 10 points, and 5 points are set. Those who meet the following requirements will pass the examination:

Those who apply for large buses, tractors, city buses, medium-sized buses, and large trucks with a score of 90 points; Those who apply for other quasi-driving types have a score of 80 points.