How the network is connected and how to connect to the network

You need to install broadband, then open the broadband connection, enter the username and password provided by the operator, and click to connect.

If broadband is installed, you can't connect.

Cause Analysis]:

Because the network connection prompts normal, it can also be connected to the network, and the network card hardware and driver problems can be eliminated, which may be caused by the network protocol of some security software loaded in the local connection, which causes the data transmission to be unable to be carried out normally during the sending or receiving of data packets.

Easy Steps]:

Check Network Settings] - [AnyViewNat Service] - [Cancel Third-Party Network Protocol].

Solution]:

1.Check the network settings, and find that there are more [AnyView NAT Service] items (or other third-party network protocols) in the list of local connections and wireless network connection protocols, and after canceling this item, the network can be accessed normally, and the webpage and QQ can be opened normally. After testing, if the [AnyView NAT Service] item is selected, the fault will recur.

2.It is recommended that when you encounter similar problems, you can check the protocols loaded by the local connection, keep only the standard network protocols (as shown in the figure), and cancel the third-party network protocols for retesting. If a network protocol is required for work, it can be retained.

3.Wired network connection mode.

Hello <>

Kiss! <>

The method of connecting to the network is as follows: 1. Connect the router to the broadband, and then connect the router to the computer with a network cable. 2. Move the mouse to "Network", right-click, select "Properties", and open "Network".

3. After opening "Network", enter the interface and select "Set up a new network connection" below. 4. Click to open "Set up a new network connection" and then enter the interface shown below, and then click "Manually set my connection", "Connect with a broadband connection that requires a username and password", "ISP name"; Finally, enter the "Username" and "Password", then click "Next" until the confirmation is completed, and click "Connect" to access the Internet. How to buy a computer 1, class, document use Recommend ASUS office business notebook, Zenbook series, vivobook series, ADOL series, and Boulder series.

2. Play games generally choose i5 CPU of more than 8 generations, graphics card selection GTX1650 or above, memory 8G standard configuration 16G is the best, there must be solid state, this kind of book is about 6000 above the price. ASUS Chosen 2, Flying Fortress Air Series or Flying Fortress 8 are recommendedROG Republic of Gamers series.

3、Biased to draw,Audio**Editing function is recommended to choose i7 8 generations or moreCPU,As long as the graphics card is not too slowing down, it is OK,Memory8G standard configuration16G is the best,This kind of book is about 6000-7000The price of about 7000 yuan。 We recommend the ASUS Zenbook X Vertical and Horizontal, X Xiongtu series, and Tianxuan Air series.

With the increasing popularity of the Internet, connecting to the Internet has become an essential part of people's daily lives. But for some people who don't know about the Internet, especially the elderly, how to connect to the Internet is still a difficult problem. Here are some ways to help you connect to the internet.

1.Use a wired network connection.

For users using a wired network connection, you need to prepare a network cable and a router. First, plug the router into the power supply, then plug the network cable into the WAN port of the router, and plug the other end into the LAN port on the computer. Then turn on the computer and turn on the network connection function to connect to the network.

2.Use a Wi-Fi connection.

To use a Wi-Fi connection, you need to prepare a wireless router and a Wi-Fi capable computer or mobile phone. First, plug in your router and connect it to the Internet, then search for a nearby Wi-Fi network on your computer or phone, and find and connect to the wireless network you need in the search results.

3.Use a mobile data connection.

If you are using a mobile phone to connect to the Internet, you can connect to the Internet by turning on the data connection of the mobile phone. Find the "Mobile Network" or "Data" option in your phone's settings and turn it on to connect to the Internet.

The above are a few common ways to connect to the network, but it should be noted that when using wireless connections, you need to improve network security awareness, set passwords and encryption and other measures to prevent the network from being illegally invaded and attacked.

In general, connecting to the Internet is not a complicated matter, you only need to prepare the corresponding equipment and set up the corresponding network connection method, and you can enjoy the convenience of the Internet anytime, anywhere.

As long as you turn on the data traffic, turn on the data traffic switch and the network will be connected, and you can connect it with the password to log in to wifi at home or in a public place.

Here's how to connect to your home's wired broadband:

1. Find the broadband connection icon on the desktop of the computer, right-click to open the menu, find the connection option, and click Select.

2. In the connection panel that opens, enter the username and password of the broadband, if you forget, you can inform the relevant operator.

3. After entering the account and password of broadband, click Connect below to connect to broadband.

What do you mean to connect to the Internet, trouble to make it clear, computers, laptops? Cell phone?

Tools Raw materials.

Computer win7 broadband.

Method steps.

1. On the desktop, click [Start] -- Control Panel -- View Network Status and Tasks.

2. Enter the new interface and click [Set up a new connection or network].

3. Click [Connect to Internet] -- Next].

4. Click "Broadband (PPPOER)(R)".

5. Enter the username and password given by the operator.

6. Click "Connect" to connect to the network.

If your phone needs to use data to surf the Internet, here's how to do it:

Pull down the top curtain of your phone, tap [Mobile Data] and [Data Connection] to make it green to indicate that it is on.

If you are unable to access the Internet with data data, we recommend that you try the following steps:

1. Check whether the SIM card is enabled for GPRS Internet service or temporarily closed.

To use the mobile phone data Internet function, the ** card needs to activate the data data Internet service. You can contact the local network provider of **card** to open the data traffic Internet service.

2. Check whether the "Mobile Data" switch is turned on.

Slide your finger down on the top curtain of the screen and turn the "Mobile Data" dot green.

3. Please try to replace it with another ** card.

4. You can also try again in a different time period or network environment.

5. Back up the mobile phone data (**book, SMS, **, etc.), restore the mobile phone to factory settings, if the fault persists, it is recommended to send the mobile phone to the nearest service center for testing and maintenance.

For details on how to connect your mobile phone to mobile data and Wi-Fi, please refer to:

Turn on mobile data Internet access on your phone: pull down the top curtain of the screen, tap [Mobile Data] [Data Connection], and green means on.

If it is a dual-SIM phone, after turning on mobile data, go to Settings - SIM Manager - Data Service Network - Select SIM Card 1 or SIM Card 2.

Note: Some telecom dual-SIM phones do not support the use of mobile Unicom cards to access the Internet.

How to connect your phone to Wi-Fi:

1.Slide down the top curtain of the screen - tap the WLAN icon, the icon turns green, which means that the Wi-Fi function has been turned on.

2.Press and hold the WLAN icon to enter the WLAN setting interface, after turning on the wireless network, the phone will automatically search and display the name of the wireless network that can be connected, click the name of the wireless network you want to connect to - enter the password - click to connect.