What should DJI drones pay attention to when flying

Please pay attention to the following points when flying the aircraft:

1. Please observe the flight environment before takeoff.

2. Please calibrate the compass and IMU before takeoff.

3. Please set the appropriate return altitude and pay attention to the prompt of automatic return to home when the battery is low.

4. Power on the aircraft on the ground, do not power on during shaking, otherwise it will cause the aircraft's heading axis to drift.

5. Turn on the multi-mode switch in the DJI Go app, and manually switch to attitude mode after the aircraft compass is disturbed, which will turn off the work of the compass and GPS module. In this case, the auto-return function is invalid.

6. Try to be as soft as possible when the remote controller hits the lever, and under normal circumstances, do not continue to fly with the full pole to avoid drifting too fast due to excessive inertia when the aircraft turns. Prevent errors in judgment and ensure flight safety.

In order to ensure the normal flight of your aircraft, it is recommended that you fly in an open and interference-free flight environment, and please avoid using your aircraft in the following environments:

1. Pure color surface, such as pure black, pure white, pure red, pure green;

2. Surfaces with strong reflection or reflection;

3. Water surface or transparent surface;

4. The surface of a moving object, such as above **, above a shrub or grass blown by a strong wind;

5. In scenes where the lighting changes violently and rapidly;

6. Particularly dark (light less than 10 lux) or very bright (light greater than 10,000 lux) surface;

7. Material surfaces that have strong absorption or reflection of infrared rays, such as mirrors;

8. Particularly sparse textured surface;

9. The surface of an object with a high degree of texture repetition, such as a small lattice brick of the same color;

10. Rain, snow and other weather that may cause the aircraft to get wet.

11.Do not fly in bad weather, such as strong winds (wind speed 5 or above), snow, rain, foggy weather, etc.

12.Choose an open place with no tall buildings around it as the flight field. Buildings that use a large number of steel bars will affect the work of the compass, and will block the GPS signal, resulting in poor positioning of the aircraft or even impossible to locate.

13.When flying, stay in sight and stay away from obstacles, crowds, water, etc.

14.Do not fly in areas with high-voltage lines, communication base stations or transmission towers to avoid interference with the remote controller.

5.If you are flying above 5,000 meters above sea level, the performance of the aircraft battery and power system will be reduced due to environmental factors, and the flight performance will be affected, so please fly with caution.

16.In the Arctic and Antarctic Circles, the aircraft cannot fly in p-mode and can fly using a vision system.

First of all, take a look at the ** tutorial, as well as the manual. Once you get the plane, don't get too excited, follow the instruction process step by step to activate the plane, and then you can start the test flight. If you are a novice, it is highly recommended to go to an open place with few people to test fly, and in the daytime, because the effect of aircraft visual positioning recognition is not so good due to insufficient light, pay attention to safety.

Related References:

Summary. How does the DJI drone exit the intelligent flight mission?

Hello dear, when you use the app for the first time, the aircraft is in "Novice Mode" by default, and in Novice mode, the height of the aircraft is limited to 30 meters and the distance is limited to 30 meters. So how do you turn off the newbie mode? 1. First open DJI GO, then click on the upper left corner of the app interface, and then tap the slider to turn off "Novice Mode".

How does the DJI drone exit the intelligent flight mission?

When you use the app for the first time, the flight dongyan is in "novice mode" by default, and in novice mode, the height of the aircraft is limited to 30 meters and the distance is 30 meters. So how do you turn off the newbie mode? 1. First open DJI GO, then click on the upper left corner of the app interface, and then tap the slider to turn off "Novice Mode".

4. Click on the next line and fill in the "height limit". 5. Click on the next line and fill in the "Distance Disturbance". The above is the Fang Na Li Yinfa of DJI drones closing the novice height limit mode, I hope it can help you.

If my answer is helpful to you, please give a thumbs up (comment in the lower left corner), look forward to your like, your work is very important to me, and your support is also the dynamic and vertical momentum of my progress. Finally, I wish you good health and a good mood!

Ask about custom messages].

Aerial Photography Aircraft Series]: Aircraft, remote controller, and goggles equipment short press the battery switch once, and then press and hold the battery switch for more than 1 second to turn on and off;

Power on and off. The aircraft is powered on.

Press (release) briefly (release) and then press and hold the power button for about 1 second to turn on the aircraft.

The aircraft is powered off.

When the aircraft is powered on, press (release) briefly (release) and then press and hold the power button for about 1 second to turn off the aircraft.

The method of turning on and off the remote controller is the same as that of the aircraft.

Takeoff. After the aircraft is powered on and connected to the remote controller, it can take off in one of the following ways:

Automatic take-off. dji fly

Please click Enter a description.

dji go 4

Please click Enter a description.

Manual take-off. After the aircraft is turned on, the remote controller will play the lever for about 2 seconds according to the diagram below, and the propellers will start to rotate. Then hit the ascending rod and the aircraft can take off.

Please click Enter a description.

Taking the American hand as an example, the rising lever is the left joystick of the remote control, and the aircraft can take off by pushing the joystick upwards.

Please click Enter a description.

Landing. Automatic landing.

When the aircraft returns to the vicinity of the Home Point and is in the air of a landable location, tap the button on the flight interface of the DJI FLY app, and then press and hold "Land", and the aircraft enters automatic landing.

Landing manually. After the aircraft returns to home, or needs to land after the flight (at this time, the aircraft is already in the air of the landing place), you can push the left joystick down, and the aircraft will slowly descend, and when descending to the ground, continue to push the joystick downwards for about 3 seconds to stop the motor, and the aircraft will complete the landing.

Press the power button of the drone once, and then press and hold the power button for 2 seconds to power off.

Here's how to take care of your battery:

1. Use a full-charge battery to avoid misestimating the battery life before the flight, and be sure to fully charge the battery to ensure that the battery is in a full state.

2. Pay attention to the ambient temperature, and preheat the battery in a low temperature environment. The suitable working environment temperature of the battery is between -10 and 40 degrees ("Enlightenment" 2 is -20 40 degrees). In a low temperature environment below 5 degrees, the battery needs to be fully preheated to more than 20 degrees.

After takeoff, keep the aircraft hovering for about 1 minute to allow the battery to heat up internally.

Allow yourself to warm up sufficiently.

My DJI drone Xiao take-off is not high and the bridge is controlled, what's going on, pro, hello sensitive ruler! There are several reasons for this to lead to the loss of control of the UAV: 1. One of the reasons for the loss of control of the flight control system is the collapse of the flight control system, which may be caused by the loss of GPS signals, or the interference of electromagnetic interference and high-power transmitters.

In some environments with electromagnetic interference, the loss of control of the drone is a matter of luck, if you are lucky, you will come back automatically, and if you are unlucky, you will blow up the plane directly, and the calf will be finished, so you should try to avoid flying in these places. Second, one of the reasons for high-altitude failure is machine failure. If it happens at this time, if the drone is high in the air, there is no way to do it, you can only watch it explode, and the pain is just a few seconds.

Therefore, in order to rule out the occurrence of this kind of situation, you need to prepare before taking off, carefully check the parameter settings of the drone, and whether there is no damage to the hardware. Hope it helps!

DJI drones can use different mobile phones to fly in the tomb, as long as these mobile phones have been ** and the corresponding DJI GO app is installed, you can control the take-off, landing, flight, photo, video and other operations of the unmanned drone by connecting the drone's remote control and mobile phone. The same drone can be connected to multiple hand-state attendants at the same time, only need to connect the remote control to the drone, and connect the mobile phone to the remote control device, and the mobile phones will not interfere with each other. It can be controlled with different mobile phones, which is convenient for users to operate more flexibly, and it is also convenient for multiple people to share or alternately control the same drone.