My Wi Fi. I forgot my password. What to do?

If you forget your broadband password, you can retrieve it in the following ways:

1. Dial 10,000 to manually enter the ID number when handling broadband according to the prompts.

2. Bring your ID card to the local telecom business hall for checking.

3. If you bind your mobile phone number, you can use your mobile phone to log in to China Telecom's online business hall self-service, broadband zone, and password management. To learn more about service offers, click on the "****" customer service below to answer for you.

Consult the operator.

For example, for China Mobile Henan, the WLAN service supports dynamic passwords and static passwords, and the passwords of the two services are independent of each other. The one-time password is only applicable to the authentication page of the webportal, which has a short validity period and good security. The one-time password is requested by the customer at each login; The static password is obtained when the customer activates the WLAN service, and the customer can use the same password every time he logs in.

1. How to obtain dynamic password: As long as the customer clicks "Apply for dynamic password", he will receive a text message for temporary authentication password. The one-time password is valid for 15 minutes, and the one-time password will automatically expire at the end of the validity period. During the validity period, the customer logs in with the one-time password, and the one-time password will automatically expire after the login is successful.

2. Static password acquisition method: reset the WLAN password SMS command "czwlanmm" to 10086, the password is reset successfully, and the returned SMS can be received.

There are several possibilities:

1. If the password is incorrect, check the case and check the password of the wireless network again in the router settings page.

2. If the DHCP function of the router is not enabled, the mobile phone cannot obtain the IP address.

3. Check whether the name of the connected wireless network is your home wireless network.

4. The router has not been restarted after it has been configured, and the configured content has not been enabled.

This can be solved in the following ways:

1. Install an antenna on the wireless client to enhance the receiving capability. If there are many clients that cannot connect to the wireless AP, install an omnidirectional antenna at the wireless AP to enhance the transmitting capability.

2. Check whether the wireless AP or wireless router is working properly by looking at the LED indicator, and use a laptop for a close test.

3. If the wireless client uses an antenna, try to adjust the direction of the antenna to make it face the direction of the wireless AP or wireless router.

4. Set the correct IP address for the wireless client.

5. Check the security settings of the wireless AP or wireless router, and set the MAC address of the wireless client as a trusted MAC address.

The solution to the problem of forgetting the password of the network is as follows:Computer: Lenovog460

System: Windows 11

1. Click Settings in the Start menu.

2. Click Network & Internet.

3. Click Change adapter options.

4. Right-click WLAN and click Status.

5. Click on Unlimited Attributes.

6. Click Security, and the tab checks the display characters to complete. Bush is missing.

Whether it is at home or in the company, or in the shopping mall outside, we can use the wireless network to enjoy the network world, if you want to log in to the wireless network, you generally need to enter the wireless password, so what should I do if I forget the wireless network password? Let's take a look with me.

What should I do if I forget my wireless network password?

1. Check the password through the computer.

1) When the user forgets the wireless network password, he can retrieve it through the computer. Find the networking icon in the lower right corner of your computer, then left-click, then find your wireless network in the pop-up page, right-click, and select "Properties".

2) In the properties interface, select the "Security" option. Then on the security page, check the box in front of the "Show character (h)" under the "Network Security Key (k)", and then we can see what the password of the wireless network is.

2. Check the wireless password through the router.

If the password of the wireless network has not been changed by the user, the user can directly flip the back of the wireless router to view, and the back will generally be marked clearly what the wireless password of the wireless router is, and the user can generally connect successfully as long as the connection is based on this wireless password.

3. Use your mobile phone to log in to the modem or router to check the wireless password.

1) Find the "Settings" icon on your phone, then select "WiFi Settings Options", click on the connected network point, and then you can see the IP address in the pop-up page, in general, the IP address of the mobile phone is: , and the default address of the router is generally.

2) Next, you should open the browser of your phone, enter :: in the browser, and then click the enter key, and then you will enter the login page of the router, enter the username and password of the router according to the prompts, and then click to log in. If you have forgotten your router's username and password, you can usually find it on the back of the router.

3) After logging in to the management page of the router, select the "Network" option, and then select "WLAN Configuration", and then you can see the wireless password, the wireless password is generally defaulted to a decimal point, if you want to see what the wireless password is, you can click "Click here to show" next to it, and then you can clearly see what the wireless password is. If you want to change your wireless password, you can enter a new wireless password and click the Save "Save App" button.

The above is a detailed introduction to what to do if you forget your wireless network password, and I hope it can help you solve the problem of forgetting your wireless network password. When you forget the wireless network password, you must take appropriate methods to find the wireless password, otherwise you will not be able to connect to the network.

Operating equipment: Lenovo Tianyi 510S.

Device system: Windows 10.

Operating Software: Browser.

1. Enter the management address of your home wifi on the computer, enter the management password and click OK.

2. Enter the wifi settings interface, find and click the routing setting option below.

3. After entering the routing settings interface, click the wireless settings option on the left.

4. Find and select the information box of the wireless password on the right, where you can see your wifi password by sliding the number.

<>1. If other people's mobile phones in the family support Wi-Fi sharing, you can open the phone's settings and click WLAN. Then click on the wifi at home to share, scan the *** with a browser, and the text you see will also contain the wifi password.

2. There is no mobile phone that can share the wifi password, but you know the management password of the scattered router, in this case, you can connect the computer and the router with a network cable. Enter the administrator password of the router in the address bar of the computer browser, and you can view the wifi password on the wifi page.

3. You can restore the factory settings by dismantling the spring device and reset the wifi password.

What to do if you forget your wifi password, teach you a trick to easily retrieve it.

Enter the address of the router management interface, the default is or, and then enter the account password to log in, the default is admin, and then switch to wireless parameters - wireless security, and you will see the password set.

The first step is to restore the wireless router to the factory, the second step is to enter the router to set up, generally there is a description for buying a wireless router You can follow the instructions to set up the wireless network, it really won't hit ** please set up the computer company's personnel.

First of all, through or into the router management background, you can directly change the password. If you have forgotten the administrative password to access the router, you can reset the router to zero, that is, there is a small button on the back of the router, and after a few seconds of pressing, it will be restored to factory settings, and you can reset the new password.

If you still remember the login password of the wireless router, you can go to the router management interface to check the wifi password.

Generally wireless settings - wireless security settings, the right pane can see the wifi password.

If you even forget the router's management password, then you can only restore the router's factory settings and reconfigure it.

Factory reset method:

When the router is powered on, press and hold the reset button for 10 seconds, and all indicators will flash once, and the recovery will be successful.

If you forget the wireless network password, you can reset it, there is a reset button on the back of the router, press and hold it for a few seconds to restore the route to factory settings. After resetting the factory settings, re-set the router, open the browser, enter the router login address, enter the router's login username and password in the pop-up window, and enter the broadband account and password according to the setup wizard. Click [Wireless Settings] in the router settings interface, set the name and password of the wireless network, and then search for the set wireless name through the computer to connect.

Taking Henan customers as an example, if you want to query the password of the broadband, you can send SMS "czkdmm" to 10086 to reset the broadband password. If you are setting up a router, you can click on **Home Broadband Common Operations and Settings to query the router setting method.

Due to the differences in business content in each province, you can call the local 10086 for consultation for specific situations.

Click "Change Adapter Options", right-click on the properties of the connection, and select "Status".

On the status page, click "Wireless Properties", select the "Security" tab, and select "Show characters".