How to replace a badminton racket with a sweat wicking handle

The handle of the hairball racket can be changed. However, you need to find a professional to replace it, and if you replace it yourself, it is easy to accidentally injure the racket, and it may affect the performance after replacement.

Protection of the handle:

1) The handle skin that wraps the wooden inner core of the racket handle should be made of material that is not easy to permeable and soft and shock-absorbing, because the wood is not only easy to breed mold in a humid and airtight environment, but also makes the handle smelly and easier to decay.

2) The handle skin wrapped in the wooden inner core is made of a material with a certain thickness, open pores or not easy to permeable, which is conducive to the volatilization of sweat and can also play a role in cushioning to make the feel comfortable, while the outer glue can be wrapped in different ways according to the size of each person's palm.

3) The outer glue is thinner than the inner glue, and its water absorption and air permeability are stronger than the inner glue, such as hand sweating more, only need to wrap two or three turns around the handle with toilet paper after use, and the water can be brought from the inside to the outside through dry and wet infiltration, so that the wooden handle will not be in a humid environment for a long time.

You're talking about hand glue, this is generally sold in badminton stores, or stadiums, generally bought in these places, you can let the clerk help you wrap up, the brand, yy, victory, boiling are good, it is also a more common brand in the store, I personally prefer Federer to use a Wilson's white mesh feather universal hand glue, **should be about 8 yuan (online shopping).

Tear off the glue and lining, wash it with baking soda, and let it dry, but remember not to dry it! Then wipe the wooden handle with a damp cloth and let it dry! After playing, dry the racket and put it back in the racket bag! It would be better!

I bought back that layer is the inner glue, and there are also those that have to be sold, and the inner glue is also replaced, one seems to cost 25 yuan, tear off the inner glue, wash the wood of the handle, and then wrap the new inner glue, and then wrap the hand glue.

Use soap to make hand soap, be sure to wash it well, and let it dry after washing.

Steps for wrapping the badminton racket handle around the mold cavity moisture absorption strip:

1) There are two kinds of hand glue commonly used, one is adhesive hand glue with film, and the other is dry hand glue without film. If it is an adhesive hand glue, first remove the protective film on the surface of the hand glue, this side of the hand glue is wrapped on the outside and is in contact with the palm, and the other side is wrapped inside and is in contact with the handle.

2) Remove the double-sided tape on the tip of the hand glue, which is the place where the hand glue begins, and attach it to the end of the handle to fix it.

3) The right hand should be moderately tightened,—— it is important to pay attention to this, so that the rubber surface is slightly deformed, which can make the rubber surface more suitable for the handle and not easy to shift, while pulling with the right hand, press the rubber surface with the thumb of the left hand to prevent rebound, and slowly wrap the hand glue on the handle. Note that it is slightly deformed, not too much deformation!

4) Use scissors to cut a bevel mouth of the hand glue to facilitate sealing.

5) Start to seal, but at this time there is still something missing, and at this time another attachment of the hand glue begins to appear......It is a sealing strip, similar to an insulating tape.

6) The method of wrapping the sealing strip and the hand glue is similar to that of the socks, pressing on one side and starting to pull on the other side. The rubber surface after pulling off is very thin, and there is almost no unevenness when you touch it. You can also choose to use a sticky, thin insulating tape, because it is wider than the self-contained sealing glue, it is not easy to loosen, and it is very easy to use.

7) At this point, the great work of the royal code has been completed, and the hand glue will not have to be in the store in the future!

Winding moisture absorbent strips is an important preparation for badminton, and it will fall apart after a while, which will affect the feeling and comfort of playing. The correct way is:

1. Peel off the protective film on the surface of the hand glue, this side of the hand glue is wrapped on the outside, in contact with the palm, and the other side is wrapped in the imitation pin inside, and the handle is in contact.

2. Uncover the double-sided tape of the tip of the hand glue and prepare for the trip, this is the place where the hand glue begins, and fix it at the end of the handle.

3. Tighten the hand glue moderately to make the glue surface slightly deformed, which can make the glue surface more suitable for the handle and not easy to shift. At the same time, the thumb of the left hand presses the rubber surface to prevent rebound, and slowly wraps the hand glue on the handle.

4. Wrap the sealing strip, which is similar to the method of wrapping hand glue, press on one side, and start to pull on the other side. The rubber surface is very thin, and there is almost no concave and convex feeling when you touch it.

Usually it will have a raised line on both sides that are flat, flat and flat on top of each other.