What should I do if my ZTE phone can t connect to the network?

Hello, the mobile phone can not connect to the data network, it is recommended that you restart the mobile phone, if you still can not connect to the data network, it is recommended that you take out the mobile phone card and use the eraser to wipe the metal parts and then install it back, if you still can not connect to the data network, it is recommended that you go to the business hall to make up a new mobile phone card test, if you still can not connect to the network, then it may be a mobile phone problem, try to restore the mobile phone to factory value, if you still can not connect to the data network, it is recommended that you send the mobile phone for repair.

1. See if other people around you can access the internet.

2. Check whether the network connection of your phone is turned on.

3. Check whether the phone is in arrears and does not restart after that. Some mobile phones are in arrears before, and you can play ** but can't access the Internet after opening the payment, so please restart your phone and try it.

1. ZTE Mobile began to engage in the R&D and production of mobile phone products in 1998, and is one of the few high-tech enterprises in the world that has the ability to develop and manufacture a full range of 2G, 3G and 4G terminal products.

2. ZTE has R&D centers in Shenzhen, Nanjing, Shanghai, Xi'an and other important cities, and has independent software and hardware support platforms, industrial design platforms, R&D and testing platforms, etc. ZTE invests 10% of its revenue in R&D every year.

If the mobile phone cannot access the Internet normally, you can troubleshoot according to the following conditions:

Situation 1] The contact between the SIM card and the metal contacts of the mobile phone is insufficient, and the SIM card can be reinserted.

Situation 2] If the SIM card is damaged or there is a problem with the mobile phone, you can change the phone to test whether it is the SIM card or the mobile phone is faulty.

Situation 3] The current location is a signal blind zone or suddenly no signal, you can change places to test and pay attention to whether the mobile phone signal of other users around you is normal.

Situation 4] If the mobile phone card is in arrears or is shut down, you can pay off the arrears and turn it on.

Situation 5] The service is suspended due to abnormal use of the number, such as the number being used for illegal or illegal activities.

Situation 6] Roaming in Taiwan, Hong Kong, Macao or abroad can only be used after enabling Taiwan, Hong Kong and Macao roaming and international roaming.

Situation 7] If the total traffic generated by the Internet reaches the ** traffic cap value in the current month, the system will automatically turn off the Internet access function, or limit the speed of the network, and the network will be automatically restored in the next month, which shall be subject to your ** traffic cap rules.

The reasons and solutions for the wifi connection are as follows: Calling the stove.

The password is wrong and you can't connect, so you can't use it, just enter the correct password.

2.The phone's network settings are faulty. Restore the default network settings and then connect to the slag family.

The inability to access the Internet is caused by the wifi having no network signal or the network cable being unplugged. Just plug in the network cable.

4.If the hardware failure of the mobile phone causes you to be unable to access the Internet, you can go to the mobile phone store or after-sales inspection and repair.

Check and check if there is a problem with the wireless router settings.

Check whether your computer can access the Internet properly.

Then connect to other WiFi signals.

If it can be connected, rule out the problem of the phone itself.

If the phone has the problem of call disconnection, it is recommended to:

2.Check whether this situation occurs in every draft or defeat **, and rule out whether it is the other party**.

3.If the call is interrupted frequently, it is recommended to remove the SIM card and reinsert it.

4.Change to a different SIM card and see if the same problem occurs.

5.If it doesn't work, update the phone system version and try to shake the key: Settings - About Phone (About Device) - Manual Update Automatic Update (Software Update System Update - Update). Note: Please back up the data in your device before upgrading.

If the problem still exists, it is recommended that you bring the purchase invoice and the three-guarantee certificate to send the mobile phone to your nearest sales group service center for testing.

Connecting to a mobile network is as simple as turning on the 4G network in the settings.

The specific method is as follows:

1. Models of mobile and Unicom standards:

Go to Hand This Comma Settings --General --Mobile Networks--First Preferred Network Type.

Choose 4G, 3G, 2G, or 3G, 2G;

<>2. Models of telecommunication standards:

Go to Settings - General - Mobile Network - Turn on or off the Enable 4G but Data switch.

If you turn off 4G, the phone is using a 3G 2G network) <>

Summary. 2. Log in to the wireless router interface, the family is designed by the software of various brands to be more user-friendly, and it is easy to set up after entering, so set it up first.

WAN port, select PPPoE, enter and password and click Connect;

3. Finally, take a look at the connection status in the wireless router system information. If there is an IP, it means that the connection is normal;

4. If you don't want your broadband to be rubbed off the network, you can set the wireless security password on the wireless security settings interface, at present, the highest security level of the home 5, the router is WPA2-PSK, and the minimum is 8 numbers or letters (strictly case-sensitive).

After setting up the ZTE router, we must write down the password, if we forget the password afterwards, we can press and hold the front button of the router, restart the router, and then reset the password. Therefore, we don't have to worry about forgetting passwords. Of course, if the router has the problem of not being able to dial, we need to use the manual of the ZTE router, then use the default IP address to enter the ZTE configuration page, and then change the PPPoe dialing method to correct.

How to connect ZTE wireless routers.

1. Check the physical wire: first check whether the wire is connected, whether the corresponding light flashes normally, and if it is normal, proceed to the next step; 2. Log in to the wireless router interface, the family is designed by the software of various brands are more user-friendly, it is easy to set up after entering, first set up the WAN port, select PPPoe, enter and password and then point to connect; 3. Finally, take a look at the connection status in the wireless router system information. If there is an IP, it means that the connection is normal; 4. If you don't want your broadband to be rubbed off the network, you can set the wireless security password on the wireless security settings interface, at present, the highest security level of the home 5, the router is WPA2-PSK, and the minimum is 8 numbers or letters (strictly case-sensitive).

After setting up the ZTE router, we must write down the password, if we forget the password afterwards, we can press and hold the front button of the router, restart the router, and then reset the password. Therefore, we don't have to worry about forgetting passwords. Of course, if the router has the problem of not being able to dial, we need to use the manual of the ZTE router, then use the default IP address to enter the ZTE configuration page, and then change the PPPoe dialing method to correct.

Please give a thumbs up and five stars, thank you!

Dear users: Slow gear.

The reasons and solutions for the wifi connection are as follows;

The password is wrong and you can't connect, so you can't use it, just enter the correct password.

2.The network settings of the mobile phone are faulty [restore the default network settings, and then which circle is wider to connect].

If you are connected, you can't access the Internet, because there is no network signal on the wifi or the network cable is unplugged.

4.The hardware failure of the mobile phone should lead to the inability to access the Internet [go to the mobile phone store or after-sales inspection and maintenance].