How to wash lotus root slices, how to wash lotus root slices How to wash lotus root slices

There are many stains in the lotus root, how to clean it is the best.

<>1. If you want to clean the lotus root slices, you need to put the lotus root slices into the water to wash its outer skin, and then take out the lotus root slices and cut it into slices.

2. To clean the dirt inside the holes of the lotus root chips, you can prepare a cotton swab, and then use it to clean the holes of each lotus root piece. If you find this method troublesome, you can also soak the cut lotus root slices in water with salt and white vinegar.

3. After the lotus root slices are soaked in this water for about three minutes, we can take out the lotus root slices, and finally put the lotus root slices into the running water to rinse, so that the dirt in the holes can also be washed.

Peel the lotus root that has been sliced, soak it in clean water, and then use a toothpick to circle along the hole of the lotus root slices in the water, and the stain will be washed off. If the lotus root slice is thin, you can wash several adjacent pieces together, which is more convenient and faster.

1. Wash and peel.

2. Slice. <>

3. Use toothpicks and chopsticks to clean the hall.

Tips for cleaning lotus roots:

1.Cut off and peel the lotus root, put it in water, then wrap the gauze with chopsticks to scrub the lotus root holes, and finally rinse it with water.

2.Hard-to-wash residues in the holes can be removed with a goose feather insert brush.

3.Using a thin wire with cotton or gauze tied to one end, pass the untied end through the hole first, and then scrub it in water.

How to wash lotus root? 1. Water flushing method, soak the mud on the lotus root with clean water, this is because from the picking of the lotus root, transportation to the hands of users will pass a long time, so the mud on the lotus root will dry up on the lotus root, so before cleaning, you need to use water to soak the lotus root for a period of time, of course, before soaking in water, you must cut off the two ends of the lotus root, put the lotus root in the Shen Hall and soak it in the water for about two hours, and then pour out the dirty water, and then take a basin of water, re-clean the lotus root, until the mud is all washed off;

2. Soaking lotus root with warm water makes it easier to remove the mud on the lotus root, which is more convenient and time-saving, but it should be noted that the temperature of this water should be controlled at about 20 to 35 degrees, if it is too high, it is easy to destroy the nutrients of the lotus root.

4. After cutting into slices, the lotus root should also be washed with water, because if the two ends of the lotus root are not sealed, the mud will also enter the lotus, so when buying lotus root, you should pay attention to it, you should buy the two ends sealed, there is no mud inside, if you go into the mud, the flush is not clean, it is best to cut and wash it longitudinally, of course, it is best to have wet soil on the surface, which is untreated and more resistant to putting a little.

1. The lotus root is the stem of the lotus, which is section by section, because the lotus root grows under water, it can be said that it grows in the soil, and it is often dug out of the inside with mud, not only the outer skin has thin mud, but even the inner hole sometimes has dirty things, and it should be cleaned inside and out when washing.

2. After buying the lotus root, first disconnect it from the knots one by one, cut the knots and knots where they are connected, the fluffy things at the junction are not easy to clean, remove it, we cut the cross-section of the lotus, you can see that there are many holes in it, see if there is mud in these holes, whether it is black, and if there is one, it needs to be cleaned.

3. Rinse the lotus root with clean water to remove the two ends, when rinsing, if the things on the skin can not be washed off, you can wipe it with a steel wool ball, or scrub it with a brush, wash the skin clean, if it is a fresh lotus root, you can use a steel wool ball to rub it hard, you can rub off the skin of the lotus root, and then clean it several times, so that you will not bring the dirty things to the gap when cutting the lotus root.

4. If it is not fresh lotus root, then don't wipe the skin with a steel wool ball, we can wash the skin and peel it with a knife, there are sticky things in the lotus, and the hands will be very slippery when peeling, you must be careful, don't hurt your hands, you can also use tools to help the lotus root peel, and rinse it with water after peeling.

5. Put the peeled and cleaned lotus root on the board, which can be directly cut into round slices one by one, and you can also cut a knife vertically first, and then slice it, and the thickness should be thin and uniform when slicing, so that it is easy to cook together and avoid uneven raw and cooked lotus.

6. Put the cut lotus root slices into the basin, and then soak them in water, when soaking, put some salt in the water, soak them for about an hour and take them out, and if you see the black or dirty holes, you can use a small brush to focus on brushing, or wrap gauze with a chopstick and turn around in the gap repeatedly until the dirt is cleaned up.

7. The cleaned lotus root is rinsed several times in clean water, and the exceptions are clean, you can put it into the draining blue to drain the water, and then put it on a plate for later use, so that the lotus root will be thoroughly cleaned.