If the tire of the car is broken, how to change the spare tire?

The tires are the bottom of the car. The good condition of tires is related to the safety of driving. In daily driving, it is inevitable to encounter bad road conditions, such as air leaks, flat tires, punctures by foreign objects, etc.

In this case, you can't continue driving. You'll need to change the spare tire for an emergency need. Many people may have a long driving experience, but they haven't changed their spare tire yet.

How do I change a spare tire?

First, park your car safely. If you experience a flat tire on the road, there will be a potential safety hazard if you continue to drive. Therefore, you should park your car in a safe place, turn on your hazard warning flashers, tighten the handbrake, and place a triangular warning sign in the appropriate place behind your car.

In general, it is 100 meters behind the car on the highway and 150 meters behind the car on the highway. Increased distance is required when visibility is low at night or in bad weather.

Second, prepare the tools. In general, the spare tire is placed under the trunk, and some off-road SUVs are placed on the trunk door. Take out the spare tire, wrench, and jack with the car, check whether there is a problem with the spare tire, and prepare to replace the spare tire after confirming that it is in good condition.

Remove the tire. When removing tires, do not jack the car with a jack first. Using the friction of the ground, use a wrench to loosen the tire screws diagonally and counterclockwise.

If the screws are too tight, you can loosen them with your own weight. After loosening the screws, locate the girder in the chassis position and use the jack to jack up the side of the broken tire. Usually, there is a clamping slot on the chassis that corresponds to the jack.

Be careful not to lift the body too quickly with a jack to avoid danger due to unstable support. Support the body, with the tires about a finger off the ground, remove all screws, and place the removed wheels under the car for safety.

Finally, install the tire, take out the spare tire, align the screw holes, install the screws diagonally, then remove the damaged tire from under the car, retract the jack, place the tire on the ground, and finally tighten the screws to retract the damaged tire and warning triangle. After a tire burst or damage, do not continue to venture to the repair shop. Not only is there a safety hazard, but it can also accelerate air leakage and damage the entire tire.

When changing the spare tire, it is necessary to check whether the spare tire is normal. If there's a problem with the spare tire, you'd rather be rescued than risk it. At the same time, it should be noted that the spare tire is for emergency use and cannot be used for a long time.

After emergency use, it should be replaced with normal tires in time.

Stop the car first, then place warning signs in front of the car and behind the car, then loosen the screws of the tire with the hand plate, lift the body with a jack, then remove the tires, install the spare tire, screw the screws, take the jack away, put the car down, and then tighten the screws with a wrench.

Park the car in a safe place, take out the golden point, place it under the car, jack the car, then take out the spare tire, replace the spare tire, and immediately go to the nearby four S shop or regular auto repair shop to change the tire.

The car should be parked in a safe place, and then the tires should be removed, and then the spare tire should be checked for air leakage, and after the spare tire is replaced, it is necessary to see whether the parts of the spare tire are loose.

Car tires are broken, should first hang up the P gear, pull the handbrake, in the car 50 150 meters after the attack triangle warning sign, to warn other vehicles for the purpose of replacement, in the process of replacement should also be the car tire spare tire ready, take out the spare tire and spare tire change tools, the tire is disassembled, with a jack to find the apex, the tire is removed and then replaced with the spare tire. In the process of using the jack, it is best not to put the jack on the plastic shell, so as not to cause serious damage to the appearance of the vehicle. <>

Car tires need to be in direct contact with the ground, so we should pay more attention to the appearance of car tires, if there is serious wear and tear, it should be replaced as soon as possible, and it is inevitable that there will be a puncture in the process of driving the vehicle, so we should also pay attention to the service life of the tire, the service life of the spare tire is about 6 years, and it must be replaced in time beyond this period to avoid other problems. <>

What are some things to pay attention to when replacing the spare tire?

Park the vehicle in the emergency lane in time, set up a tripod skill 4 rows at 50 150 meters behind the car, and then use professional replacement tools to install the spare tire after the tire is removed. <>

How should tires be maintained during use?

In the process of driving the vehicle, we should pay more attention to controlling the driving speed, especially when driving on the highway, we should pay more attention to the speed, do not accelerate and brake sharply, so as to better protect the driving Anchang La, prolong the service life of the car tires, and strengthen the protection and cleaning in the process of driving the vehicle, check whether the tire pattern groove is covered by ice and snow, and clean up in time with a large number of stones and sediment, which can effectively extend the service life of the car tires.

After the car tires are broken, the problem that needs to be paid attention to is that the safety warning, first stop on the side of the road, and the car will take the warning sign and place it in front and rear of the body, and at the same time prepare a small Xiangfan round jack to fix the body, remove the blasted tire, and replace it with a new spare tire.

First of all, the tires that need to climb the slope need to be removed, and then the car is jacked up with a jack and transported early, and finally the spare tire and the screw hole are aligned for fixed installation; It should be noted that when dismantling the damaged tire, the screws do not need to be completely removed, and the screws can be loosened.

When driving on the road, after the car tire is broken, you should park the car in a particularly safe place in time, and then turn on the hidden danger warning flashing lights, tighten the handbrake, place the warning triangle at the appropriate position behind your car, prepare tools, and use the friction of the ground when disassembling the tires, and then use a wrench to loosen the screws of the tires in the counterclockwise direction, and remove the tires after using the Honghu jack to lift the car; It should be noted that when changing tires, it must be a particularly safe environment, and the hazard warning flashing lights must be turned on, and the handbrake must be tightened.

When replacing the spare tire, you must check whether the spare tire is normal, loosen the screws of the broken tire with a tire wrench, and then remove the tire screws with a wrench, you can take the tire down, take out the spare tire, and install the spare tire on the tire screw hole. When replacing the spare tire, be sure to check whether the spare tire is normal.

The tire is the foot of the car, and the good condition of the tire is related to the safety of the car. In daily driving, it is inevitable to encounter bad road conditions, sometimes there will be air leakage, puncture of tires, foreign body punctures, etc., in this case can not continue to drive, need to replace the spare tire to solve the urgent need, many people may be driving for a long time, but have not changed the spare tire, today you will be asked how to replace the spare tire.

1. If you encounter a flat tire on the road of safe parking, there will be potential safety hazards if you continue to drive, so you should park the car in a safe place, turn on the hazard warning flashing lights, tighten the handbrake, and place a warning triangle at the appropriate position behind the car (100 meters behind the car on the general road, 150 meters behind the highway car, and when the visibility is low at night or in bad weather, the distance needs to be increased).

2. The preparation tool is generally the spare tire at the bottom of the trunk next to the rear god, and there are also some off-road SUVs placed on the trunk door, take out the spare tire and the wrench and jack with the car, check whether there is any problem with the spare tire, and prepare to replace the spare tire after confirming that it is in good condition.

3. Disassemble the tire 1 When disassembling the tire, do not use the jack to lift the car up, use the friction of the ground, use the wrench in a diagonal way in the counterclockwise direction, loosen the tire screws, if the screws are too tight, you can use your own weight to loosen the screws.

2. After the screw is loosened, find the girder at the chassis position, and use the jack to jack up the broken tire side, and generally there is a card slot corresponding to the jack on the chassis. Be careful not to use the jack to lift the body too fast, so as not to cause danger due to unstable support.

3. Hold up the body, the tires are about a finger away from the ground, remove all the screws, and put the removed wheels under the car in order to safely lift the beam.

4. Take out the spare tire with the installation of the tire, align the position of the screw mouth, put the screws on according to the diagonal method, and then take out the damaged tire under the car, retract the jack, put the tire on the ground, and finally tighten the screw, and retract the damaged tire and the warning triangle.

After a puncture or breakage of a tire, you must not continue to venture to the repair shop, which is not only a safety hazard, but also damages the entire tire as the air leak accelerates. When replacing the spare tire, be sure to check whether the spare tire is normal, if there is a problem with the spare tire, it is better to be rescued than to take the risk, and at the same time, it should be noted that the spare tire is for emergency use, and the tire can not be used for a long time, and it should be replaced with a normal tire in time after emergency use.

Start by jacking the vehicle up. Loosen the tire screws when the tires are not off the ground, and then lift the wheels of the vehicle completely. Remove the tire and replace the spare tire. But remember not to go too fast, or it will be dangerous.

In the case of a sudden tire puncture while driving on the road, put the car in P gear, pull the handbrake, and put a warning triangle between 50 meters and 100 meters behind the car to warn other vehicles. Then go and get the spare tire replacement tools and spare tire ready. Some cars have a spare tire in the back of the car, but more often than not, under the bezel in the trunk of the car.

Open the partition and you can see the spare tire, as well as the replacement tool.

1. Tools for taking out the trunk, including: wire hook and loop (for pulling out the bolt cover), jack, wheel wrench.

2. Put the wrench on the bolt, turn it to the left, and press it with your foot if necessary.

3. Find the support point of the car jack (located in the position of the girder inside the concave point at the bottom of the vehicle), adjust and shake the car jack until the car wheels just leave the ground. At the same time, place the spare tire on the left side of the jack at the bottom of the vehicle (to prevent accidents and damage to the vehicle).

4. Completely screw out the bolts one by one, remove the wheel, replace the spare tire, and tighten all the wheel bolts (no need to tighten). Place the replaced wheels on the left side of the jack (to prevent accidents and damage to the vehicle).

5. Rotate the car jack to put down the car and tighten the wheel bolts with a wheel wrench. Do not tighten the bolts sequentially, but in a diagonal pattern alternately and step by step, placing the jack and the replaced wheels into the trunk.

1.If you are changing a tire on the side of the road, be sure to use the vehicle's tripod to place it 150 meters behind the car. Warn the oncoming car behind to ensure your own safety.

2.Spare tires are not full-size compared to original tires, so we should go to the repair shop in time to repair the tires and replace them with the original tires after replacing the spare tires. The spare tire should not be used for a long time and can only be used as a temporary backup.

It is best not to exceed the speed of 50 yards during the driving of the spare tire.

3.The tire set screws have been removed, but it may be difficult for the tires to be removed because of the heavy dead weight of some tires. At this time, you might as well be bold and kick the tire, and it will come down automatically.

Although the replacement of vehicle tires is relatively rare in daily life, it is not afraid of 10,000 in case, if you go out or outdoors, once a tire failure occurs, it can be much more convenient to do it yourself. Waiting for help is not only time-consuming but also costly. Secondly, in the daily maintenance process, we must regularly check the tires in the trunk, and open the trunk spare tire compartment before traveling to check whether the spare tire is normal and whether the replacement tools are complete.

Quick and easy way to change the spare tire Can't remember** at the end.

Two days ago, the tire broke a hole and repaired the tire, I don't know if I need to change the tire, and then I want to change the tire to ** change, do you have to go to the 4S store? Two days ago, the tire broke a hole and repaired the tire, I don't know if I need to change the tire, and then I want to change the tire to ** change, do you have to go to the 4S store? Most of the tires on the market can be replaced based on the following points:

Point 1: If the tire is aging (for example, there are countless small cracks in the tread groove or sidewall that are about to hurt the carcass), the tire needs to be replaced in time, regardless of how long the tire has been used and how much it has been worn.

The second point: if the depth of the groove left in the tire pattern is at or below millimeters (there is an indicator mark indicating this depth in the groove of the longitudinal straight bar of the tire tread), the tire must be replaced, because the drainage capacity of the tire has been greatly reduced, and the vehicle will be more dangerous to drive in wetlands. In addition, it is especially important to note that bulging tires should not be used any longer.

Whether you need to replace tires is recommended to refer to the above, the general use of tires is about 4-60,000 kilometers, and the time is 3-5 years. Because the use of tires is affected by driving habits and road conditions, it may also be different from mileage or time, so it is not recommended to judge simply from mileage or time. If the tires of a new car are punctured, it is not necessary to change the tires, and it is not difficult to repair the tires.

1. The so-called cold repair is to remove the injured tire, find the wound, clean the foreign body at the wound, and paste a special tire repair rubber from the inner layer of the tire to complete the leakage. In fact, this method is similar to the tire repair method of bicycles, but it requires a special tire scraper and tire repair rubber to complete. It has the advantage that it can repair larger wounds, but the disadvantage is that it is not durable enough.

2. Hot supplement, also known as fire supplement, is a more thorough tire repair measure. For heat repair, the tire is also removed, and then a special raw film is attached to the wound. The wound is then baked with a roaster until the raw film fits perfectly to the tire.

The advantage of thermal repair is that it is very durable, and there is basically no need to worry about repeated air leaks at the wound. However, it also has the disadvantage that the technical requirements during construction are high and the time required is long. 3. Rubber strip method rubber strip method tire repair is the folk cow repair method, which is the simplest and most practical method, with low requirements for equipment (a set of tire repair tools plus a small tire inflator pump), and the professional and technical requirements for the owner are not high, so it is very suitable for ordinary car owners, but the safety is also relatively reduced.