How to set up and use the telecom belt road tour cat ZTE 831 Tietong

1.Connect the network cable to the [Internet] interface, turn on the 831CII power supply, wait for the WLAN light to turn on to indicate that the device is completely ready, enter login in the IE address bar, the account is the password is admin by default, and enter the 831CII web management interface.... 2.Go to [Advanced Settings] Port Mapping and remove the check box in front of the [Enable Virtual Ports In] option 4

Go to [Advanced Settings] Wide Area Network], 4Click "New" to re-establish, fill in 0 33 (this is the value here in Huangdao, you can also try 0 32, 0 35, anyway, just a few values), click Next 5In WAN Connection Mode, select PPP over Ethernet (PPPoE) and click Next 6

Select Automatically Get WAN IP Address, then tick the Enable Network Address Translation (NAT) option, and click Step 7Fill in the username and password [Forever**] - tick and then next, confirm and press"Done"Complete the setup Observe the router panel indicator to see the complete activation process 10Since the DHCP server is set up to automatically assign an IP address, (1) Restore the IP settings of the computer to automatically assign an IP address.

Or (2) reserve the IP address and point the gateway to an address like 831cii so that multiple computers can share the Internet.

Dear users, hello; Thank you for your support of Telecom. First use the computer to connect the router separately, after entering the negative setting, modify the address in the LAN port settings, save and restart, and then insert the cat's network cable into the WAN port of the router, and then use it to enter your own router to set up. If it is a wireless modem, then find the root network cable, connect it to your wireless router alone, and then enter to modify the LAN port IP.

In fact, it is to modify your router IP to avoid conflicts with optical modems. After the modification is completed, save and restart. Then connect the network cable from the optical modem to the WAN port of the router, and then enter the new address of the router to set it.

Everything else is set up just like a normal router.

If you need to buy a mobile phone, check the bill, and pay the phone bill, please log in to the online business hall of Anhui Telecom, and wish you a happy life!

Hope mine is helpful to you.

There are cats and routers, Tietong network set wireless routing method:

Home Network Environment Cabling]:

1. There is a cat (modem): cat (modem) - router WAN port; The LAN port of the router --- a computer.

2. No modem: network cable --- router WAN port; The LAN port of the router --- a computer.

Computer enters the router]:

1. The computer IP and DNS settings are automatically obtained.

2. Open the browser, enter the general router address in the address bar is this or check the login information on the back of the router) Enter the route - enter the user name and password, (the default is generally admin).

Set Router Dialing]:

1. In the [Setup Wizard], select [PPPoe Dialing] (some are ADSL Dialing), enter the Internet user name and password according to the prompts, and save.

2. In [Network Parameters] --WAN Settings], select [Normal Mode], and select [PPPoe Dialing] in the three options of [Connection]. The next step is to select [Auto Connect], Save, and Exit.

Turn on the router's wireless function].

1. Select Wireless Settings --- Basic Settings.

2. Check [Turn on wireless function] and click Save.

Turn on the router's wireless function].

1. Select Wireless Settings --- Basic Settings.

2. Check [Turn on wireless function] and click Save.

Set wifi password].

1. Wireless Settings - Wireless Security Settings - Select [WPA-PSK WPA2-PSK].

Authentication Type: Automatic.

Encryption algorithm: AES.

The PSK password is the wireless password. Set the required password.

First, use the cat to access the network cable, and then transfer the network cable from the cat to the unlimited router, and then set up something like DHCP on the infinite router, and then the wireless route will automatically convert the wired signal into a wireless signal. Remember it has to be a wireless router! The wireless signal is basically not received if it exceeds 50 meters, and the weakening of the wireless signal by metal objects and cement walls is also very strong, remember to arrange it in a suitable position.

The wall line is connected to the cat, the cat is connected to the router, and the route is connected to the computer, which is the wired network; The wireless network should be set up on the computer; On the back of the router there will be a routing home page, or, and then there will be settings inside, mainly depending on what brand of routing you have.

1) Equipment installation.

Plug in the power cord of the wireless broadband router, and the power indicator and WAN port light on the wireless broadband router will light up normally. Plug one end of the network cable into the LAN port of the router and the other end into the network cable interface of the computer. Then use a network cable to connect the broadband modem to the "WAN" port of the router.

2) Configure the router.

The address of different routers may be different, but it is generally written at the bottom of the router and on the router manual. After logging in to the router, there is generally a connection wizard, according to the connection wizard, at this time you will be asked how to surf the Internet, the family is generally adsl virtual dial-up (that is, PPPoe), select this, and then fill in the account and password, step by step to do it. In the wireless connection management, you can set the name, password, channel and other information of the wireless network.

Have a great day!

Equipped with broadband, Internet room! Guangdong Telecom's online business hall is equipped with telecom broadband, faster, easier and more economical! 4M pure telecom broadband, no fixed line and mobile phone, one household and one line, no peak pressure on network speed, please click for details.

You can use your own wireless router for this, otherwise connect the two routers and only turn on the wireless function.

The steps are as follows:

1. First turn on the power of the wireless router, connect the "cat" to the WAN port of the router, and then plug a network cable into any LAN port of the wireless router, and connect the other end to the computer. Then, open the browser, enter in the address bar, and the following login interface will appear:

2. Enter the initial password admin, click OK, and enter the main interface below after logging in successfully

3. In the figure above, enter the account and password assigned by Tietong, set the wireless password at the same time, click OK, the router will automatically restart, and wait.

Here's how to set up your router:

1. Line connection:

a.Connect the network cable from the cat to the router (WAN port), and then connect the network cable connected to the computer to the router (any port numbered 1, 2, 3, 4).

2. Log in to the router interface.

In the browser, type: Enter, enter in the pop-up page: admin and click "OK".

3. If you need to click on the broadband connection to access the Internet (when you don't connect the router), you can only access the Internet after successful dialing, you should choose the Internet access method, and enter the broadband account and password correctly for the Internet account and Internet password.

**The following is how to set it up

Connect the router to the cat and use the IE login account and password to admin by default, and then use the setup wizard to set up the router.

Isn't it written in the manual?

Everything is connected according to the normal method, and then log in to the routing homepage, fill in the default password, etc., change all passwords, OK

After the Telecom Fiber Modem + Wireless Router cannot log in to the routing setting method.

1. First of all, change the wireless router IP: connect your computer with TP-wireless router separately, do not connect the optical modem, so that you can enter the TP settings page, change the router LAN port address in the network settings - LAN port settings to, save, DLINK router is written behind the router Yes, this is no conflict with the default telecom fiber optic modem, you don't need to modify the IP.

2. To the network connection, cancel the "broadband connection" as the default connection; Click Local Join, Right-click, Properties, Select: Automatically get IP address, DNS server, OK; In IE, enter :, account number:

admin password: admin Log in to the router to set up: click the setup wizard, enter the widenet account and password, and select the mode:

pppoe。Save to exit.

3. Connect the network cable connected by the optical modem to the WAN port of the router, and continue to set the wireless routing on the TP-Settings page.

4. Fiber Optics Cat Telecom has been set up, and it should not be changed if it can access the Internet;

Now the main thing is to set up a wireless router:

1. Basic settings of wireless network: 1. Turn on the wireless function; 2. Turn on SSID broadcasting. Wireless Network Security Settings:

Turn on the security settings and use the WPA-PSK WPA2-PSK AES encryption method. 1. Select: WPA-PSK WPA2-PSK; Type of Certification:

Automatic; Encryption algorithm: AES. Settings: psk password:

Add it yourself;

2. Network parameters: 1. WAN port setting: WAN port connection type: PPPoE; 2. Second connection: disabled; 3. Corresponding connection mode: automatic connection;

3. DHCP server: enabled; Save, restart. It should be possible to access the Internet on computers and wifi.

If the problem is solved, please adopt it in time, thank you!