How long does it take for the Redmi phone to flash and appear

Generally speaking, it is normal to brush the machine for 5-10 minutes. If you haven't finished brushing for 30 minutes and the progress bar doesn't move, it is likely that the flashing failed, and you can break the data cable and re-flash it. However, there is a problem with the flashing time being too short, for example, just connecting to the mobile phone prompts the brushing is finished, this situation is generally a problem with the flashing package, in fact, there is no start to the process of flashing, in this case, it is recommended that you ** brush the treasure on the brush package, and at the time of **, you must confirm that the model of the flashing package and the mobile phone is exactly the same, otherwise the flashing fails, and the mobile phone becomes bricked and embarrassed.

Summary. After this appears in the flashing of the Redmi phone, what should I do next, manually flash the phone.

Power off first, the volume button plus the volume key plus the power button.

So what to do.

Enter the MIUI official website, click on the "**" to enter the ** interface, select the "mobile phone brand and type training bend", and then enter the "MIUI ROM** installation package" interface. As shown in the figure below:

If the computer does not have a "flash tool", please click **"General Flash Tool" and install, the icon of the brush machine stove Qi Hand is hidden with a yellow round background white font mi, as shown in the following figure:

Seeing the last one** means that the flashing is successful.

Hope it helps.

About 1 minute.

Flashing preconditions.

2: The mobile phone has sufficient power, and it is recommended that more than 50% of the battery remains.

Ensure that the internal storage of the hand-ling disassembly or the external SD card of the mobile phone has at least 100M or more remaining capacity than the ROM package.

Step Method. 1.Connect your phone to the flashing master.

3.Perform rooting

6.One-click flashing.

Prepare the ROM,Start flashing with one click,Before flashing starts, the flashing master will check the phone and the flashing package,Click "Browse" to select the best ROM just now,Don't forget to follow the prompts to back up your contacts、SMS and applications。

After entering the "one-key flash" mode, the device will enter the automatic flashing mode, and after about 5-15 minutes, you can complete the one-key flashing, please be patient.

Wait patiently for a few minutes and the flashing will be done automatically.

1. It may be that the system is stuck. Restarting your phone will solve the problem.

2. Whether it can enter recovery. How to enter recovery: In the shutdown state, first press and hold the "volume up button" and then press and hold the "shutdown button", and let go when the boot screen appears, you can enter recovery.

If you can enter recovery, please switch the system under recovery and back up the data, if it can't be successful, you need to erase all the data (contacts, text messages, phone apps, etc. will disappear).

3. There is a problem with the mobile phone system and cannot be recognized. Whether it can enter fastboot. Ways to get into fastboot:

In the shutdown state, first press and hold the "Volume Down Button" and then press and hold the "Power Off Button", and let go when the boot screen appears, then you can enter fastboot. Please connect your mobile phone to the computer and flash a complete system package with the method of miflash.

4. Mobile phone hardware problems. At this time, the only way to take the phone to the repair office for maintenance is to do so.

1. Restart the battery!

2. If the built-in battery is pressed and held on to the power supply, it will automatically restart after 10 seconds!

3. The above are not easy to make, enter the rabbit mode and re-flash the machine!

Causes of Redmi Flashing Failure:

1. Xiaomi. Redmi's version of Recovery is not right.

Some friends use official recovery to flash third-party ROMs, but they can't be flashed. In addition, older versions of Recovery are not compatible with some new flashing scripts, which will cause the flashing to be unable to be executed, so we recommend using CWM-based Recovery.

2. Xiaomi. There is a problem with Redmi's rom flashing package.

3. Xiaomi. Redmi is running out of battery.

When the flashing process cannot be executed due to insufficient power, or the mobile phone will automatically power off and shut down during the flashing process due to insufficient power.

4. Xiaomi. There is a problem with Redmi's SD card.

Some SD cards have problems that prevent the flashing package from being read correctly when flashing.

5. Xiaomi. Redmi's kernel is incorrect.

Our mobile phone system has a kernel, which is the core of the entire system support, if you flash into the corresponding system, the system will not be able to start. For example, Android

The kernel and the flashed ROM may cause the system to fail to boot properly.

6. The flashing operation is incorrect.

If you make a mistake in the flashing process, such as not having double clearing, etc., you must clear the data in the original phone before flashing into the ROM, otherwise the system will be stuck on the boot screen after flashing.

There are two ways to update the system of Xiaomi mobile phones, one is called OTA, automatic upgrade mode. That is, after clicking, the background will be automatic**, automatically decompressed, and automatically updated, and the phone may restart once or several times during the process. One is called flashing, which is divided into line brush and card brush, both of which must be the corresponding line brush bag and card brush bag.

However, the line brush is to use the computer to connect the mobile phone to flash, and the card brush is to put the bag into the mobile phone memory card to flash.

The Xiaomi mobile phone system is divided into two categories: one is called the stable version, and the other is called the development version. The stable version is updated from time to time; The development version is often updated once a week, and it will be made into a stable version only after the functional tests are stable. In other words, the development version is potentially unstable.

The next step is the difference between flashing:

1. The stable version and the development version are interchanged, and the machine must be flashed;

2. The stable version can be upgraded to OTA, and there is no need to flash the machine;

3. The development version can be upgraded to OTA, and there is no need to flash the machine;

4. The development version and the stable version must be flashed;

5. Major revisions, development versions, and stable versions may require flashing. For example, recently, the Xiaomi system will unify the management of card storage and machine storage, that is, it no longer distinguishes between mobile phone storage 2G and card storage 16G, and becomes 18G (the above data is just for example, Xiaomi mobile phone storage has 1G, 2G, 3G, etc., and card storage depends on the capacity you purchased, there are 8G, 16G, 32G, 64G, etc.). This package is currently only available in the development version.

Back to your specific requirements, Redmi, as long as it does not cross the stable version and the development version, only OTA is needed, and there is no need to flash the phone.