How to use the printer

After the driver is safe, it is time to add the printer

Right-click on my computer, Explorer, Control Panel, Printers & Fax, right-click on an empty space, Add Printer, Next, Local Printer, and find yours on the line.

Are you sure it's a test page, if it's all, turn off the printer, turn off the computer, unplug the cable from the printer and the computer, turn on the computer, connect the cable, turn on the printer, and try to print other documents. Note: Set the current printer to the default.

Generally speaking, install the printer's driver first, that is, buy the disc that the printer is bringing, and then connect the printer in the state of shutdown, and the printer should be automatically recognized after starting the computer, and it can be used, generally in word

It is best to do a print test and calibration when you use it for the first time, if it is hp, it is explained in the help system. You can refer to it.

Printer. 01 Startup:

Turn on the computer first, and then turn on the printer when it is turned on, so that the printer will not be turned on twice.

02 Putting paper:

The paper should be tightened in the carton to be moderate and put neatly, otherwise the paper will be jammed.

Paper jam: If the printer is jammed, turn off the power first, and then open the chassis so that the machine will not be damaged.

Buying paper: Buy better paper, if you buy a laser printer, don't use paper under 70g. Paper with a rough surface cannot be used, otherwise the machine will burn out.

03 Print Quality Settings:

Virus: It may prevent the printed document from starting, so turn off the printer and start it again after a while, or restart the computer.

04 Consumables:

After all, you get what you pay for.

The details of how to use the printer are as follows:Tools Raw materials: ThinkPad L470, Win10 system, Word2010.

1. If you want to use a printer to print, we first double-click a document on the computer desktop.

2. Then we will open this document first.

3. After that, we click [File] in the upper left corner.

4. Then click [Print].

5. After the manuscript slag is cracked, Liang Sen hits the drop-down arrow behind the printer.

6. Select the connected printer.

7. Finally, we click the button to close the print and print.

1. Before use, check whether the switch of the printer is turned on, whether the paper is enough, and whether the ink in the cartridge is still there.

2. When the new printer is connected to the computer, there will be a new hardware prompt, the general printer comes with a driver, it will be installed automatically, after the installation is completed, you can add the printer in the control panel, the printing test will be displayed, you can try to print a copy to see if the printer is normal.

3. When everything is ready, open the file ready to be printed, click on the print preview to see if the layout is suitable, if there is no problem, click on print, select the page range and the number of copies, and press OK to print it out.

The document can be printed directly without previewing, but **To click print on the preview dry skin interface, select the one you want to print**, tick it, and then select the layout, that is, print a few on a piece of paper**, and finally click to print.

If the file is not printed, first check whether there are too many printing tasks in the lower right corner, you can delete the file that has no defeat or printing failure, and if you encounter a problem that is not easy to solve, you can try to restart the printer.