-
Anonymous users2024-02-07The cartridge is broken, just buy it from me and take it back and replace it.
-
Anonymous users2024-02-06Hello, I am glad to serve you and give you the following answers: If your Canon IP100 printer ink cart will not move, you can try the following solutions:1
Check if the ink cart is installed correctly: Make sure that the ink cart is installed in the correct position and has not been damaged by external forces. 2.
Check the ink cart for air bubbles: If the ink cart is not in the state and has air bubbles inside, you can try wiping the ink cart with a damp cloth to remove the air bubbles. 3.
Check the ink cart for damage: If the ink cart is damaged, you can try to replace it with a new one to make sure the printer is working properly. 4.
Check the printer driver: If the printer driver isn't installed correctly, you can try reinstalling the driver to make sure the printer is working properly. Personal Tips:
When using the printer, you should regularly check whether the ink cart is installed correctly and whether there are air bubbles or damage to ensure that the printer is working properly.
-
Anonymous users2024-02-05Hello, I am glad to serve you and give you the following answers: If your Canon IP100 printer ink cart will not move, you can try the following solutions:1
Check if the ink truck is installed correctly: make sure that the ink car is installed in the correct position and has not been damaged by external forces. 2.
Check if there are air bubbles in the ink cart: If there are air bubbles in the ink cart, you can try pressing the ink cart with a blind and sharp object to release the air bubbles. 3.
Check the ink cart for damage: If the ink cart is damaged, you can try to replace it with a new one. 4.
Check if the printer is faulty: If the printer is faulty, you can try restarting the printer, or check that the printer's power cord is in good contact. Personal Tips:
When using the printer, you should regularly check whether the ink cart is installed correctly and whether there are air bubbles or damage in the ink cart to avoid affecting the printing quality.
-
Anonymous users2024-02-04The problem with the trolley is that it can move the cart that can put cartridges, and it can be replaced with a new one.
-
Anonymous users2024-02-03There is a problem with the cleaning system. Take it to the repair point and let him help you clean it up. I can't do it myself.
-
Anonymous users2024-02-02Yes, this problem comes up a lot on this machine, it's a very common problem.
This is a timeout error of the ink car, and this error will be prompted if the ink car is stuck or the ink car is not reset in time.
Solution: Take out the ink cartridge and reinstall it, and then restart the computer and printer. If this fault often occurs, and it is a continuous supply, then please check whether the ink supply cable is not good and affects the movement of the ink car, and you can add some lubricating oil to the trolley slide rod appropriately.
If it still can't be solved according to the above methods, please try to reset the ink cart manually: 1, open the cover 2, push the ink cartridge to the right with your hand 3, close the cover 4, turn off the power 5, turn on the power 6, open the cover 7, see if the ink cartridge automatically slides to the right 8, and use the hand to help the right side again when the ink cartridge slides 9, and close the cover when the ink cartridge has reached the end of the line.
If it doesn't work, find a professional to fix it.
-
Anonymous users2024-02-01Problems with cartridge trolleys. Is it the installation of continuous supply that causes the car to move poorly?
-
Anonymous users2024-01-31Error code B504 means that the printer is full of waste of ink, please deal with it in time.
Solution: 1. First press the "Stop Reset" button with your finger, and then press the "Power Switch" button to start the machine rock eliminator hole.
2. When we see the power indicator is green, please release the "Stop Reset" button.
3. Press the "Stop Reset" button five times with your finger, and release the "Power Switch" button and the "Stop Reset" button.
4. When you see a bright green light, the printer is in a repaired state.
5. Press the reset button on the paper again, and the printer will print out a piece of paper. When the operation is complete, power off the printer and then reset.
-
Anonymous users2024-01-30First of all, look at the data cable and other lines are enough to connect well If you don't understand, you can change the socket 2, see if it is a driver problem It is recommended to replay the driver with the original CD to drive 3, whether the paper is jammed The ink cartridge is stuck, etc.
The above are just regular questions.
If it's true that the waste cartridge is full.
You may have modified the continuous ink supply system and clogged up! You can press it with a needle in the cartridge! Let's see if we can get through.
If not modded! You'll have to dismantle the printhead a few times! If it really doesn't work, just change it!
-
Anonymous users2024-01-29Use the machine's dedicated cleaning counter software to empty the waste ink counter.
-
Anonymous users2024-01-28Take out the ink cartridge, then take out the print head, soak the ink side in warm water, don't wet the circuit board, just soak the hard ink.
IP1180 ink cartridges are 830 (black), 831 (color) or 40 (black), 41 (color) If you want to print color, you need to install color cartridges; Of course, at this time, try to install black ink cartridges, because after all, there are still many places where black is used, although IP1180 supports single ink cartridge printing, if you want to connect externally, it is also possible. IP1180 is used in four colors, of which the red, blue and yellow colors are connected to the color cartridge, and the black is naturally connected to the black cartridge. The changes to the supply should pay attention to: >>>More
Play a few more cards after the bet and try again later. Every time you add ink, add less, add a few more times don't be afraid of trouble, it's really not good to change the cartridge again, use up and then fill the ink, drill a small hole on the line, be sure not to add too much ink!
1. The printer lights up yellow.
It may be the reason that there is no ink, because the printer can only identify the capacity of the original ink, if this is the case, the printed font color may be relatively light, and adding some ink can solve it. >>>More
Purely from the perspective of sunrise photography:
Aperture priority and shutter priority will have different effects, but according to a certain amount of **, the shutter and aperture jointly determine this, so it is a trade-off relationship. You can use anything, the point is not here. >>>More
I hesitated for days between the LX3, the P6000 and the G10 before finally making the choice, the G10. When the new machine arrived, the heavy feeling made me completely relieved and felt that I had made the wrong choice. Thinking back to the first time I saw G9's **, it made my eyes light up, and I felt that Xiao DC could produce such a **, what more could I ask for? >>>More