Why don t you apply a little toner at night?

Updated on Car 2024-04-16
30 answers
  1. Anonymous users2024-02-07

    You can rub a little toner before using the jelly film at night, and use toner before applying **. This is because the toner has a secondary cleansing effect, and the pores on the face can be opened with toner before applying, and it can quickly replenish moisture so that the skin can better absorb and prepare for the use of skin care products. Therefore, you need to use a toner before applying **.

    Proper use of jelly film:

    1.After cleansing, pat on an appropriate amount of toner, then apply an appropriate amount evenly to the entire face, completely isolating the skin from the air.

    2.After applying it for 15-20 minutes, gently massage it for 1 minute to secrete the effective ingredients in **, and then rinse off with water (it is not recommended to use facial cleanser, and then you can carry out daily skin care.)

    3.It is recommended to use at least 2-3 times a week for best results.

    4.It can also be used as an eye mask, lip mask, and hand mask. When using as an eye mask, be careful not to get the essence into your eyes, and gently wipe it off with a soft cotton pad without massaging after application.

    5.Suitable for all skin types, especially for dryness, aging, wrinkles, bags and dark circles.

    of persons.

  2. Anonymous users2024-02-06

    To use, but before, whether it was a frozen film or a sleep**, it was essentially a kind of night cream, but this kind of one has a little gel ingredient, and the steps to use the night cream are "cleansing - toner - skin primer (if any) - essence (water-like essence, essence, essence) - night cream", there is really no "cleansing - toner - night cream", the role of toner is to balance the pH value of the face after cleansing, hydration, and prepare for subsequent skin care. After using the toner, take an appropriate amount of jelly film on the forehead, cheeks, nose tip, and chin on the face (if necessary, add some to other parts), massage until absorbed, and wash it off with washing your face the next morning.

  3. Anonymous users2024-02-05

    Use toner first, moisturize ** first, and then use a jelly film, because if you don't wash your face at night, you have to wait until the next morning, otherwise not only can you not moisturize, but also take away the moisture in your **.

  4. Anonymous users2024-02-04

    Wipe it or not.

    It's more moisturizing, but if you don't want to add to the burden at night, you can also just use a jelly film.

  5. Anonymous users2024-02-03

    Yes, the toner has a cleansing effect, which can open the pores, and it can be better absorbed with **, I hope it will help you. In addition, remind you that if it is dry**, the application time** can be slightly longer, not more than twenty-five minutes, and if it is oily**, it is recommended not to exceed fifteen minutes.

  6. Anonymous users2024-02-02

    The purpose of the toner is to re-cleanse to restore the pH level of the skin's surface, and to condition the stratum corneum, so that the skin can absorb better and prepare for the use of skincare products. Therefore, after washing your face, use a toner to quickly replenish moisture. Experts recommend firming lotion for oily products, toner for health, toner for dry, toner for dry, toner for mixing**T-zone, and sensitive water for sensitives.

    Therefore, using a toner can be better absorbed for subsequent skin care products.

  7. Anonymous users2024-02-01

    Of course, you have to use it, rubbing toner before making a frozen film can open the skin channel for better absorption, and rubbing it with a cotton pad can also play a role in a secondary cleansing, I hope it will be useful to you!

  8. Anonymous users2024-01-31

    Replenish the toner before using ** to lock in the water molecules, which is more conducive to better absorption.

  9. Anonymous users2024-01-30

    If you don't stay overnight, if you feel dry, you can apply some toner.

    If you leave it overnight, use it as the last step of your skincare and just apply a thin layer.

  10. Anonymous users2024-01-29

    You can wipe it or apply it directly.

  11. Anonymous users2024-01-28

    After using **, you can use toner after washing your face for a while.

  12. Anonymous users2024-01-27

    If there are no grease particles on the face, you can use it. If you have one, don't use it.

  13. Anonymous users2024-01-26

    It is recommended to open the pores first.

  14. Anonymous users2024-01-25

    No, what jelly film do you use?

  15. Anonymous users2024-01-24

    I usually rub a little bit.

  16. Anonymous users2024-01-23

    Sleep**? Are you going to wipe it overnight?

  17. Anonymous users2024-01-22

    Before you do a deep cleansing, before you dried, you should spray some moisturizing spray for subsequent absorption, and after applying, see if you want to clean, and massage it on the face without washing! If you want to clean, you should apply a nutritional moisturizer.

  18. Anonymous users2024-01-21

    Before applying**, you should clean it first, and then apply it directly, the jelly film is different from the general**, and there is also the effect of skin care products. After application, you can wash off or massage until absorbed

  19. Anonymous users2024-01-20

    Apply it directly, then wash it off, of course, if you feel that ** is too dry, you can first apply a primer moisturizer, and then wipe the jelly film for a better effect.

  20. Anonymous users2024-01-19

    Wash off with a cleanser or cleanser and no other skincare products.

  21. Anonymous users2024-01-18

    It is necessary to do a basic cleaning before using the jelly film.

  22. Anonymous users2024-01-17

    You can apply some water and essence for better results.

  23. Anonymous users2024-01-16

    There is no need to apply skin care products before the frozen film, in order to make the frozen film better absorbed.

    Because the pores are still in a dilated state after washing the face, it is most appropriate to use a jelly film at this time.

    And your skincare products work to reduce the appearance of pores and lock in moisture.

    It is to close the pores, which will hinder the absorption of the frozen film.

    However, you can use some base products, such as base essences and the like, which are used to cleanse the second time, and also have some effects that promote absorption, which can make ** better absorption.

    After using **, do basic maintenance.

  24. Anonymous users2024-01-15

    After washing your face, you can apply it directly.

  25. Anonymous users2024-01-14

    It is best to use it after washing your face, this way, the pores are wide, and it will absorb well.

  26. Anonymous users2024-01-13

    Just apply it directly, it's very simple.

  27. Anonymous users2024-01-12

    Don't use it like this **It will not be absorbed It is recommended to hydrate one day and have a good night freeze film one day

    Hope it helps!

  28. Anonymous users2024-01-11

    No, don't do it every day, it's not good.

  29. Anonymous users2024-01-10

    Summary. Hello dear dear, happy to answer for you: the answer is:

    Good night frozen film needs to be smeared with water emulsion before use, oh kiss 1The method of using the good night jelly mask is: after cleaning the skin at night, first do a good job of basic hydration and moisturizing skin care, and then take out an appropriate amount of ** on the surface of the skin, massage it evenly to promote absorption, and then sleep directly, it is not necessary to clean.

    2.The next morning, cleanse again and use a basic hydrating skincare product. After the massage is completed, the surface of the skin will not be sticky and will not stick to the pillow.

    3.The Good Night Gel can penetrate deep into the skin to better replenish enough moisture to the skin, and can also moisturize the skin, making the skin more hydrated and radiant. It can also adjust the water and oil balance on the surface of the skin to a certain extent, moisturize and moisturize the skin, and make the skin in a better condition.

    Hello kiss, I'm happy to answer for you: The answer is: Good night jelly film needs to be wiped before using the lotion Oh kiss 1

    The method of using the good night jelly mask is as follows: after cleaning the skin at night, first do a good job of hydrating and moisturizing skin care taken by the basics, and then take out an appropriate amount of ** on the surface of the skin, massage it evenly to promote absorption, and then sleep directly, it is not necessary to clean. 2.

    Cleanse the next morning and use a basic hydrating skincare product. After the massage is completed, the surface of the skin will not be sticky and will not stick to the pillow. 3.

    The Good Night Gel can penetrate deep into the skin to better replenish enough moisture to the skin, and can also moisturize the skin, making the skin more hydrated and radiant. It can also adjust the water and oil balance on the surface of the skin to a certain extent, moisturize and moisturize the skin, and make the skin in a better condition.

  30. Anonymous users2024-01-09

    Hello, I am glad to serve you and give you the following answers: You need to apply water lotion before using the good night cold film, and the reasons are as follows: 1. Applying water milk can smooth the fine lines on the surface of the skin, make the skin more compliant, make the good night cold film better adhesion, better retain moisture, and better moisturize the skin.

    2. Applying water lotion can improve the moisture and elasticity of the skin, make the skin more elastic, and make the good night jelly film better moisturizing. 3. Applying water lotion can protect, make the skin healthier, make the good night jelly film better absorb water, and make the skin more elastic. Directions:

    1. Cleansing: Wash your face with warm pure water to wash away dirt and oil on your face and keep your skin clean and fresh. 2. Wipe water lotion:

    Apply an appropriate amount of water emulsion to the face and gently massage it with your fingers to make the skin more comfortable and absorb water better. 3. Use the Good Night Gel Mask: Take an appropriate amount of the Good Night Gel Mask and apply it evenly to the face, so that the Good Night Gel Mask can better adhere to the skin and better moisturize the skin.

    4. Cleansing: Wash off the goodnight cold film, wash your face with warm water to keep your skin clean and fresh. Personal Experience:

    Applying lotion plays an important role before using the Good Night Cream, which not only makes the skin more conformable and elastic, but also protects** and makes the skin healthier. Therefore, be sure to apply lotion before using the Good Night Jelly Mask to achieve the best moisturizing effect.

Related questions
23 answers2024-04-16

I myself generally eat very little at night, because I have a problem, that is, I eat too much at night, or eat supper, I will have nightmares when I sleep at night, and I do it all night, which seriously affects my rest, so I rarely eat full at night, and I don't eat supper often, otherwise I will suffer again when I sleep, besides, for obese people, eat less at night, or don't eat supper, it helps to **, people grow fat, and they have to eat and drink endlessly, and the figure can be so good that it can be **, for physical health, The impact is also very large, and it is easy to get diseases, so we try to eat less at night, and people who are fat should also remember this to avoid causing physical harm.

21 answers2024-04-16

Should you blanch toon before eating? Most people have been doing it wrong, and now I'm telling you the answer.

13 answers2024-04-16

When flushing the toilet, should the lid be closed? It's a pity that I have done it wrong before, and I will increase my knowledge.

8 answers2024-04-16

The choice of car film should be considered from the three aspects of thermal insulation rate, light transmittance and ultraviolet filtration rate, professional car explosion-proof film is a high-tech product made by special process, and the metal layer of good explosion-proof film can be as many as 7 layers. For general products, light transmittance and thermal insulation rate are a pair of contradictions, but some of the more well-known brands are thermal insulation rate, light transmittance and ultraviolet absorption can reach certain indicators at the same time, and it is not easy to change color and fall off when attached to the car. Although well-known brands are more expensive, it is still worth spending money to buy quality, car film can better block direct sunlight from heating up in the car, in addition to blocking ultraviolet rays, beautifying the color of windows, explosion-proof and other functions. >>>More

31 answers2024-04-16

Look at personal preferences, the film is just to reduce the interference of ultraviolet rays and strong light on driving, if you want to paste, you can choose dragon film, Weigu, 3m Youzhuan and other brands, and you can go to the ** on the choice of better sales and less bad reviews of the film, now there is a special car film, the seller has helped you cut it according to the model, you can paste it yourself when you buy it, there is a **tutorial.