-
1.Reserved size for range hoods:
2.The air outlet pipe should not be too long, preferably not more than 2 meters, and the bending should be minimized to avoid multiple 90-degree bends, otherwise it will affect the effect of oil smoke.
3.The range hood should be installed directly above the center point of the gas cooker, and the distance between the bottom plane and the gas cooker should be within the range of 650mm-750mm.
4.Do not install the range hood in or near the strong air convection such as doors and windows, which will affect the effect of the range hood.
5.The gas stove should be directly below the range hood for the best smoking effect.
6.When in use, the smoke machine should be started 1 2 minutes before turning on the gas stove. When starting, the high-speed gear should be started, and the high-speed or low-speed can be changed according to the size of the kitchen smoke after starting.
7.When using, the window close to the smoke machine should be closed tightly, and the door should be opened a crack to prevent the formation of relatively large air convection, and can replenish the air in the kitchen in time.
8.After cooking, the range hood should not be turned off immediately, and it should continue to work for three minutes or even longer to ensure that the indoor air is fresh.
2.When buying a range hood, the average person is most concerned about the smoke absorption effect of the range hood, and the direct type is not suitable for the Chinese kitchen with large oil smoke, and the side draft range hood must be the first choice. But many times it is easy to ignore the size of the range hood.
If you don't pay attention to the size of the range hood, it is likely that you will not be able to install it at home, which completely disrupts the original decoration layout. At present, the width of the mainstream range hood on the market is mainly 750mm to 900mm in various sizes, and the width of the general European-style hood is 850mm.
3.There are many sizes of kitchen range hoods, and there are different sizes for different models.
European style: 900*530*566, side suction type: 900*403*539, 800*420*530, 800*410*530, specific sizes of each brand.
Chinese: It basically belongs to the "ceiling type" range hood, the size is generally 700mm-750mm, suitable for families with small kitchens, the requirements for cabinets are relatively small, and the size is suitable.
-
Look at what, Chinese range hoods are generally 70 to 75 cm, and side-draft range hoods are 90 cm in size.
-
Side-draft range hoods are suitable for small apartments.
-
The common sizes of range hoods are as follows: 795 395 510mm, 896 530 566mm, 750 394 500mm, 710 560 330mm, 890 52 550mm, 900 527 750 mm, 900 510 540mm, 900 500 585mm, 900 530 575mm.
The range hood is installed above the kitchen stove, which can quickly extract the waste burned by the stove and the harmful oil smoke generated in the cooking process and discharge it outside, and at the same time collect the oil smoke condensation, reduce pollution, purify the air, and have the safety guarantee effect of anti-virus and explosion-proof. The range hood needs to be cleaned regularly, and simple cleaning can not deal with the oil stains, and the range hood must be cleaned with a professional cleaning agent.
The use of range hoods.
1. When using the range hood, the environment with too much air convection around should be avoided, so that the smoke will spread too quickly and affect the effect of smoke exhaust.
2. If there is an abnormal sound in the range hood, the power supply should be cut off immediately.
3. When the oil pan**, for safety reasons, please turn off the range hood immediately.
4. The body of the range hood, the smoke collection hood, the net cover, etc. have been in the environment of oil smoke pollution for a long time, and the surface should be scrubbed frequently, and it should be cut off when scrubbing.
Power supply. 5. When the oil in the oil cup accumulates to a certain amount, it should be cleaned up in time to avoid the oil spilling and polluting the body.
-
It varies depending on the brand model.
There is no fixed size, and the common range hood rulers are: 890 52 550mm, 900 527 750mm, 900 510 540mm, 900 500 585mm, 900 530 575mm, 795 395 510mm, 896 530 566mm, 750 394 500mm, 710 560 330mm, etc.
When purchasing a range hood, the size of the range hood must be used as a key reference condition, because the larger the size of the range hood, the more the table will be covered, and the net absorption rate of the range hood will naturally increase.
If the size of the range hood is not suitable, then there will be a situation where the size of the range hood is too large and cannot be installed, or because the size of the range hood is too small, resulting in a decrease in the net absorption rate of the range hood.
-
Stove 30 to 35 inside.
Between 30 cm and 35 cm.
This is the hood and cooktop height.
At present, the common sizes of range hoods on the market are as follows: 900 510 540mm, 900 500 585mm, 890 52 550mm, 795 395 510mm.
The size of the stove is about 760 460 80 mm. The opening size of the gas stove is 680 350mm, and the length of the opening size is usually about 630 700mm.
-
Now there are more and more types and functions of range hoods on the market, but in the traditional concept, suction power is still an important indicator or even the only indicator for most families to choose range hoods. If you want to buy a suitable range hood, you need to consider a number of indicators.
First of all, let's talk about why the greater the suction, the better, which is inseparable from the working principle of the range hood, and the simplest way to explain the principle is: use a fan to extract air. However, the fan of the range hood is different from the ordinary fan, the fan of the ordinary fan belongs to the axial flow type, while the professional range hood uses a centrifugal fan, theoretically speaking, the greater the power of the centrifugal fan, the greater the suction.
In this way, when the range hood is working, negative pressure is generated through the fan, so that the air full of oil smoke flows out of the kitchen, so as to reduce oil smoke pollution and achieve the purpose of use.
However, the relationship between suction, air volume and noise is directly proportional, that is to say, the greater the suction power, the greater the noise, the greater the air volume, and the higher the requirements for the air duct. At present, the air duct of most residences is fixed, and when the suction power is too large, the air duct cannot match it, so we can not only rely on the size of the suction power to choose the range hood, but also according to the actual situation of our own house.
In general, if you want to judge whether a range hood can meet the actual needs, you should measure it from the type of range hood, that is, its structure, the balance of suction air volume and noise, the material style and the cleaning convenience.
Robam range hood 67A7 has an ultra-high speed motor, the maximum speed can reach 1000 rpm, the horsepower is more powerful, and the low-friction bearings also make the operation noise lower. In addition, it is equipped with an ultra-long power wind wheel, the diameter is lengthened to centimeters, the impeller is increased to 60 pieces, and the vertical design is not equal at the same time, which can form a left and right wind pressure difference, and the left and right smoke intake at the same time, and the smoking speed is faster. In addition, it also has a wave of the hand stir-fry function, through the built-in infrared induction, the hand in front of the panel can be waved lightly, you can turn on the stir-fry air volume, more intelligent and convenient to use.
Robam Energy Efficiency Side-Draft Range Hood Set, Side-Draft Range Hood adopts a mirror-like elegant appearance and orange smart buttons to make the whole more fashionable. Convertible intelligent opening and closing technology makes tobacco control more comprehensive. The large oil cup and the detachable oleophobic net make cleaning easier.
The flat glass panel allows oil smoke to adhere to nowhere to go. The gas stove adopts a three-layer explosion-proof design, plus a silicon-aluminum alloy stove head and a square pot holder, and the overall appearance is beautiful and atmospheric.
-
In daily life, in fact, there are many commonly used range hood sizes, various brands, styles, types of range hood sizes are different, in the purchase, consumers have to look carefully, the following is a list of several common range hood sizes: 890 52 550mm, 900 527 750mm, 900 510 540mm, 900 500 585mm, 900 530 575mm, 795 395 510mm, 896 530 566mm, 750 394 500mm, 710 560 330mm, etc.
-
Hello! Glad to answer for you! The size is considered according to the brand, style, and type, for example, Fotile JX05 is 795 395 510mm, Midea DJ02A is 896 530 566mm, Boss CXW-185-5100 is 750 394 500mm, and Sakura SCR-3253G
710 560 330mm, Xiaobawang CXW-230-T07 is 890 52 550
mm, German-Italian CXW-200-1866 is 900 527 750
MM, Haier CXW-219-J67V is 900 510 540mm, Vantage 204E2 is 900 500 585mm, Siemens LC35SK955
-
Different types of range hoods have different installation height standards:Installation height of side suction range hood The installation height of the side suction range hood is appropriate to ensure the effect of range hood; The normal installation height is 350mm to 400mm from the bottom of the hood and the top of the stove.
The installation height of the European range hood is 650mm to 750mm from the bottom of the European range hood to the reference height of the stove countertop.
Attention to the use of range hoods:
Many users turn off the range hood immediately when cooking, which does not play its role, the correct way to use it is to turn it on as long as the cooking is started, until the whole cooking is over and then turned off after 5 or 6 minutes. In this way, the residual harmful gases in the kitchen can be discharged to the greatest extent and prevent them from remaining in the kitchen, so as to prevent harm to human health.
When using the range hood, do not directly let the range hood face the burning gas stove, if you need to hold the pot, turn off the gas as soon as possible, beware of being adsorbed by the range hood by the flames, and prevent the occurrence of fire.
-
Please ask if this one is high and that one is wide.
-
The size of the hood varies depending on the brand, the model and the installation method. Generally speaking, the common range hood size is 60 cm, 75 cm, 90 centimeter or 120 cm, etc.
-
The size of the range hood is generally determined according to the size of the kitchen and the size of the stove, usually according to the size of the stove to choose the size of the range hood, generally there are the following common sizes:
60cm: suitable for smaller kitchens, the cooktop size is generally 60cm or below.
70cm: suitable for medium-sized kitchens, the size of the cooktop is generally about 70cm.
90cm: suitable for larger kitchens, the size of the cooktop is generally around 90cm.
In addition, there are some non-standard size range hoods, such as 120cm or 150cm, etc., which are usually suitable for large kitchens or commercial kitchens. It should be noted that when choosing the size of the range hood, it is also necessary to consider factors such as the exhaust capacity and design style of the range hood to ensure that the range hood can effectively discharge the fumes and odors in the kitchen.
-
The size of different brands and models and range hoods will be different, but the length is mostly 75cm-90cm, the width is 50cm-55cm, and the height is 55cm-75cm.
-
The size of the range hood varies depending on the brand and model, but generally speaking, the size of the range hood includes the following common specifications:
-
15-20cm。
Range hood pipe size of 15-20cm, the main large air volume range hood pipe on the market is mainly 17cm or 18cm, and the general Chinese hood is about or right, single-motor side-suction wax preparation is about and about, dual-motor side-suction is about and about.
Precautions for range hood duct installation.
1. There are two ways to install the range hood pipe, one is to install the top of the hanging round cavity, and the other is to install the hanging cabinet.
2. The smoke pipe must be embedded before installing the ceiling, otherwise it will be troublesome to open the hole in the later stage.
3. The smoke machine should be as close as possible to the public flue mouth, so that the smoking effect is better, and the air volume of the smoke machine will be reduced by 5% for every 1m increase in the distance of the smoke machine. Therefore, it is recommended that the installation distance does not exceed.
4. From the air outlet of the range hood to the public flue, follow the principle of short orange shirt and less turns, and try not to change the diameter of the smoke pipe.
5. When installing the range hood pipeline, it is necessary to avoid the twisting path and reduce the impact on the smoke exhaust effect.
6. It should be noted that the installation height of the bottom of the range hood from the stove table is 65cm to 75cm.
Adjust the speed of the range hood according to the size of the cooking smoke, if it is just a simple cooking, you can put it in low gear, which is not only low noise, but also saves electricity.
Motors are equipped with wind wheels or directly modified with exhaust fans, and these devices are used to suction fumes. >>>More
In daily life, in fact, there are many commonly used range hood sizes, and the sizes of various brands, styles and types of range hoods are different. >>>More
1. How to choose a range hood - according to the overall style of the kitchen. >>>More
The owner is very nice, old brand.
The installation height is generally around 700mm, and its. >>>More