How to place a router at home with a good signal and no effect on the body?

Hello everyone, I am Daming,The router at home can be placed in the middle of the whole house normally,There are no metal objects around the router to receive wireless signals normally,About the problem of whether the router has an impact on the body,You don't need to worry,As long as you buy the router produced by the regular manufacturer,The electrical radiation does not exceed the national limit standard is safe,Next, Daming will talk in detail,The correct placement method of the wireless router,And some precautions for using the router。 <>

The way to place the wireless router correctly at home

The reason why the wireless router should be placed in the center of the home is mainly due to the radio radiation range, the center position can radiate to the space of the whole room, if the position is deviated, it will lead to a corner of the room to receive wireless signals poorly. <>

In this way, as long as you buy a router with a better effect on the wall, and place it in the middle of the whole house, the wireless signal can cover every corner of the room. <>

Precautions for placing a wireless router at home

The placement of the router should pay attention to the surrounding metal objects or household appliances, so as to avoid interference with the wireless signal, the working principle of the wireless router is similar to the mobile phone, if there are metal objects or some buildings around when you use the mobile phone normally, the signal will be intermittent, and the signal of the mobile phone is full in an open environment, so the wireless router is the same, pay attention to the surrounding environment. <>

Summary

Since the router is basically working 24 hours a day, this will lead to the instability of the router and affect the reception of the signal, it is recommended that you turn off the router when you are not using the mobile phone, or when you are resting at night, which can greatly save the service life of the router!

Is there any better way to put a router at home with a good signal?

The above is the content shared today, I hope it will be helpful to everyone, if you agree with Daming's point of view, just like it, pay attention to it, open the "APP" and search for "Computer Technician Daming" A large number of original computer knowledge for your reference, this issue of Q&A is here, let's see you next time!

It's not important, whether the signal is good or not mainly depends on the parameters of the router, it has nothing to do with the location, and it has no effect on the body! No impact! No household appliance produces radiation that is harmful to the human body!

It is best to place your router in an open place in your home, so that the signal of the router will spread around the same strength tide, and the signal will be better. The radiation emitted by household electronics decays very quickly and has almost negligible penetration. The radiation of a router is much smaller than that of a mobile phone.

You can place the router in an open place, not in a corner, as this will block the signal. Keep it away from the bedroom.

It's best to place the router away from the bedroom, because the longest time people spend at home is in the bedroom.

Electrical appliances around the wireless router can interfere with the wifi signal and internet speed. Therefore, the wireless router must be placed in a ventilated place to avoid the connection drop due to the high heating temperature.

Hello how to place the router:

1. The wireless router should be placed in an open place, and the antenna should be placed vertically;

2. If it is placed in the middle of the whole room, there will be no problem with the signal of other rooms;

3. If it is placed near a window, then there is absolutely no pressure on the signal near other windows in the same direction;

The wireless router with a power of 4,150m is enough for the family, and it is not recommended to use the 300m one, as the radiation is harmful;

5. There is a setting about power in the router settings, and you can adjust it to the maximum. This option is generally found in "Wireless Management - Advanced Settings - Power Settings";

6. The wireless router can penetrate up to 2 walls, and the vertical effect is better; As a result, the neighbors on the upper and lower floors of your home receive better signals than the same floor;

In order to have greater coverage, the routers we use are generally omnidirectional antennas, that is, the signal is the best in the horizontal direction of the router antenna, and the signal is very poor in the vertical direction in the same direction as the antenna.

Therefore, when we place the router antenna, we will have good signal coverage if we place it vertically, and if you put the antenna horizontally, then a large amount of signal will only be transmitted to the ceiling and the ground.

The router antenna is like this, the wireless network is the strongest, and the network speed is swishing!

The router has a better signal when it is placed in an open place and away from electronic devices.

Most routers have 2 or even 5 antennas, preferably one horizontally and one vertically, when the antenna inside the device is parallel to the router, the wifi link is the fastest, because most laptops have built-in antennas that are horizontal, and the phone depends entirely on the posture of the hand. If you place the antennas of the router vertically and horizontally, there is a greater probability that the device will be parallel to the router. Do not place the router on the ground, the signal does not pass through like metal, concrete, cement, etc.

And there are some routers that will send the signal down where it is useless. Many electronic devices will interfere with the router signal, such as televisions, computers, induction cookers, etc., basically all built-in motors will interfere with the signal, so it is best to put the router away from the electronic equipment. Ulnar tremor.

How routers work

The router should have at least two network ports, one connected to the LAN or the other on the WAN subnet, and each port must have a unique IP address and be the same as the network number of the IP subnet to which it is connected. Different ports have different network numbers and correspond to different IP subnets, so that the hosts in each subnet can send the required IP data to the router through the IP address of their own subnet.

When the router receives an IP datagram, it first evaluates the packet and then performs further processing based on the judgment result. If the datagram is valid or correct, the router discards the packet based on the destination IP address of the datagram. If the destination IP address of this datagram is directly connected to a subnet of the router, the router will send the packet to the destination subnet through the corresponding interface.

At home, the router is best placed in the house.

The antenna in the wireless liquid router emits about electromagnetic radiation waves. The Wi-Fi signal is greatly blocked when passing through the wall, so the signal is best if you place the router in a straight line from the device. Sometimes the Wi-Fi signal stops propagating and disappears into a corner because the reflected signal overlaps and cancels each other out.

These dark spots make the Wi-Fi signal weaker.

Therefore, when using the router, it is best to surf the Internet around the router and guarantee that there are no obstacles in the way.

Note: Don't sit in the corner and play with your phone, which will be the worst place in the room.

The wifi is mainly from the signal sent by the router, and it can be used when the mobile phone is connected. But sometimes the signal of the router will be very poor, which will affect the network speed. Generally, the router is recommended to be installed in an open place, and it is best to have nothing else around, otherwise it is likely to affect the signal.

So what affects the signal on which side of the router is noisy?

1. Household appliances. Some will put the router on top of the TV, microwave oven, camera and other electrical appliances, although convenient, but it is influential. The internal coil of the appliance will generate a magnetic field, and if the appliance is placed next to the router, it will interfere with the router to receive and release signals, so the router will have a bad signal and a slow network speed.

And the larger the appliance, the slower the router will be able to retract and release the signal. However, many routers are not affected by TVs now, but if they are Bluetooth controlled, they will still be interfered with.

2. Metal objects. Metal interferes with electromagnetic waves, and if there are metal objects or decorations nearby, it can also have an effect.

3. Glass items. Glass can also block signals, which can be an impact if there is a water cup or fish tank next to the router.

The above is an introduction to what affects the signal next to the router, so try not to put the above things next to the router in life.