How to solve the Xerox 5955 toner control failure

Xerox 5955 Because the drum assembly is combined with the developer assembly, the use of compatible powder with poor powder quality or mismatch will cause poor powder supply, which will trigger the machine to report toner control failure, the possibility is as follows:

The toner is agglomerated or the particles are too large. 59. The machine uses low-temperature toner, and poor powder quality or poor use environment will fundamentally lead to this problem;

The poor operation of the toner in the developing part, such as the deformation of the developing stirring rod and the wear of the developing transmission gear, will make the development rotate abnormally and the toner concentration abnormal, resulting in machine failure;

Drum assembly problems, blockage of drum components in toner cycle, excessive wear or deformation of some hardware;

The machine is short of powder, and the powder cartridge is empty.

The corresponding solutions are mainly the following two points:

Find a high-quality toner supplier, good toner can solve most problems;

Replace the corresponding accessories, the reference life of the drum assembly is 250,000, if you use compatible powder, it will significantly increase the loss of some accessories, and you need to pay attention to the replacement cycle;

Finally, contact the seller for technical assistance and corresponding operations, such as how to disassemble the drum assembly and powder assembly of the 5955, how to dredge and replace the accessories.

My 5955 is also a powder ink control system failure, or r1 is missing, and it has not been repaired, have you solved it?

I heard that the sales said that more than 70 yuan can play more than 30,000 sheets, you can ask ** to go.

Xerox 5875 is a versatile color copier for corporate offices and individual users. However, the copier sometimes malfunctions, affecting its normal use. Here are some of the possible causes and solutions for the Xerox 5875 copier.

1.Poor print quality.

If the print quality is poor, it may be because the cartridge is dry or the cartridge is expired. At this point, you can replace the cartridge with a new one to solve the problem. It could also be that the printhead is not cleaned or needs to be calibrated. It can be cleaned and calibrated by utility.

2.Poor scan quality.

If the scan quality is poor, it may be because the scan head is dusty or needs to be cleaned. At this point, you can use a soft cloth to gently wipe the scan head, or use a cleaning card to clean it.

3.Paper jamming.

If the paper is jammed, it may be due to the fact that the paper is too thick or the paper type is incorrect. At this point, you can replace the thinner paper or replace the correct type of paper.

4.The printer cannot connect.

If the printer can't connect, it may be due to a network failure or a corrupted driver. At this point, you can check the network connection or rebirth key to newly install the print driver.

5.System error.

If there is a system error, it may be because the operating system is incompatible or the operating system driver is corrupted. At this point, you can update or reinstall the driver to resolve the issue.

In conclusion, the Xerox 5875 is a high-quality color copier, but it still needs frequent maintenance and upkeep to keep it in top condition. If something goes wrong, it's recommended to take prompt action and follow the relevant operating guidelines.

Summary. Xerox 5570 print blue blur can be caused by the following reasons: Cartridge Issues:

If the cartridge has been used for a while, it may cause the color to be printed unclear, especially the blue color. It is recommended to replace the cartridge with a new one. 2.

Problems with print quality settings: If the quality settings of the print are incorrect, it can also cause color blurring. Check your printer settings and make sure you have selected the correct print quality.

3.Printhead Problem: If the printhead is damaged or dirty, it may lead to poor print quality and blurry colors.

It is recommended to clean the printhead or replace it with a new one. 4.Paper Issues:

If you print on paper that doesn't fit, it can also cause color blurring. Make sure to use paper that is appropriate for the printer.

Xerox 5570 printing blue blur can be caused by the following reasons: Cartridge problem: If the ink cartridge has been used for a while, it may cause the printed color to be unclear, especially the blue color.

It is recommended to replace the ink cartridge with a new one. 2.Print quality setting issues:

If the quality of the print is not set correctly, it can also cause color blurring. Check your printer settings and make sure you've selected the correct print quality. 3.

Printhead Problem: If the printhead is damaged or dirty, it may lead to poor print quality and blurry colors. It is recommended to clean the printhead or replace it with a new one.

4.Paper issues: If you print on paper that doesn't fit, it can also cause color blur.

Make sure to use paper that is appropriate for the printer.

Can you tell us more about that?

Workarounds: Based on the above reasons, here are some possible workarounds:1

Replace the cartridge with a new one. Check the printer settings and select the correct jungler key to print quality. 3.

Clean the printhead or replace it with a new one. 4.Make sure to use the appropriate paper for the printer.