What should I do if the Diagnostic Policy Service cannot be enabled?

Press the F8 key when starting the computer, select "Safe Mode with Command Line Prompt" in the "Windows Advanced Options Menu" operation interface, enter the system, then click "Start Run", enter "cmd", enter "Command Prompt" dialog box and press "Enter" to open "Console", click "File Add Remove snap-in Add" button, select "Group Policy Object Add" button, and then click the "Finish" button.

Next, in the Console dialog box, select "Local Computer" Policy and click the "Add" button, then go in and disable the "Only run licensed Windows applications" policy.

In another case, we can't even enter the safe mode, so we can go to the "Failback Console", use the cd command to enter the "C: Windows System32 GroupPolicy" directory in turn, run the "del f q command", delete the group policy settings file, and then restart the computer to recover.

File corruption, replacement of file. Go online next, replace on the line, it is recommended to reinstall the system, there may be errors in the replacement.

There are many reasons, and the specific reasons are analyzed on a case-by-case basis, for example, it depends on how you connected to the Internet, whether there is a problem with your network connection settings, or it may be the network itself.

Operating computer: Macbook

Operating System: The workaround for diagnosing that the Policy Service has been disabled is as follows

1. First, click Try to make these fixes as a managing consumer to see if you can solve the problem. If it doesn't work, open the control panel, enter and find the system and security.

2. In the system and security interface, find the Mausoleum Collapse Management Tool, then find the service option in the drop-down bar, find the windowsinstaller, open the properties window, find the service type, change manual to automatic, and press the application button.

3. If the start button in the service state is normal, you can click the start button to start the diagnosticservicehost service, if the start button is gray, you need to wait for a few minutes.

4. If you can't do it, you can click the help me on the button to configure the start service project and follow the above prompts. Once you're done, you'll need to restart your computer and the Policy Service will work normally.

Diagnostic Policy Service Role:

The Diagnostic Service host is used by the Diagnostic Policy Service to host diagnostics that need to be run in the context of the local service. If you stop the service, any diagnostics that depend on the service will no longer run.

If the service is disabled, all services that are shown to depend on it will not be able to start. <>

Summary. Hello dear! We'll be happy to answer for you.

How to solve the problem if the diagnostic policy service has been disabledAnswer: Open the service method: Go to the control panel and select "System and Security".

Once you are in the System and Security window, find the "Administrative Tools" section in the box on the right. On the Management Tools page, select Services in the right window. Go to the service dialog window and find the "diagnostic service host" item.

Double-click to open the Properties window. Under the General tab of Properties, find "Service Type", set it to "Automatic", press the "Apply" button.

Hello dear! We'll be happy to answer for you. How to resolve the issue that the Diagnostic Policy Service has been disabled?

Open the service method: Go to the control panel and select "System and Security". Once you are in the System and Security window, find the "Administrative Tools" section in the box on the right.

On the Management Tools page, select Services in the right window. Go to the service dialog window and find the "diagnostic service host" item. Double-click to open the Properties window.

Under the General tab of Properties, find "Service Type", set it to "Automatic", press the "Apply" button.

It's automatic.

Kiss, which means that the policy service has been disabled, just start it. 1. Right-click on the desktop "Computer" and select "Management", go to "Services" under "Services and Applications", find the "Diagnostic Policy Service" service on the right, and set it to "Automatic" and "Enabled"; 2. The "diagnostic service host" service is set to "enabled" and "manual"; Set the "diagnostic system host" service to "manual".

Hello dear, glad to answer for you: The workarounds for diagnosing that the Policy Service has been disabled are as follows:1

Click on the Start menu, select "Control Panel", and click to enter the Control Panel window. 2.Find "System & Security" on the Control Panel interface and click to enter the System & Security window.

2.On the System & Security page, find "Management Tools" and click to enter the Management Tools window. 3.

On the management tool interface, find the "Services" option and click to enter the service window. 4.Go to the service dialog window, find the "diagnostic service host" item, and click to open the properties window.

5.Under the General tab of Properties, find "Service Type", set it to "Automatic", press the "Apply" button. 6.

If the Start button under Service Status is normal, click the Start button to start the Diagnostic Service Host service and click OK. 7.If the Start button is grayed out, it can't be clicked.

You may need to wait a few minutes. If you don't start it after a few minutes, you can click "Help me configure the startup service item" on the button, and the system will enter the "Configure Service Startup Method" in the Micosoft Management Console. 8.

Find "Configure Service Startup Mode" on the left side of "Configure Service Startup Mode" in the micosoft management console, click on it, and a prompt will appear on the right side of the window how to use the command to enable the service.

Computer system: win7

Workaround for diagnosing that the Policy Service has been disabled:

1. Start, Run, Enter: Click OK (or press Enter) to open the service.

2. Find the diagnosticpolicyservice service in turn: If the diagnosticpolicyservice service is not opened, right-click to start.

3. If it can't be started (the menu is gray at this time), it is because the startup mode is incorrect, double-click the service, or click the property to open the service to the startup type to the point to adjust to automatic or manual to apply to the startup to OK.

Win7 system:

Microsoft officially launched Windows 7 in the United States on October 22, 2009 and in China on October 23, 2009, and then successively released multiple versions such as Home Edition, Professional Edition, Enterprise Edition, and Ultimate Edition. Among them, the 64-bit flagship version is the ultimate version of Microsoft's Windows 7 series, which can support up to 256 processor cores. <>

1. On the Windows 10 desktop, right-click the "This Computer" icon and select the "Manage" menu item in the pop-up menu.

2. At this time, the windows 10 computing first call machine management window will be opened, and click "Services and Applications" on the left sidebar in the window.

Services" menu item.

3. Find the "Diagnostic Policy Service" service item in the window on the right.

4. Right-click on the service item, and then select the "Properties" menu item in the pop-up menu.

5. Next, in the property window of the service item that opens, click the "Start" button to start the service.

6. At the same time, for the next time the service will be automatically started, we click the "Startup Type" drop-down button, select the "Automatic" menu item in the pop-up menu, and finally click the OK button, so that after restarting the computer, there will be no more prompts that the diagnostic policy server is not running.