Can I still connect the earphone cable if it is broken? How to connect the headphone cable when it i

Hello! This one... Theoretically, yes!

As long as the headphone cable is not broken! Generally, the welding place can be repaired! However, if the earphone cable is broken, then you have to buy the earphones again!!

And if you go to a repair shop, they will usually only recommend you to buy again! Because for profit! Changing headphones is more cost-effective than helping you repair **!

If you have friends you know at the mobile phone repair shop, ask them to help!! Huh

It can be connected, just scrape off the paint on the outside of the enameled wire and weld it on, but the headset is only a few dollars, and the better ones are only a few dozen dollars, there is no need to connect, and it is very inconvenient to use after taking it.

If the external wiring of the earphone speaker is broken, it can be connected, and the copper wire has an insulating paint when connected, and it will be easier to connect it after scraping it clean, and finally restore the insulation OK; If the inside of the speaker is broken, then there is no way.

It can be repaired, the main thing is that you have to find the place where your headphones are disconnected, and you can pick it up according to the money of the same color, and burn the copper wire with fire before wiring, otherwise the enameled wire will not be electrified

Upstairs is right, there is a different color inside that is enameled wire, and the outer bread of that wire has an insulating coating, which needs to be scraped off to solder. The two enameled wires are separated as two and connected to the left and right points of the plug, and the remaining multiple wires are screwed together, which is considered one, and is connected to the point on the outer edge of the plug, which is fine.

It can be connected, but it is more difficult to connect, you can weld the same color wire, but it is better to replace it with a new one, and the new one is easier to use.

How much is it, a few dollars is better to buy it, I took it, it was the original place, not another head, so that it can be used.

Preparation materials Tools: headphone cable, lighter, transparent glue.

Steps. 1. Cut off the outermost black rubber layer and leak out the metal wire inside.

Steps. 2. Use a lighter to burn off the insulation layer on the outside of the copper wire. Just a few times over the flames.

Steps. 3. After burning, the ashes of the insulation layer are still left on the wire, which can be scraped off with scissors and other items to ensure that it can be turned on after connection.

Steps. Fourth, connect the corresponding threads. If you can't tell which one is right from the other, there are two ways: 1. Look at the color, 2. Plug in the headphones and try to see how they can work properly. Combining the two judgment methods can be accurately distinguished.

Steps. 5. After the connection is completed, wrap the wire end with transparent tape or other insulating materials.

Steps. 6. You can put the connection in the small box of adjustment, which not only protects the stability of the connection part, but also keeps the earphone beautiful after repair.