Dear relatives, how to clean the Oaks vertical air conditioner?

1. Check whether the air conditioner is running normally before cleaning, and then turn off the missing power supply. 2. Liquidate the floating dust of the air conditioner profile and establish a signage at the same time. 3. Remove the shell and panel of the air conditioner according to the manual, and take out the filter.

4. Wet the parts to be cleaned with a 5L watering can to facilitate the foaming effect during cleaning. 5. Spray the air conditioner cleaning agent on the cleaned fin with a watering can, and let it reflect for 5 8 minutes so as to thoroughly penetrate, analyze and remove the stains in the shortcomings and general situation of the fins. 6. Use a steam spray cleaning machine to sterilize, disinfect and analyze oil stains on the cleaned fins.

7. Use a scraper to scrape the foam of the fin profile, and the unswept stubborn dirt and deformed fin can be cleared with the fin comb. 8. Use an air conditioner cleaning machine to clean the cleaned radiator with clean water. 9. Clean the filter screen and replace the panel.

10. Place the casing and panel, install the air conditioner back to the original position, and start the machine for 20 minutes to check and receive.

I think you can find a professional to clean the air conditioner, but as far as I know, Oaks's vertical air conditioner has an automatic cleaning function, you can find the manual of your air conditioner to see if it has an automatic cleaning function, if it has an automatic cleaning function, as long as you press it to automatically clean, which is very convenient.

Living room standing air conditioner cleaning:

1. To disassemble the panel for cleaning the vertical air conditioner, you must first use a screwdriver to open the screws on both sides of the fuselage panel, and then you can open the panel.

2. Then take out the filter of the vertical air conditioner in the living room directly.

3. Then take the filter of the vertical air conditioner in the living room to the bathroom and use the shower head to pour water from the back of the filter to clean the dust, or you can add some neutral cleaning liquid appropriately, and after cleaning the filter screen of the vertical air conditioner, it is also placed in a cool place to air dry.

4. When the filter screen of the vertical air conditioner in the living room is dry, it can be reinstalled back into the air conditioner, then cover the panel, and screw it to fix.

Household Air Conditioner Radiator Cleaning:

1. There is also a heat sink behind the filter, which is easy to be ignored when cleaning household air conditioners.

2. The cleaning method is to spray the heat sink 2 3 times repeatedly with professional detergent.

3. Then wait for about 5 minutes to allow the cleaning agent to fully dissolve the dust and kill the bacteria, and then install the dust filter back on, and start the machine for 20 to 30 minutes.

If you want to use the automatic cleaning function of the Oaks air conditioner, then you only need to press the "Clean" button on the remote control, and then the air conditioner will automatically clean the evaporator of the indoor unit.

The air conditioner first enters the refrigeration state instantaneously, the purpose is to freeze the dirt on the evaporator (including water), and then instantly enter the heating state, so that the Duan blind melts the frozen dirt and water together, and then discharges it, and finally the air conditioner automatically dries the surface of the evaporator.

If the air conditioner is not cleaned for a long time, then the inside of the fuselage will accumulate dust, and the air conditioner at this time consumes a lot of electricity and affects the cooling and heating effect, on the other hand, it will also pollute the indoor air and increase indoor dust and mold. The automatic cleaning function of the Oaks air conditioner can effectively remove dust and other dirt, so that the air conditioner can maintain good cooling or heating efficiency.

The new function of Oaks air conditioner: fresh air function: the operation of ordinary air conditioner is in a closed room, and the indoor air quality will deteriorate after a long time of operation.

Fresh air refers to the exchange of indoor and outdoor air through the air duct to improve the freshness of indoor air. Generally, the fresh air is mainly changed in one direction, that is, the air from the indoor is discharged to the outside, which is only equivalent to the role of a one-way exhaust fan.

Modern air conditioners such as Oaks air conditioners use two-way fresh air exchange technology, which can not only realize the flow of indoor and outdoor air, but also make the indoor air really smooth and not lose energy by supplementing it with various air cleaning methods.

The Oaks air conditioner automatic cleaning function needs to be set up by following the steps below:

1.Turn on the remote control of the Oaks air conditioner and enter the menu of setting the silver guard.

2.Find the "Auto-clean" option and select "On".

3.Once set, the air conditioner will be automatically cleaned in about 10-15 minutes.

4.Once the cleaning is complete, the air conditioner will automatically stop running and wait for the next use.

It should be noted that the automatic cleaning function only cleans the inside of the air conditioner, and cannot replace the regular cleaning of the air conditioner filter and the external body. It is recommended that the air conditioner be thoroughly cleaned every quarter.

<>The method of cleaning the Oaks air conditioner is as follows:Unplug the air conditioner.

Open the front cover.

Take out the air filter and rinse it directly with clean water.

Use a towel to wipe the dust inside the air conditioner.

Rinse the cover in water.

Replace the filter, cover and screws. The air conditioner can be cleaned up.

If the above methods do not work, it is best to contact a professional cleaning company. They can provide you with professional technical support.

How to clean the Oaks air conditioner, this question may need to be decided according to the type and usage of the air conditioner. According to and 3, generally speaking, there are several ways to clean an Oaks air conditioner:

If it is a split air conditioner, you can disconnect the power first, remove the filter and wash off the dust with clean water or mild detergent. Then spray the special cleaning liquid evenly on the air inlet surface of the air conditioner evaporator, install the filter, turn on the air conditioner and adjust the air volume and cooling capacity to the maximum, keep the air conditioner on for about 30 minutes, and let the cleaning liquid dissolve and discharge the dirt and bacteria on the evaporator.

If it is a cabinet air conditioner, you can disconnect the power supply first, remove the panel of the cabinet unit, and find the evaporator of the air conditioner. Then shake the special foam cleaner evenly and spray it evenly on the air conditioner evaporator, then cover the panel, let it stand for about 10 minutes, turn on the air conditioner and adjust the air volume and cooling capacity to the maximum, keep the air conditioner on for about 30 minutes, and let the foam cleaner remove the dirt and bacteria on the evaporator.

If it is a vertical air conditioner, you can disconnect the power supply first, turn on the buckle panel protrusion of the front panel, open the panel to a position of about 60 degrees, and then pull out the air filter. Wash the filter with clean water or mild detergent and use a soft brush to clean the dust from the heat sink. Then dry the filter and reset it, and cover the panel.

Before cleaning, you need to disconnect the power supply of the air conditioner, open the buckle of the front panel to hold the panel protrusion, open the panel to the position where the panel is stopped, about 60 degrees, and then pull out the air filter slightly upwards and lift the handle of the air filter** upwards and pull it downward. If the filter is not too dirty, you can rinse it directly with clean water or use a vacuum cleaner to clean it. However, if there is a lot of dust, you need to soak it in water with a neutral detergent for about a quarter of an hour, scrub it with a soft-bristled brush, and dry it well before installing it.

Summary. <> pro

<> what needs to be cleaned is the shell of the air conditioner, the shell of the air conditioner is exposed to the air for a long time, it is easy to accumulate some dust on the shell, then you can use a clean towel or rag dipped in some water to scrub when cleaning the shell of the air conditioner. At the same time, you also need to pay attention to cleaning some dead corners of the air conditioner, and the dust on the top of the air conditioner is the most part. The air conditioner filter needs to be taken out to clean it, and then we need to open the air conditioner panel, and there are two raised parts on the air conditioner panel, and when you open the panel, you need to pass through it.

After the panel is opened, the air conditioner filter can be removed. When cleaning the filter, you can use a vacuum cleaner or use water to rinse it off, and when there is a lot of dust, you can soak it in water with neutral detergent for about 10 minutes, and then put it in a cool and dry place to dry after cleaning. To clean the evaporator of the Oaks air conditioner, you need to use an air conditioner cleaning agent.

After finding the air conditioner evaporator, shake the air conditioner cleaning agent evenly and spray it evenly on the air conditioner's evaporator, then cover the panel of the air conditioner, let it stand for 10 minutes, plug in the power of the air conditioner, and turn on the air volume of the air conditioner to the maximum for 30 minutes. Stains in the air conditioner will flow out of the air conditioner along with the air conditioner drain pipe.

How to clean Oaks vertical air conditioner.

<> pro

<> what needs to be cleaned is the shell of the air conditioner, the shell of the air conditioner is exposed to the air for a long time, it is easy to accumulate some dust on the shell, then you can use a clean towel or rag dipped in some water to scrub when cleaning the shell of the air conditioner. At the same time, you also need to pay attention to cleaning some dead corners of the air conditioner, and the dust on the top of the air conditioner is the most part. The air conditioner filter needs to be taken out to clean it, and then we need to open the air conditioner panel, and there are two raised parts on the air conditioner panel, and when you open the panel, you need to pass through it.

After the panel is opened, the air conditioner filter can be removed. When cleaning the filter, you can use a vacuum cleaner or use water to rinse it off, and when there is a lot of dust, you can soak it in water with neutral detergent for about 10 minutes, and then put it in a cool and dry place to dry after cleaning. To clean the evaporator of the Oaks air conditioner, you need to use an air conditioner cleaning agent.

After finding the air conditioner evaporator, shake the air conditioner cleaning agent evenly and spray it evenly on the air conditioner's evaporator, then cover the panel of the air conditioner, let it stand for 10 minutes, plug in the power of the air conditioner, and turn on the air volume of the air conditioner to the maximum for 30 minutes. Stains in the air conditioner will flow out of the air conditioner along with the air conditioner drain pipe.

The last thing to clean is the radiator of the Oaks air conditioner, which is usually a special cleaning product for spraying.