As soon as I put the gas pedal, what is the reason why the oil lamp turns on?

What is the reason when the oil pressure indicator lights up when the car accelerates? It's important to be clear about these points.

Nowadays, cars have become the most important part of our lives. Cars bring a lot of convenience to our lives, but at the same time, cars often bring us some small troubles. When there is a problem with our car, it often worries many of our drivers.

Car oil is something we can't ignore when driving, so how can the oil indicator light turn on when we accelerate? What should we do when we encounter this problem? And how can we prevent it?

1. How can the oil pressure indicator light up when we accelerate?

1. The reason for the oil.

Engine oil is a very important part of our car purchase, many drivers will choose informal ways to get engine oil because of the high engine oil, but this often makes us misuse inferior engine oil. And low-quality engine oil often causes our car to turn on the oil pressure indicator when accelerating.

2. Too little oil.

Sometimes in the process of driving, we will find that the pointer of the fuel gauge swings under the mountain can not be used normally, the reason for this problem may be that our oil volume does not meet the requirements, that is, the oil is too little.

3. Problems with indicator lights.

In addition to the oil itself or system problems, our indicator lights may also be used for a long time due to poor contact or aging reasons, causing the oil pressure indicator to light up when the car accelerates.

2. How to deal with the oil pressure indicator light when the car accelerates?

1. Check the problem of the indicator light.

After a long period of use, our indicator light may have aging or poor contact reasons, so when our indicator light is on, we first have to check whether there is a problem with the indicator light.

2. Change the oil.

If we use inferior engine oil, it may make our indicator light on, if we encounter this problem, we must change the oil in time to ensure the normal use of our car.

3. Clean the filter.

If the filter of our oil system is clogged due to various reasons, and our oil pressure indicator lights up, we need to check and clean our oil filter in time.

3. How to prevent the problem of the oil pressure indicator lighting up when the car accelerates?

1. Maintain the oil system regularly.

The oil system is prone to aging and failure after a long period of use, so we should check and maintain the oil system regularly. Such as cleaning the filter and so on.

2. Always check whether the engine oil is sufficient.

If there is a shortage of oil, it may cause our indicator light to illuminate, so we should always check and add it.

3. Use qualified engine oil.

When we choose to buy engine oil, we should not buy inferior engine oil for the sake of cheapness, we should buy qualified engine oil through legitimate channels to ensure the normal use of our indicator light.

It is also very likely that the oil pressure is intermittent, a gas lamp will be on, that is caused by no pressure of the oil, first clean the oil Lei, if the problem can not be solved, then only the oil pan is uncovered, first tighten the large tile screws, and then open the valve cover to see if the tappet, tappet, oil hole screw falls off.

See if there is a shortage of engine oil [If there is a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

First of all, the oil you change is not the right number, if the oil is fine, check the lubricating oil circuit pressure, the pressure is low, it may be a problem with the oil pump, if the pressure is normal, check whether there is a problem with the oil pressure sensor. If there is no problem with the above checks, it is a false alarm of the oil alarm light.

If you don't refuel, the engine and the oil pump speed are slow, and the oil pressure is low, so if you don't refuel, there will be a red light, which is mainly the problem that the engine idle speed is too low, when you refuel, the engine speed will rise, and the oil pressure will come up, and the light will not be turned on means that the overall situation is still very good, this situation is very common, adjust the idle speed, and then observe the situation.

It may also be that the oil pressure sensor is faulty or there is a problem with the wiring, it is recommended to go to a professional repair shop and ask a technician to check to determine the cause.

The oil pump is not well oiled, or the oil pump filter is dirty, when the number of revolutions increases when refueling, the oil will be absorbed, so it will not light up, it is recommended that you go to the repair shop for maintenance, it is estimated that you will be asked to change the oil pump.

The oil pressure sensor is tied to the iron or the sensor itself, and the oil pressure and pump of the car are not very good at these two points, basically in the sensor area.

The motor fault light is on, the refueling is weak, the engine electrical equipment is faulty, you need to use the computer to see what the specific fault code is, and then targeted detection and maintenance, as soon as possible to detect and repair also has a certain guarantee for driving safety. Poor fuel quality can also cause the engine failure light to come on.

The engine fault light is to detect whether the exhaust emissions are normal through the sensor, when the standard is exceeded, there will be an engine warning light of the Luting Hall alarm, in most cases, after the lead slip this light is on, it will disappear after a while, then it means that there is no big problem, don't worry too much.

You can check the intake pressure sensor and clean the throttle for carbon deposits

1. Carbon deposition on the top of the air inlet and piston will lead to poor atomization, which will cause insufficient combustion and cause the lamp to be on;

2. Cold start, especially when the weather temperature drops sharply, due to the computer temperature correction problem, the start will lead to insufficient light, but as long as the temperature drops and does not fluctuate after the excitation is hidden to a certain temperature, the change will be relatively stable;

3. If the engine mileage is too long, the working characteristics of the spark plug will be weakened, which will cause the fault light to be on, so it is recommended to go to the maintenance shop for inspection.

There is nothing to do with changing the oil and the reminder light, the reminder light is to tell you to replace the maintenance, after the change, you must reset the maintenance lamp, some cars can use manual control reset, and some need the computer to modify the reset setting for the next maintenance mileage, your car is just to change the oil, and there is such a situation without doing the next step of maintenance to zero.

1. Under normal circumstances, the oil indicator of the ignition switch instrument should be on, and the oil indicator should be extinguished after the fire.

If the oil is normal, check whether the oil alarm switch and wiring are normal, if there is no problem with the above, it is best to go to the repair shop to check the engine and oil pump problems.

2. After the engine starts, the generator and the oil pump start to work, at this time the generator has begun to generate electricity, and the oil pump works to make the oil reach a certain pressure to meet the needs of the engine, so the two alarm lights will go out, which means that the system is running normally.

If the engine has been started and the alarm light is still on, it means that the power generation part of the car is faulty or there is a problem with the oil pressure, and the engine needs to be turned off and then the car is tested (mainly the oil part, if the engine continues to work in the oil pressure alarm state, it may cause serious damage to the engine).

If the car's engine oil supplement light is lit for a short time, this is normal, because after the car turns on the ignition switch, the engine is undergoing self-inspection, and the owner only needs to wait for the vehicle to start normally, the engine will work normally, and the signal of insufficient oil will disappear.

When you find that the engine fuel replenishment indicator light of the car is on, you should immediately check it in the 4S shop and should not continue driving, otherwise the engine loss of the car will further increase, and in serious cases, it will cause irreversible harm to the engine itself.

The engine failure light is on and has nothing to do with the car's fuel tank. Appear.

All cars have a trip computer, and the trip computer will automatically detect the car.

Various faults of the car and light up the corresponding indicator lights to remind the driver, in the process of this self-inspection there is a certain false alarm rate. You can.

Drive the car to 4s o'clock to check it in detail, if there is no problem, people will eliminate the fault code on the driving computer, you can rest assured. Drive.

Hello, this should be a problem with your car's circuit board. Go to a repair shop for circuit testing and you can fix it.

It is estimated that the quality of the oil you added last time was not good, resulting in carbon deposits. I re-added the oil of the quality number and neutralized it.

It should be the sensor that is triggered, specifically to read the data stream.

Hello! It may be that there is a shortage of oil, and the oil level is too low to easily cause flameout.