How do I convert an article into an editable document after scanning it into a TIF file through a sc

Only the ready-made TIF file can be imported into the "Shangshu" text recognition software for recognition;

If you can identify it while scanning, you can do it directly in the "Shangshu", which is more convenient and eliminates the intermediate steps.

I have been using Shangshu No. 6, the recognition rate is very high, and it also supports the recognition of ** Chinese characters.

You can use the built-in software of Word2003's Office Document Imaging, but the accuracy rate is only 80

Recognize software with words. For example, the "Shangshu" series.

After putting the document in the scanner, it can be scanned between the books and the inside to be recognized.

After recognition, it can be saved as a document.

Tsinghua Unigroup's OCR text recognition software can be used to recognize and convert it into a TXT file.

It can be done with PageMaker software. TIF format is supported.

The specific steps to convert the scanned file into a ready word document are as follows:

The materials we need to prepare are: computer, OCR text recognition.

1. First of all, we turn on OCR text recognition and click to open "Read file from scanner".

2. Then we click on the pop-up window to open the "Paper Analysis".

3. Then we click to open "Identify".

4. After that, we click and select "Save as Word".

Character recognition conversion software needs to be installed. I'm using Hanwang, you can try it too!

In your usual work and study life, once you encounter some words that need to be copied from the **, what do you usually do? If you are, dense text, you suggest you try to use software to help you quickly extract the text on the text, otherwise it is too troublesome to hit one by one, in fact, there are already a lot of **text recognition software on the mobile phone, the specific operation method is as follows:

Scan the file with the OCR software of the scanner, identify it as a TXT file, open it with Word and save it as. doc file.

Use the scanner,When the file is scanned,Set it to ** format,When the scanning ends, an exe format text will be formed,The text is the recognized text,Copy the text into the word on it,But the accuracy of the text in the exe text depends on the clarity of your original file,Some are very good,Some are slightly worse。

You can use special recognition software to identify, Tsinghua Unisplendour has it, you can go to the ** to take a look, the recognition rate is still quite high.

It must be recognized by OCR type text recognition software (or built-in software) before it can be soft-replaced with a word file (each character symbol recognized by the computer). Commonly used OCR software includes "Hanwang", "Unisplendour", "Jiesu" and so on. The higher the clarity, the higher the recognition rate of the typography specification.

It is called a powerful tool for converting image files (non-can) into documents (can).

Extremely efficient. After opening the OCR software, select "Your Scanner" for the image, and you can directly start the scan from the scan, select: Scan into a document. After the scanning is completed, click "Recognize", and you can see the text recognized by the software. Just keep it as a typeset version.

Sweeping it out is an image, not allowed.

Just like why e-books are divided into electronic and scanned versions, this is the reason.

First method:

1. Save ** asTIFF format (if it is another format, open it with Paint in Office2003 and save it as *.)TIFF format);

2. Open the ** file with Office Document Imaging in Office2003 tools, hold down the left mouse button and drag to select the file area to be converted;

3. Click "Tools" in the toolbar, select the text "Use OCR to recognize text" in the tool menu, click OK, and select the style with blue highlighting after the recognition is completed;

4. Then select "Send Text to Word" in the toolbar, select the storage location, click OK, and then proofread it.

The second method:

The specific operation process is as follows:

1. First of all, you must have a jpg or bmp format ** (**, of course, there must be text in it).

2. Double-click to open the ** (here as an example). In the File menu, save asTIF format. The file name is saved.

3. Then use Microsoft Office Documen Imaging software to open this format file. (Method: Right-click and select Open With and click Microsoft Office Documen Imaging).

4. After opening, open the tool menu and click "Send text to word.......Item.

5. At this time, a dialog box will pop up, click the "Browse" button to save the converted file to the specified location. Then click the "OK" button to pop up the dialog box, and then click OK to pop up the progress bar, and when the progress is finished, the desired word document will pop up.

OCR text recognition software can be used, for example:

But there will always be a little mistake in software recognition, and you need to check it yourself, especially when scanning the book, some formats, the software can not recognize and there may be garbled characters.

Save the scan ** in TIF format, open it in the OCR software, and then, command -> recognize, and you can do it.

You don't need to choose OCR recognition when scanning, as long as it is normal**.

There are quite a few mobile scanner apps, but most of them cost money. The only app I know of is one that is free and doesn't cost money, and it was highly recommended to me by an office boss.

Compared with other software of the same type and function, this app is practical, convenient and fast, the key point is that it is very suitable for office workers to use, and it is free, compared with Evernote, the same type of scanner is more convenient to use.

It can be converted with Microsoft Office Document Imaging.

1. Insert all the ** into the word, there is a Microsoft Office Document Imaging Writer that comes with Word to print, and the printer name of the file "Print" is selected to print Microsoft Office Document Imaging Writer into TIF format.

2. Or you can use Adobe Acrobat Professional to merge ** into PDF format first, and save the document as TIF format in PDF.

Then use Microsoft Office Document Imaging to convert, use OCR to recognize text, and then convert text to Word with Tools.

The swept out file is in ** format and cannot be direct.

It can be converted with OCR software, such as Shangshu, or Microsoft Office Document Imaging that comes with Win

Dude, I guess you mean to put the text content scanned out by the scanner into word, right? It is recommended that you use Founder OCR text recognition software to scan and use it.

I also ran into this issue the other day, with"Shangshu No. 7 OCR"It's very easy to use, just identify it and copy it into word.

You can use relevant OCR recognition engines, such as Wentong OCR, Fujitsu's OCR, and Office2003's OCR. I have used Wintone OCR (SDK is provided, you need to declare it in VB), Fujitsu (COM component), etc.

Different engines come with different SDK documentation, so you should know how to use it after you take a look.

It can be scanned, when it is scanned, and then use the text recognition software ORC to recognize the text, and it can be converted into a word document.

ORC text recognition software has the following:

1. Microsoft Office Document Scanning Microsoft comes with Office tools.

2. Shangshu No. 7.

3. Tsinghua Unigroup.

Tsinghua th-ocr crack patch.

4. Crack the patch.

Scanned out is**,**The text on the ** also belongs to**,Can't convert the words one by one.,You can only build a word document.,Word by word.。 If the words on ** can be copied and glued to the word, then there is no profession of typist.

Step 2: Select the recognition effect and recognition format of the file above;

The above is all the ways to convert text to word document, I hope it can help you!

Scan the text, and the result is in ** format (.).bmp). It is then converted using the ORC recognition system and finally modified with Word. Here's how to use ORC:

OCR is the abbreviation of English optical character recognition, translated into Chinese is the meaning of text recognition through optical technology, which is an important aspect in the research and application field of automatic recognition technology. It is a software technology that can automatically recognize and input text into the computer, and is the main software supporting the scanner, which belongs to the category of non-keyboard input, and requires the image input device to be mainly matched by the scanner. Now OCR mainly refers to text recognition software, in 1996 Tsinghua Unigroup began to match Chinese recognition software, the market scanners and OCR software have been sold separately, professional OCR software roasted oyster hat.

The software can be used directly and does not require installation.

Web Links.

The scanned file to Word document can only be done through a converter.