The meter is not broken, the pipes are not leaking, but the meter readings are not normal

Is it a new watch that you just replaced? This kind of meter is very sensitive, upstairs with water downstairs meter will run, very pitiful, I advise you to go to the water meter verification station to verify the water meter, without the water company personnel accompanied, go to the water meter do not say that the water meter is fast, just say that you want to see if this meter is allowed to use. After the appraisal is completed, be sure to let them issue a legal test report!!

If you say that the meter is fast, they will say that the meter is fine, and the water company and the inspection station are all in the same boat.

When it is determined that it is not a problem with the water meter, it is possible that there is gas in the pipe, and it is added in front of the water meter (water meter inlet).

A check valve is sufficient.

It is recommended to use the latter first, a check valve (check valve) is only a few dollars, the cost is low and the effect is fast; If you go to verify the water meter, you may have to spend a lot of verification fees, and if you issue a report, you will have to pay more than 20 yuan.

The gas in the pipeline is not always photographed, and because the pressure of the pipeline is not a stable and constant value, it is constantly changing, so that the compressibility of gas is many times stronger than that of water (you should be able to figure it out here, right?). When the pressure in the water supply pipeline increases, the gas in the pipe behind the water meter is compressed and the volume is reduced, so there will be water flowing into the pipe behind the meter through the water meter, and the water meter will of course move; When the pressure is reduced, the water flows back to the water supply line through the meter, but most of the time the meter does not move when the water flows back. Then the meter will keep going.

1) Identify the quality of the water meter yourself, open the faucet to put water into the bucket, release 50 kg of water, the water meter reading should increase by 50L (because the density of water is 1 kg cubic decimeter), you can do several more tests.

2) If there is no problem with the water meter, it may be that the water transmission line is broken.

3) It could also be that someone is stealing your water.

Summary. What is the reason why there is water in the water meter but there is no water?

Hello dear, there are two reasons why the water meter has water but does not come out of the water: 1. After the water meter is used for a period of time, sometimes there are small sand particles stuck, and the ball valve will automatically close and the water will not be watered, and the property will be told to remove the water meter with a pipe wrench by the hydraulic engineer, and then use the management card to brush it again in the card swiping area, the ball valve will be automatically opened, and the water flow will be smooth;

2. The water meter has been used for a long time, and the battery in the smart water meter has run out, and the water will not come out, so the battery needs to be replaced.

What is the reason why there is water in the water meter but there is no water?

What is the reason why the water meter has water but does not come out of the water, there are two reasons for the water meter to have water but not water: 1. After the water meter is used for a period of time, sometimes there are small sand particles stuck, and the ball valve will automatically close and not produce water, and inform the property that the water meter will be removed with a pipe wrench by the plumber, and then re-brush it in the card area with the management card, the ball valve will be automatically opened, and the water flow will be smooth; 2. The water meter has been used for a long time, and the battery in the smart water meter has run out, and the water will not come out, so the battery needs to be replaced. Hope it helps.

If my answer is helpful to you, please give a thumbs up (in the lower left corner), I look forward to your like, your efforts are very important to me, and your support is also the motivation for my progress. Finally, I wish you good health and a good mood!

There is no one living in the house and there is no water leakage, why did the water meter go 300 tons? In this case, it seems that there is no sign of water leakage on the walls and floors of your house, so whether the residents downstairs have this problem, and check whether there is a faucet that is not closed tightly (such as the toilet has been running or the faucet of the mop pool is not turned off, etc.), if not, you can be sure that the pipe is fine. There is a chance that the water meter will be broken, but the probability is very small.

It is recommended to close all the valves at home tightly and then look at the degree of the water meter, if you don't go, it means that there is a faucet or the valve is not closed tightly. If you are still walking, you should call the professionals of the water company to overhaul it. Not bad, I hope you do.

There is no leakage, the water meter is gone. A lot. When you encounter a problem, you must learn to observe and observe whether your water meter can go without using water.

If you walk, go fast, or slowly, or walk in bursts. These conditions are common to different faults. If you go fast, there must be a leak.

Walking slowly and evenly is also a place where there is a rise. The speed is not wide, and it is abnormal to go for a while, and it is necessary to check whether the check valve at the water meter is abnormal.

There is no water leakage at home, and the water meter is not broken, why is there a lot more water meters? I don't think there is a leak in the house, the water meter is not broken, the number of water meters has gone a lot, it may be that you have used more water this month. Therefore, the number of water meters will go more.

First of all, you can check whether the water meter is normal, if you turn off all the water in the home, the water meter is still moving, it means that the water meter is broken and needs to be replaced and repaired; Secondly, look at whether the faucet at home is leaking, and if the faucet is leaking, it needs to be replaced; Finally, if it is not for the above reasons, you can contact the water company for treatment.

Water Conservation Tips for Living:

1. First of all, when washing rice and vegetables, or washing hair and washing hands, use a basin with water to wash, do not rinse directly with the faucet, which can save a lot of water.

2. Secondly, when cleaning the tableware after eating, you can first wipe the oil stains on the tableware with a paper towel, then wash it with hot water, and finally rinse it with water.

3. Don't pour out the water for washing rice, you can leave it down to wash your face or water your flowers. It not only saves water, but also plays a good role in **. In addition, when taking a bath, you can stand in the basin to wash, so that the bath water can be used to flush the toilet or mop the floor.

4. For friends who have a car, when washing the car by themselves, it is best to use a bucket of water to wash the car, or use the washing water after washing the clothes to clean, or you can use a water-saving spray water gun to wash the car to achieve the effect of saving water.

5. Finally, the toilet at home is used frequently every day, so the amount of water that needs to be used is also a lot, if you want to reduce the amount of water in the toilet each flush, you can put a 500ml water bottle in the toilet tank to achieve a water-saving effect.

Summary. Pro, the water meter is normal and there is no leakage The abnormal water bill is due to the following reasons:

1. First of all, you can identify the quality of the water meter by yourself, open the faucet to release water into the bucket, release 50 kg of water, and the water meter should be increased by 50L (because the density of water is 1 kg cubic decimeter), and you can do several more tests.

2) If there is no problem with the water meter, it may be that the water transmission line is broken.

3) It could also be that someone is stealing your water.

The water meter is normal and there is no leakage What is the reason for the abnormal water bill?

Pro, the water meter is normal and there is no leakage The abnormal water bill is due to the following reasons: 1. First of all, you can identify the quality of the water meter by yourself, open the faucet to release water into the bucket, release 50 kg of water, and the water meter should be increased by 50L (because the density of water is 1 kg cubic decimeter), and you can do several more tests. 2) If there is no problem with the water meter, it may be that the water transmission line is broken.

3) It could also be that someone is stealing your water.

If you suspect that there is a problem with the water meter, you can "go to the water company to inquire and ask to see if the water meter is broken or the water pipe is leaking, if you suspect that there is a problem with the water meter, you can replace the water meter, and go to the Quality Supervision Bureau to apply for inspection of whether the water meter is qualified." "How to check the details of the water bill on the mobile phone, and the specific method of checking the water bill on the mobile phone: 1. Open the WeChat page and click [Me] - [Payment].

5. You can see the balance and pay the fee.

There are also the following reasons: first of all, you can check whether the water meter is normal, if you turn off all the water in your home, the water meter is still moving, it means that the water meter is broken and needs to be replaced and repaired; Secondly, look at whether the faucet at home is leaking, and if the faucet is leaking, it needs to be replaced; Finally, if it is not for the above reasons, you can contact the water company for treatment.

There is also the possibility of water leakage if the water meter does not turn, because every once in a while a drop of water, the water meter is not rotating or can not be seen, so if the gate is closed, it will not leak, and the water will leak when it is opened, which proves that there is a problem with your water pipe, and it must be solved, otherwise the losses caused downstairs are to be compensated by you.

Related Notes:Because the stability and durability of the water meter under the common flow rate are the best, it is more in line with the design requirements. If there is a margin for the water pipe considering the future water flow capacity, the water meter can be selected one level lower in the diameter specification.

If the pipe with a diameter of 200mm is insufficient due to the flow rate, you can choose to install a water meter with a diameter of 150mm, and then change to a water meter of the same caliber when the flow rate increases to the normal flow of the pipeline of 200mm in the future. Large-scale water-consuming industrial users can choose a larger-caliber water meter when selecting water meters, or they can use several relatively small-diameter water meters in parallel, so that they can also repair or replace individual faulty water meters without affecting the normal water supply of users.

First, the water meter does not turn is also the possibility of water leakage, if there is a leak at the front end of the water meter, the water meter will not turn.

2. How to check for tap water leaks at home.

Unscrew all the outlet angle valves at home, and then seal each outlet with the plug of the foot sealing material PTFE belt (commonly known as raw material belt), and close the household control total water supply valve switch (it must be closed tightly, otherwise the data is inaccurate, such as the total valve seepage will be treated in another way), and finally connect the pressure test pump to test the pressure work, and the air in the water pipe must be drained clean when the pressure is tested (as long as the water outlet at the high level can be put for a while). In general, the acceptance of the home improvement waterway is: the pressure index is recommended to be no more than the pressure drop within 30 minutes of the pressure test, and at the same time check whether there is water leakage at each connection.

If you turn on the faucet drop by drop, the meter won't turn. It is estimated that it is not a sewer leak in your house, because if it is a sewer problem, then the main valve will still leak if it is turned off, and it will not stop until the sewer water is completely leaked. If the valve is closed, it will not leak, which means that it is a problem with the water inlet pipe, and there are two possibilities, one is that the water pipe is not of good quality and has cracks; The second is that a water pipe joint is leaking, it is estimated that the joint made of pig iron material is used, and the thing will rust after a few years, so replace it with cooked copper.

The second option is more likely.

If the water meter does not turn, it is not a leak in the water pipe, it may be a leak in the sewer of your house, and as soon as your home uses water, the sewage will flow down the sewer to the downstairs.

It is the water pipe leakage in your home, the flow rate when the water leakage is very small, you are basically a rotor water meter, it has a minimum flow rate, the flow rate does not reach the water meter will not turn, many faucets are small to steal water is used this principle.

The demarcation point of responsibility is demarcated by the water meter, and if there is a problem between your water meter and your household water point, the responsibility lies with your home, whether it is above ground or underground. If there is a problem with the underground pipeline between the main valve of the two houses and the main valve of your home, the responsibility is not in your home. Responsibility may lie with the water utility or the common premises of each owner.

There may be water seepage in the area of your home that has stagnant water. For example, a leaking toilet tank or a leaking water heater.

If you just turn off the water meter for an hour or two, you can't see any problems.

Stress testing can be done to determine the root cause of the problem.

If the water meter does not turn, it means that your home is not leaking.

There is water in the water meter, but the reasons for not producing water may be: 1. The valve before the water meter inlet is not opened, and the valve can be opened manually. 2. If there is a problem with the water meter, you can find someone to repair it.

3. There is a problem with the water pipe, it may be blocked, or the valve of a water pipe is closed, and so on.

If there is a problem with the water meter or water pipe, you must ask the staff of the water company to repair it in time, so as not to affect the daily life of the water.

When the water consumption is lower than the preset water consumption, the smart IC card water meter has the function of closing the valve if the margin is insufficient, and then there will be water in the water meter, but the water cannot be released.

You can also check whether the filter is blocked, if there is a foreign object, clean the filter of the faucet, and try whether the water is normal after installation.

Operating environment

Brand model: general

System Version: Universal Laughter

Generally speaking, the phenomenon that the water meter does not go out of the word indicates that it may be damaged and needs to be repaired or replaced in time, otherwise it will affect the normal payment. To replace the water meter, you need to let the water company arrange professional staff to operate and replace it, and you can't replace it yourself to prevent damage to the pipe.

The water meter is a meter for measuring the flow of water, most of which is the cumulative flow measurement of water, and is generally divided into two categories: volumetric bright water meter and speed water meter. Water meters originated in the United Kingdom and have a history of nearly 200 years.

When choosing a water meter size, you should first estimate the size and range of flow rates that would normally be used, and then choose the type of meter that is most close to that value as the first choice.

When reading the water meter, it is necessary to read it from the high pointer to the low position, that is, from the 1000 pointer value indicator plate clockwise from bottom to top.