I have a router that can send wireless network, there is a network cable, how do I get the router to

Don't plug in the network cable from the public route. Connect your computer to the LAN port of your router, open the browser, enter in the address bar, and a router login interface will come out, enter the username and password, the default is admin, and you will enter the router's settings interface.

1. Click Parameter Settings in the left menu, and click LAN port settings. Change the displayed LAN port address to: Save. (If it doesn't work, change it to, as long as the first two paragraphs are the same).

2. Click on the WAN port settings, and the connection type or something will appear in it. Change the connection type to dynamic IP.

3. Click DHCP server, click Enable, and save.

4. After you modify the LAN port address of the router to the above method, enter your router settings in the address bar. Then set the password in the wireless parameters or something.

5. After everything is set up, turn off your router first, and then plug the network cable from the public router into the WAN port of your router. Then turn on your router and your router should be working fine.

The most critical step here is to change the IP address of your router's LAN port. If you don't change it, the IP address of your router is the same as the IP address of the public route, which will cause IP address conflicts, and your router will not be able to connect to the Internet. This is called the cascade of routers.

If you still don't understand, go to the Internet and search for the detailed tutorial to see.

What about the manual of your new router? And didn't the newly bought router have a piece of paper on it? Write out the router password and user name, as well as your router model, you say a model, most of the current router usernames are admin, the password is either admin, or blank (no need to lose anything), if the above two are not, it means that it has been changed before, you just need to restore the router again, take something and grab the small hole (about 5,6 seconds), remember to plug in the power supply!

Then try to enter those two passwords, and you're advanced to what the router is saying.

Connect the output port of the cat to the input port of the router, and then use the input port of the router to connect to the computer.

Open the routing setting interface on the computer, it seems that it is generally or, the username and password admin, and then use the shortcut setting function to operate according to the prompts.

Go to the router, turn on the wireless function, and preferably set a password.

The username and password are admin by default If you enter it incorrectly and don't know the current password, reset the router.

Set up the second router as a bridge.

Wired or wireless, wireless needs to be bridged, watch the tutorial.

The function of a wireless router is to send wired signals and provide them to mobile phones, tablets and other devices. Just install the wireless router normally.

How to set up wifi:

1. The router is plugged in, and the network cable that enters the home is plugged into the WAN port of the router;

2. Connect the computer and the router with another network cable (plug one end into any LAN port of the router, and plug the other end into the computer);

3. After opening the computer browser, enter the IP of the router in the address bar (there is one in the manual, press enter;

4. Enter the username and password of the router, generally the initial username and password are admin (can be found in the manual).

5. Click "Setup Wizard" and click "Next";

6. Select PPPoE (ADSL Virtual Dialing) and click Next.

7. Enter the Internet account and Internet password (that is, the network user name and password written in the contract of the network and operator), and click "Next";

8. Select "WPA-PSK WPA2-PSK", enter the password and click "Next" (this password is the WiFi password);

9. After the router is set up, click "Finish".

1.Enter the IP address of the router in IE, such as: , and then enter the initial user and password: admin admin (general) If the password and user name are incorrect, please enter according to the password in the actual manual).

2.Go to the wireless settings and turn on the non-function.

3.Set a wireless routing password.

Follow the above steps to set up OK.

Yes. It's OK to turn on the wireless function on the router.

Imitation operation is probably fine. The condition is that the first router is functioning normally, with the DHCP feature enabled.

The second router is a wireless switch function, which does not enable the DHCP function, and the WAN port is empty and not plugged into the network cable.

It's a wireless router that does. Mini portable wireless routers are the most common because they are easy to carry.

Now I know that the new broadband at home can use the wireless network without buying a router, just set it up.

You just need to change the routing gateway to be added, plug the network cable into the WAN port, and this router can access the Internet, and both wireless and wired can be used

Here's how to set up your router:

1. One end of the network cable is connected to any LAN port of the sub-router, and the other end is connected to the computer.

2. Change the LAN port IP of the login interface through the computer browser to avoid conflicts with the IP segment of the main router;

3. Select the WAN port Internet access mode: dynamic IP connection, and enable the DHCP server.

4. Set up the account and key wirelessly, save and log out.

5. Connect a network cable from any LAN port of the main router to the WAN port of the secondary wireless router, and the computer can access the Internet at this time.

Prepare two network cables (the first one you have ready, which is the one that goes through the "modem").

The second is to buy a network cable sent by the router, if you don't send it, you have to make a network cable with crystal heads at both ends. ）

1.Change the local connection to automatically obtain the IP address.

2.The network cable from the "modem" (modem) is connected to the "wan" port on the router, and the router's ports 1, 2, 3, and 4 are connected to the network cable port behind the computer host.

3.Open the browser and enter the password and username of the router are admin

4.Go to the router settings screen, select the PPPoE (ADSL virtual dialing) method, enter your home account and password, and confirm.

5.Then set the SSID, encryption method, and password. Save, restart.

6.In the end, the setup is considered successful.

Hello, route settingsYou can set it up by following the steps below!

1. Connect the home network cable to the WAN port of the router, 2. Connect your computer with another network cable at one end, and connect your routing LAN port at the other end, (the LAN port is the interface marked on the route!) ）

3. Open the computer, open the browser, enter the routing login IP in the address bar, 4. Enter the routing login account and password in the pop-up dialog box, friendly reminder, if you don't know the routing login IP, login account and password.

code, you can turn the route over and look at it, and there is a writing on the back of the route!

5. After entering the routing setting interface, the quick setting interface will generally pop up, and you can select the broadband dialing method in this interface.

PPPoE, enter your Internet account and password!

6. After the settings are completed, save the exit and restart the route!

Once the routing restart is complete, your routing hardware connection and setup are complete!

In addition, there is another point to remind that if your home is a ** line and there is a cat, it is recommended that you turn off the power of the cat when you set the route, and when the route is set up, turn on the power of the cat!

With the account name and password, you can follow the steps of setting up the Internet on the router as follows

You go and buy a wireless router, and then you connect the wireless router you just bought on your computer, enter the password and you can connect to the wireless Internet.

Is the router a wireless router?

If so, connect the broadband to the WAN port, connect the network cable to the computer, and then go into the router to set up wireless.

First of all, set up a wireless router to keep the network open.

If there is a LAN port behind the wireless router, you can directly connect the network cable to the computer to enjoy the wired connection to the network.

The mini wireless router is fixed in the wireless coverage range of router A, the outside of the router is adjusted to wireless routing mode, plugged in, and so on after the router is powered on and works normally, the computer searches for the default wireless broadcast of router B (it can be connected directly if it is not encrypted) Use the default address as if it is logging in to the router settings page in the browser, the router wireless function here turns on the WDS function and scans the wireless broadcast, and selects the same encryption method after scanning to the wireless broadcast of router A, Wireless channel and enter the wireless password of access A, save, and then set the wireless function of router B (SSID name, WPA2-PSK encryption and enter your own wireless access password), and save. You also need to turn off the DHCP function of router B, save it, and restart the router after saving.

After the router is started normally, the laptop wireless network scans the SSID broadcast of router B and enters the wireless access password to access router B, try to see if it can access the Internet, if it can, then find the root network cable to connect the desktop network card and the LAN port of router B, and you can also access the Internet.

Because you don't have management rights over Router A, you can't fix Router A's channel, so if Router A's channel is automatically changed, you have to scan and set it again in Router B's WDS.

That's basically it.

In addition, you have to figure out the principle of router A prohibiting wired connection, whether the MAC address filtering function is turned on or the router turns off the DHCP function and does not assign addresses, or some other reason, otherwise it is very likely that it will not be able to bridge up.

You connect the LAN port of A to the LAN port of B, and connect the other LAN port of B to D, and D can access the Internet. Because the LAN port of the home router is equivalent to a bridge, to put it bluntly, it is a switch.

1. The network cable must be connected.

2. Connect the wireless receiving module to D.

Connect B to the external network and then make another network cable to connect A... A is connecting D with a network cable

Mobile phone road buried by the device to set up wireless network method:

Mobile phone login router side slow liquid transport method:

4. Pop up the router login interface and enter the default login username of the router: admin and password: admin (if it is incorrect, look at the back of the router).

How to set up a router on your phone:

1. In the [Setup Wizard], select [PPPoe Dialing] (some are ADSL Dialing), enter the Internet user name and password according to the prompts, and save.

2. In [Network Parameters] --WAN Settings], select [Normal Mode] for Sprambling Beam, and select [PPPoe Dialing] in the three options of [Connection]. The next step is to select [Auto Connect], Save, and Exit.

The network cable is connected to the wired router, and the wired router is connected to the wireless router.

Router to wireless router, the second router (wireless router) setup, there are two ways (provided that the first router is already set up):

The first method: dynamic IP mode (the first route is the primary route, and the second route is the slave route).

1. Plug in the router and do not connect the LAN port of the main router first, and reset the slave router (restore the factory);

2. Connect the computer from any LAN port of the router to enter the settings page;

3. Set according to the dynamic IP;

4. Then set the SSID, encryption method and password;

5. Save and restart;

6. After setting, connect the network cable from the LAN port of the main router to the WAN port from the router.

The second method: wireless AP mode.

1. Connect the computer to the LAN port of the router first, and change the IP address of the slave router. For example, most router addresses are, we just need to change from router IP address to that;

2. Turn off the DHCP function from the router in the settings;

3. Finally, connect the network cable from the main router to the LAN port of the slave router (any one is fine), note that it cannot be the WAN port.

The main thing is to set up router 2 (your room), the configuration of router 1 remains unchanged, and then the LAN IP address of router 2 must be in the same network segment as the LAN IP of router 1, there are a total of 4 groups of numbers, the first three groups are the same, and the last group is different, and the WDS of router 2 must be turned on, and DHCP can be turned off.

This is just a reference, but it's pretty much the same.

Plug the line of the second router into the LAN port of the first router, select Dynamic IP address connection as the connection mode, and then enter the public IP address into the second router.

If your two routes are wireless routes, you can use the wireless bridging function, and the wireless router I am using now is to steal other people's signals on the Internet, and use the wireless relay function!