How to connect Meituan speakers to wifi and how to connect to mobile phones

Method steps.

7 8 Step by Step Reading. Put in the roll paper.

Keep the printer powered off; Then connect the phone to Wi-Fi, set the Wi-Fi username and password in EasyLink, and verify that it must be accurate; (Commercial Wi-Fi is not available) long picture.

If it is Android, click Start to start the connection; Keep your phone from going black; After setting the username and password of the Apple phone, click Fast Mode, and a small hand-like icon will appear, keep the phone from going black.

See 1 image remaining.

At this time, turn on the printer, the printer is powered on, it will be accompanied by a dripping sound, a normal prompt, waiting for the connection.

The waiting time needs to be patient, the network is good, the connection is fast, the network is poor, the connection is slow, the time is long, the first is 3-15 minutes to wait; After connecting to the Internet, there will be a reminder of "Meituan Takeaway automatically takes orders, I wish you a prosperous business" and a small receipt with the printer's hardware ID written on it!

PS: The tick beep during the process and the prompt that the printer cannot connect to the router are normal.

Open the latest version of Meituan Takeaway Merchant in your mobile phone - print settings - add a printer - scan the barcode just printed, enter the verification code, and the binding is completed. Long picture.

After the binding is completed, you can print and test it, after binding the printer, you can't automatically take orders, you need to restart the printer, and automatic orders are turned on by default.

Select the prompt in the settings and click the link to see if it's okay haha.

If the stupid pin core belt digging speaker is an active speaker and has Bluetooth function, you can use the mobile phone Bluetooth connection. The connection method is like Dou Xian: 1. First of all, we must understand the preparations before the application of this active speaker, for example, see if it needs to be charged or not, how to turn on the speaker, and be familiar with how to operate.

2. Turn on the speaker first, and select the Bluetooth** function. 3. Then turn on the phone and turn on the Bluetooth function in the settings. 4. After the Bluetooth of the mobile phone is turned on, it will automatically search for the surrounding Bluetooth devices.

5. If the Bluetooth of the mobile phone has searched for your active speaker Bluetooth device, the speaker will make a "jingle bell" sound, or there is a "Bluetooth pairing successful" voice, which means that the Bluetooth of the mobile phone and the Bluetooth of the active speaker have been successfully connected. At this time, you can use the mobile phone **device**** file,The sound is emitted from the speaker,The volume key of the mobile phone can control the volume adjustment of the speaker。

4. Connect to WiFi, select WiFi and enter the password of WiFi.

Wireless speakers are divided into Bluetooth wireless speakers, wifi wireless speakers, wireless speakers, FM wireless speakers, but the mainstream wireless speakers are Bluetooth wireless speakers and wifi wireless speakers.

Bluetooth speaker connection mode. Step 1: Turn on the Bluetooth speaker, Step 2:

Press and hold the power button of the Bluetooth speaker until you know that the indicator light has changed (some indicators change from red to blue, and some are flashing constantly), and judge whether to turn on the Bluetooth transmitter of the Bluetooth speaker according to the guidance of different manuals. Step 3: Turn on the Bluetooth of your phone and search for the signal of the Bluetooth speaker, Step 4:

It's okay to connect the signal, after the first connection is successful, the next time as long as you turn on the speaker and the phone's Bluetooth, they will automatically pair.

WiFi speaker connection method: direct connection mode: turn on the wifi speaker, press and hold the power button to change the indicator to make sure the wifi module is turned on, and then turn on the mobile phone wlan to search for this signal and connect it.

Step 3: If the voice prompt connection is successful, you can use it, (if the prompt connection fails, please repeat the above steps, if it still doesn't work, please use the normal connection).

Step 4: Turn on the wifi signal of the mobile phone WLAN search speaker, and you can use it after the connection is successful.

The input of the speaker can only be an audio signal, and it cannot be directly connected to wifi, and can only be realized through a smartphone, etc., and then passed.

The phone's audio output jack connects to the speaker's audio input.

0pp0 mobile phone how to connect to a rich speaker.

Preparation materials: one unlimited Bluetooth speaker, one smartphone.

The specific steps are as follows:

5. After clicking to complete, wait for 1 to 3 seconds, at this time, the system will send out a Bluetooth connected prompt sound, which means that the wireless Bluetooth speaker and the mobile phone have been successfully connected.

1. Prepare a Bluetooth speaker to ensure that the power is sufficient, press the power button on the top to turn it on, and wait for the mobile phone to match after turning it on.

It is not difficult to connect the Bluetooth speaker to the mobile phone, first make sure that the Bluetooth speaker has sufficient power and a mobile phone with Bluetooth function. 1. Bluetooth speaker boot; 2. Turn on Bluetooth in the phone settings, and the phone will automatically search for the Bluetooth device that has been turned on; 3. Find the name of your Bluetooth speaker (generally the name of the Bluetooth speaker can be found at the bottom of the device) Click to connect, and you're good to go.

Bluetooth wireless speakers? It's very simple,I use Rapoo's A300Bluetooth speaker,Turn on the speaker switch,Turn on Bluetooth on your phone,Search for the name of your speaker,Click to connect,You can connect it,It's not as troublesome as Bluetooth headphones。

The wireless Bluetooth speaker and mobile phone can be operated by following the following steps:

2. To make the wireless Bluetooth speaker in the power-on state, you need to press and hold the answer button of the wireless Bluetooth speaker.

3. Until the indicator light: blue light and red light flashes alternately and then releases.

4. At this time, the Bluetooth speaker and the mobile phone will enter the match.

After the mobile phone displays this Bluetooth speaker model device, click OK to connect and use.

1.The phone's Bluetooth and Bluetooth speakers are turned on.

2.Use your phone to find the Bluetooth speaker and connect it.

First of all, we need to press and hold the power button of the Bluetooth speaker to turn on the Bluetooth speaker. Open the [Bluetooth] option in [Settings] on your phone and turn on Bluetooth. Press and hold the pairing button at the audio department to turn on the pairing mode, then select the Bluetooth speaker in the Bluetooth list of the phone, and then wait for a while to pair successfully.

Here's a closer look:

1. Prepare a Bluetooth speaker to ensure that the power is sufficient, press the power button on the top to turn it on, and wait for the mobile phone to match after turning it on.

2. Turn on the Bluetooth switch of the mobile phone, and make sure that the Bluetooth of the mobile phone is visible, generally there will be a button marked next to the speaker as [pairing] This is the pairing key, press and hold this button until the status light flashes; Specifically, which button can be used to view the introduction of the manual;

Lezhuo C6 wireless bluetooth speaker, fashionable style, easy to carry, enjoy pleasure**, is a fashionable and novel style, durable fashion small speaker.

Sleeping on a mobile phone is to feel that the computer is motivated scholarship, everyone scholarship feels like sister, scholarship feels sister, scholarship feels sister.

2.Enter the current WiFi account password, pay attention to case sensitivity, if the WiFi password is entered incorrectly, it will cause the WiFi configuration to fail, and then click [Next].

3.Switch the network connection, find a hotspot from a printer starting with M on the wifi list page, and click the hotspot ,.. after the order

Meituan takeaway is a takeaway platform, merchants will need a takeaway automatic order receipt printer after entering Meituan, Meituan takeaway platform also has its own printer, but only docked with Meituan, but in reality, many businesses will open many takeaway platforms at the same time, at this time you need a printer that can print multiple takeaway platforms at the same time, today Xiaobaijun wants to share with you is a multi-platform takeaway automatic order printing with open API interface.

There is a problem with the server, we can solve it by specifying the IP address of the DNS server, open the Wi-Fi of the Apple phone, and click"i"symbol into the inside to modify, change the IP address of the DNS inside to or solve.

There's a Bluetooth connection in the merchant settings.

Enter the password and you can connect directly.

Synchronize your phone's data with your computer

First of all, you have to have an unlimited printer.

Female Boken Li Longji considered considering.

Your question is incomprehensible.

It's the inconvenience of you to make men and women inconvenient way to get a dad and a baga method v to send a father.

Keep the printer powered off; Then connect the phone to Wi-Fi, set the Wi-Fi username and password in EasyLink, and verify that it must be accurate; (Commercial Wi-Fi cannot be used) bvkcgjcc often every time.

How to connect your phone to a Bluetooth speaker setting:

Step 1: Turn on the Bluetooth speaker. The Bluetooth speaker of the speaker only needs to turn on the power switch of the speaker (other Bluetooth speakers need to broadcast the switch to the direction marked with the Bluetooth icon, until you hear two "beeps" or a voice prompt that the Bluetooth speaker has been turned on), and then the Bluetooth indicator light flashes, indicating that the Bluetooth has been turned on and has entered the searchable mode.

Step 3: Bluetooth connection. At this time, you will be prompted to enter the password,The password of the Bluetooth speaker of the speaker is:0000,The password of the Bluetooth speaker of the speaker will be automatically connected to the audio after entering,At the same time, the Bluetooth speaker will "beep"sound。