What is the fault of Haier XQG50 D709 washing machine displaying LOCK?

Prevent the child lock function of the washing machine program from being inadvertently changed by the child; To resolve the issue, press both buttons again to unlock.

The XQG50-BS808A has a child lock function to prevent children from inadvertently changing the washing machine program. Press the "Anti-Wrinkle Soaking" and "Reservation" buttons at the same time, the control panel automatically locks, and the display alternately displays "Lock" and the remaining time of the program. At this time, pressing any key is invalid, and the child lock function takes effect.

If you press these two buttons again, you're ready to unlock.

When the child lock function is activated, any other operating keys will temporarily lose their control function, thus avoiding the danger caused by mishandling by the child's curiosity.

If you need Haier XQG50-D709 washing machine manual, you can leave QQ or email to you.

Hello, thank you for asking the company.

Dear, the occurrence of the lock may be due to not meeting the door opening conditions set by the roller, usually caused by the following reasons: No.

1. The temperature in the drum is higher than 50 degrees.

2. The water level in the cylinder is not lower than the lower edge of the observation window.

3. The inner cylinder does not stop rotating completely.

Thank you for your interest.

You are welcome to ask the company questions again.

We wish you a happy work life

The door should be locked, you try to press the pause button first, then press and hold the button for 2 seconds, and the door will open, but only if the water does not exceed the lower edge of the outlet and the water temperature does not exceed 50 degrees.

The operating system is locked, which is an error operation.

Can you be more detailed? Will the water get into the lock, and is everything else normal? Like the drum of our little swan, if the door is locked, there will be a lock pattern on the display screen of the washing machine. From personal experience, I guess your washing machine should be fine.

The LOCF of Haier drum washing machine indicates locking, which will cause the washing machine to start protection when the user uses the washing machine incorrectly. Although the occurrence of LOCF will cause some trouble to use, as long as it is unlocked correctly and operated correctly, it is difficult for such problems to occur again. The occurrence of LOCF is a cause analysis.

1. Press and hold dehydration and appointment at the same time.

When the Haier drum automatic washing machine has LOCF, the user will face the embarrassment of not being able to wash. Even worse, they will wonder if there is a malfunction or damage. In fact, this is just the self-protection mechanism of the washing machine, the reason is that the user uses the washing mode incorrectly, so when the LOCF appears, the user can press and hold the two buttons of dehydration and reservation at the same time, and it can be successfully unlocked in about 3-5 seconds.

2. The temperature of hot water should not be too high.

There are many reasons for LOCF, such as wrong washing pattern, too much laundry, too high hot water temperature, etc. When using the hot water washing mode of the rolling automatic washing machine, it is best for the user to measure the water temperature first, about 40-50 degrees, and never directly put more than 70 degrees of hot water into it, which is likely to trigger emergency protection, and is not conducive to the service life of the washing machine.

3. Don't have too many clothes when drying.

Laundry drying is a necessary basic function of high-end washing machines, automatic drum washing machines will determine the time and quantity of laundry drying according to their own carrying capacity, users should understand, do not put too much laundry, resulting in LOCF in the washing machine.

lock means that the washing machine is locked, either the program, or the lid is locked?!

Summary. Dear, hello, I am glad to answer the Haier washing machine XQG70-1011 fault ** table.

Answer: Haier washing machine XQG70-1011 fault ** table is shown in the figure below.

Haier washing machine XQG70-1011 fault ** table.

Dear, hello, it is very good to call Chaoxing for you to solve the Zen late answer Haier washing machine XQG70-1011 fault ** table Answer: Haier laundry chain Li machine XQG70-1011 fault ** table see the figure below.

What is wrong with err1? There is also a burnt taste.

err1 what questions to answer; The washing machine shows a fault**err1 indicates that the door is not closed properly. Workaround: Re-close the door.

This failure occurred repeatedly when the door was closed several times.

After the power is turned on, no matter which mode, it can't be started, and there is an err1 fault in about 1 minute, the door lock should be able to lock, and the sudden short circuit circuit tripped during dehydration before!

Haier drum washing machine fault**err1 means: After the program is started, the washing machine door is still not closed or the door switch is damaged and cannot work properly. The program can be temporarily stopped, and the washing machine door should be automatically restored after the door is closed, or the door switch can be replaced.

Fault** refers to a phenomenon in which people tell that when using software and hardware, the software and molded hardware cannot operate normally.

Summary. Hello dear! I've seen your question and I'm trying to sort out the answer, and I'll get back to you in five minutes, so please wait a minute

Haier washing machine XQG70-1011 fault ** table.

Hello dear! I've seen your question and I'm trying to sort out the answer, and I'll get back to you in five minutes, so please wait a minute

Hello, happy to answer your <>

There are many fault codes of Haier washing machine Haier fully automatic washing machine failure**: F1: Haier washing machine water level sensor sensor is not in good contact; e1：

The Haier washing machine drains overtime, check whether the seepage drainage pipe is blocked; E2: The upper cover of Haier laundry cong machine is not properly covered;

E3: Haier washing machine is unbalanced in dehydration, shake the clothes again and spin them again; E4: When the water inlet of the Haier washing machine is overtimed, check whether the water inlet valve is closed and dirty; e5：

The water temperature of Haier washing machine exceeds 50 degrees; E6: Haier washing machine defense book whether to use high-foam laundry detergent Haier drum washing machine failure**. This answer applies to any Haier washing machine.

I hope the above is helpful to you If you are satisfied with me, please give a thumbs up Welcome to the consultation <> next time

err2 is what is the fault.

ERR2 is clogged filter, damaged drain pump, damaged drain pipe.

I hope the above is helpful to you If you are satisfied with me, please give a thumbs up Welcome to the consultation <> next time