Photography problem My camera and camera light are not in sync How to solve it High score bounty

1.My camera and lights are out of sync! How to solve it?

The easiest, most effective and most stable way to do this is to buy a synchronizer, a synchro-wire, a flash slot for the synchronizer, a small end for the synchronizer and a large end for the photographic light (main light).This way, any aperture is 100% synchronized with the shutter.

2.What do the numbers from 1 to 30 behind the photographic lamp mean?

The brightness and flash brightness of the light, if you try to turn on the light and adjust the value from 1 to 30, you will notice that the brightness increases significantly.

3.How much should I adjust the shutter speed of my Canon 350D?

The shutter speed and aperture used by any camera are adjusted by the shooting environment and the subject, and even the photographer's intention. Unless, of course, you're going to shoot a special scene, such as fireworks, and you'll have to decide on the speed first. In short, there are laws to follow.

PS: Although I am still a student, I have also been an assistant to a photographer for 3 years, and I have used a lot of models, and the 350D has been used recently. In professional photography, a wide range of options is essential for success, with at least 10 shots per shot being selected, one or two of which are selected for post-production.

Brother upstairs, you haven't used 350D, borrow a manual to see if it's a problem! Thanks for the first time!!

The highest flash sync of 350D is 1 200 !! The average old machine is 1 125 and you use the manual function to set the shutter of the camera to 1 200 with an aperture of f9-f13.

The number 1-30 behind the photographic light is the flash index of the flash, and the higher the number, the brighter the flash.

Be sure to use an electronic synchronizer, not flash sync, as the image will be shadowed.

1。You first borrow a light meter and measure the light, which will guide the adjustment of your studio lights and camera.

The highest flash sync was 1 200 seconds, compared to 1 60 1 125 seconds on the machines of the past, and 1 30 seconds.

As long as it is less than or equal to 1 200 seconds, it can be synchronized with the flash.

4。Buying a wireless flash trigger is convenient and machine-saving.

Whether your camera comes with an external flash, plus the external flash can be synchronized if there is no problem, if not, go buy a PHS (external flasher) photography and so on The number behind is the brightness of his output, the digital camera is generally at the speed of 125 when the aperture should be 8, but according to the adjustment of your sensitivity, there is a light output of the photographic lamp to determine, if you have any questions, you can find me.

Mine, please indicate your intention when you add me.

If you want to open a photo studio, the most practical thing is to buy an exogenous flash inducer, it is not practical to use a flash to do a flash, a flash is about dozens of yuan, the photographic lights have sensors, it is much more convenient than using a flash to light, the shutter is set to 125, the aperture is 11-16, the modeling light is turned on to half light and full light are test shots, if it is not synchronized, it is recommended to check the camera. Don't set the shutter speed too fast, the 350D flash sync is not high, just set it to 125.

Don't use the machine's flash.

Be sure to have a ceiling light.

It has to be good.

Try using TTL metering, it seems that the default is ADI metering, and the camera parameter options are there, it should be.

Landlord, first of all, you need to know how long your camera and flash are synchronized. Today's mid-range machines have a sync time of about 1,250 seconds. The highest camera sync time is around 1 300 seconds.

This means that when you're using the flash, your shutter time must not be lower than the sync time.

As for the way to see the synchronization time, you can try it this way.

1. Adjust the ISO and aperture.

2. Set the shutter time to 1 800 seconds or 1 1000 seconds.

3. Turn on the on-camera flash, or attach the flash to the camera.

4. Press the shutter.

5. Look back at how much the current shutter time has changed, that is the camera's flash synchronous shutter, as long as the shutter speed is not higher than the synchronous shutter speed, then there will be no flash out of sync, answered!

If you are satisfied, give a good review.