-
Anonymous users2024-02-100x0000008e is a hard drive setup problem or a virus that causes the hard drive boot partition error, and the memory is reinserted Try it.
-
Anonymous users2024-02-09Restart the computer to try, it still doesn't work, boot up and press f8 to don't move to the advanced option appears in the let go, select "the latest correct configuration" enter to repair, and press f8 to enter the safe mode to restore the system or reinstall the system.
If it still doesn't work, discharge the BIOS battery (restore the BIOS factory default) It is recommended to plug and unplug the graphics card and memory, clean it up, and polish the gold finger of the graphics card and memory.
-
Anonymous users2024-02-08It's time to redo the system! A problem has been found and the windows have been closed to prevent damage to your computer If this is the first time you see this stop error screen, restart your screen again, follow these steps: check to make sure you have enough disk drivers are sure to stop the message, disable the drive or check with the manufacturer for driver updates.
If you need to remove or disable components using Safe Mode, restart your computer, press F 8 to select Advanced Boot Options, and then select Safe Mode.
-
Anonymous users2024-02-07Hard drive self-test Most of the reason is that the computer shut down abnormally last time, it is recommended to let it detect it automatically.
-
Anonymous users2024-02-06Hello, there are too many types of this phenomenon, the main check objects are from primary to secondary: 1, from the installation system 2, take out the memory, clean it up, use the eraser to wipe the gold finger, clean up the motherboard slot. Or try another one. 3.
Test the hard disk, whether there are any bad sectors, I generally use, test the motherboard, this to take to a professional place to test.
General. It's a matter of 1 and 2. Good luck!
-
Anonymous users2024-02-05Is it prompted to self-test the disk every time I boot up?
If it is a disk self-test, the disk may have bad sectors, and if it is determined that there are no bad sectors, you can disable the boot disk self-test:
1. Disable the startup detection function in the registry regeidt hkey local machine system current
ccontrol
set→control→session
Boot to the right of the manger
The number of qualities in the execute is emptied.
2. D disk scanning and repair CHKDSK
fd: recommended).
3. Boot to skip D disk scanning: chkdsk
xd:
Locate the registry key you changed, right-click - "Permissions", and change the permissions of the users or groups involved to "Read" in the permission settings
The operating system has a self-protection function, yours belongs to an abnormal shutdown, the operating system will perform partition and file checks the next time you boot up, as for what you said every time, rest assured, just a few times, because sometimes he will scan partitions in batches, and this will happen in multiple partitions.
Is it a hardware conflict???
CHKDSK is a disk self-test program that comes with Windows, and this interface indicates that there are files on your hard disk that are corrupted. After this interface appears, you should not rush to turn it off, do not touch the computer, and let chkdsk run to finish. It usually runs out in 10 minutes. >>>More
The word moved can be interpreted as: 1. Shake. sense, through the "shock". >>>More