The new home is ready to be renovated, which locations can not cut corners? Otherwise, you will regr

Renovating a new home can be a hassle, although having a new home is a great joy. However, there are many things to pay attention to as a homeowner when decorating, and the decoration costs a lot of money, so some homeowners will be lazy or cut corners when decorating the new house. But this is very undesirable, and if you cut corners in some places, you will be very sorry after living in it in the future.

Some people may not think about it, but they will regret it when they actually live in a new house that cuts corners. Next, I will talk about the decoration of the new house where you can't cut corners, otherwise you will regret it very much.

Now I'm going to talk about the first place I regret cutting corners in renovation is painting the walls, because painting the walls requires painting. If the paint is not used well, then you will know how terrible it is when you move into a new house. Because bad paint contains very high levels of formaldehyde, and formaldehyde is something that can make people sick

So never cut corners when painting the walls.

The second decoration that I think should never cut corners is the decoration of the bathroom. Because if the restroom cuts corners, then there will be a lot of problems in the restroom. For example, the sewer is clogged or the water pipe of the faucet is not good, and the water cannot be discharged.

Once these situations appear, it will be maddening, so when decorating, you must not cut corners in the decoration of the bathroom, otherwise you will really regret it.

The above two are the places where I think we must not cut corners when decorating, and we must not feel that the so-called need to cut corners.

When we were decorating, we had to not cut corners in the living room and kitchen.

Hydropower pipeline lines, this has to pay special attention, after all, now the decoration is buried dark line, once there is a problem to pry up, equivalent to renovation, floor, if the floor is laid when cutting corners, the floor is prone to bulging, etc., there will be a hollow sound when stepping on the foot, the following is not smooth enough, the tile is easy to break.

When we were decorating, we had to pay attention to the living room and kitchen. After all, the decoration is now buried in the dark line, once there is a problem to pry up, it is equivalent to renovating again, and the loss is great. It is better to buy the materials yourself and then strictly supervise the work.

In the traditional decoration process, whether the wall decoration is painted with latex paint or tiled, the wall base treatment must be done. Otherwise, it will cause uneven wall surface, and there will be color difference after latex paint is painted; In the worst case, the latex paint will be discolored and cracked, or the paste will not fall off firmly. The treatment of the wall base is very troublesome, first of all, check the wall base layer, do basic cleaning of the old wall, brush the interface agent, leveling, anti-cracking treatment, and then brush putty for the final treatment.

Therefore, there will be a lot of cutting corners and trying to save trouble.

The decoration of the new house should consider all aspects, the kitchen and bathroom are the top priority, the water pipes and wires in these two places must be good, do a good job of waterproof measures, the main line of the kitchen and living room should ensure that all electrical appliances can withstand full opening, the cross-sectional area of the wire should be selected as much as possible than the calculated one level, and the air conditioner should be wired separately.

The waterproofing of the kitchen must be in place, there should be more sockets, and the wall should be waterproof, fireproof, and smoke-proof wall materials. There is also a sanitary sewer pipe can be a little larger to prevent blockage, the living room is best to make a socket on the floor, for the convenience of the coffee table, the socket in the room and the switch and so on need the main point, you can do more must not be less.

When the construction team was carrying out the renovation, they sometimes poured large amounts of cement, sand and concrete debris into the sewer in order to save trouble. The immediate consequence of this is severe blockage of the drains, causing the kitchen and bathroom to run out of water due to poor drainage. Although there are no problems in some projects at the time of final acceptance, there is always a problem of poor drainage.

When making joints such as wall paint, doors, and windows, it should be noted that if you do not use excessive tape, it will lead to potholes on both walls. The paint between latex paint and wood is mixed with each other, and various problems occur at the joints!

<> "Renovation works easily.

Something that cut corners.

1. Waterproof construction, generally the place to do waterproof is mainly the bathroom, if there is a sink washing machine on the balcony, you can also do waterproofing, the kitchen has a floor drain to do waterproofing, you don't have to do it. Bathroom waterproofing general delivery developer will do a layer, the basic quality of this layer is very poor, in the decoration to do the second waterproofing, some decoration workers in order to save trouble and save costs, will fool the owner that it has been done, and there will be a situation of tile hollowing off and leakage in the later stage. The correct way is to clean up the original waterproof layer and redo the waterproofing to avoid future troubles.

2. Hydropower construction, some decoration companies will use small-sized wires in order to reduce costs, and when you can wait for you to move in, there will be tripping at both ends in three days, so the owner will personally check the wires when choosing them.

3. In addition to paying attention to the wire itself, you should also pay attention to the most used conduit, the general decoration company will tell you that the PVC material can play the role of flame retardant insulation, but it should be noted that different brands, different quality and strength, the effect is also different. When we choose, we have to tell the decoration company, with the same brand and water pipe quality will not be too bad, if you are worried, you can test it on the spot, intercept a piece of line pipe, ignite it with fire, if it can continue to burn, this is resolutely not used, there will be potential safety hazards.

4. Bricklayer wall, is also easy to cut corners of the place, generally the wall should be added to the steel bar, and the steel bar is connected, so as to ensure that the later stage does not crack, some workers will not put the steel bar or simply put a few to deal with the matter, the later check-in wall problems, and then repair it is troublesome.

5. Woodworking ceiling, now the ceiling has a wooden keel and a steel keel, the advantage of the wooden keel is that the construction is simple, and you can do a variety of complex ceiling shapes, but the strength of the wood and the waterproof, waterproof and moisture-proof are not as good as the steel keel.

The steel keel construction is simple, strong and durable, but can not do too much modeling, and pay attention to the main keel spacing can not exceed 80 cm, the secondary keel spacing is 30 to 50 cm, some decoration workers in order to save materials, will make the spacing larger, it will affect the load-bearing of the ceiling, and the ceiling will be deformed and cracked in the later stage.

6. Wall construction, wall decoration Some companies will paint the wall with wall solid before painting, so that the whole house is yellow wall and green space, and they are very professional when they look beautiful. In fact, this kind of wall solid does not conclude that there is any benefit to the wall, but in the decoration construction, workers will add a large number of inferior glue to cut corners, there will be a large amount of formaldehyde and heavy metals in the glue, and then brush the latex paint to cover it, formaldehyde volatilization will be particularly slow, which will cause you to live in a toxic environment for a long time in the later stage.

These places that are easy to cut corners in decoration require us to pay attention to them when decorating to avoid unnecessary troubles in the later check-in.

The most common ones are wall painting, wall and floor tiles, joint decoration, wire joints, wire threads, etc., so homeowners need to pay more attention to these areas.

The first is backfilling, which often adds garbage to it when backfilling. The second is cement, which will be shoddy, and the third is the water and electricity pipelines, which cannot be seen after being buried.

The decoration team is easy to cut corners in the selection of materials and the mixing of materials when decorating, especially when decorating customers with easy to reduce the leftovers, which is particularly serious.

<> in the process of decoration, the most feared is that the construction unit is shoddy, cutting corners, if the owner does not know how to decorate.

Or if you don't pay attention, this can happen.

1. Small surface treatment.

The so-called "small noodles" are some small places that the owners cannot see with their eyes and do not pay much attention to, such as the upper edge of the door, the bottom of the window sill board, the inside of the heating hood and other places, where some workers will cut corners or even do nothing to deal with.

<>2 sewer pipes.

There are many homeowners who use their newly renovated houses within a few days to find that the sewer pipe is blocked, and then spend a lot of effort to unclog him.

This is caused by the fact that the decoration master is too lazy to pour the construction slag and uses the sewer as a garbage dump, so when accepting the house, be sure to test whether the sewer is unblocked with a large amount of clean water.

<>3 Wall substrate treatment.

For the interior wall decoration of the living room, the general latex paint needs to be painted more than twice to be qualified. If the workers are not serious or perfunctory in the construction, color difference often occurs, especially for darker latex paints.

Latex paint needs to be added with a certain amount of water before use, and the prepared latex paint should be used up at one time. It is also best to apply the same color paint in one go. If the wall needs to be repaired after the construction is completed, the entire wall should be repainted.

<>4 wire splices.

Electricians do not wire according to construction requirements when installing sockets, switches and lamps. Especially when the owner uses some electrical appliances with large power consumption, it is easy to cause the switch and socket to heat up or even burn, which brings great losses to consumers.

In the construction, supervise the electrician to carry out the construction in strict accordance with the operating procedures, and after all the switches and sockets are installed, they must be used to see if there is heat in these parts.

<>5 wall and floor tiles are paved.

When tiling, if the master is lazy and perfunctory, then your wall and floor tiles will definitely have a lot of hollow drums, and even uneven gaps, so try to look carefully when accepting, and knock each piece down.

6. Wall grooving.

Buried pipelines must be slotted in walls and ground in order to bury the pipelines. A small number of workers carried out the grooving operation in a brutal manner, which not only damaged the load-bearing structure of the building, but also caused damage to other pipelines in the vicinity.

Before construction, it is necessary to reconfirm the direction and location of the pipeline with the construction team leader. For different wall structures, the requirements for slotting are also different: the load-bearing wall in the house is not allowed to be slotted, and the wall with insulation layer is easy to cause cracking on the surface after slotting, and in the ground slotting, it is necessary to be careful not to damage the floor slab and cause trouble to the residents downstairs.

<>7 seam treatment.

From the delicacy of the joint treatment, you can see the sense of responsibility of the construction team. For example, at the junction between the door and the wall, when painting, it is generally necessary to paste tape on the edge of the contact between the door and the wall to ensure that the junction is still smooth and beautiful after painting. However, if the unscrupulous merchant omits the step of applying tape, there may be rough decoration with crooked corners, which will affect the appearance.

It's most likely to cut corners and paint latex when customizing cabinets, so we have to pay special attention to these two links.

All parts of the decoration process can cut corners, the ceiling single-layer double-layer gypsum board, putty, as well as the sliding door set door, the same type of board for custom furniture, ** is also very different.

It is most likely to cut corners in the sewer pipe, because the decorator may use the place where the sewer pipe is located as a waste discharge place, where construction waste is piled up, which will easily cause the sewer to be blocked.

Some waste residue and garbage in the construction process can easily be poured into the sewer by workers to save trouble, which is the work done by the most unconscionable people. Because of the sewers, once it clogs our later life, it will be very troublesome.

During the renovation process, he may cut corners for you if you don't pay attention to it. Take a look at the following points and get vaccinated in advance. The wall latex paint is not standardized, less than two times, which is equivalent to cutting corners and cutting materials.

For interior wall latex paint, generally we have to paint more than twice to be qualified, so if the worker is not serious in the construction process, in order to save trouble. Only paint it once, then our wall effect will be greatly discounted in the later stage.

Laziness and non-standard construction lead to poor sewer pipe blockage. Some waste residue and garbage during the construction process. It is easy for the workers to save trouble and pour it into the sewer, which is the work of the most unconscionable people.

Because of the sewers, once clogged in our later life, it will be very troublesome to check the method: after the construction of the waterway is completed, we have to fill all the basins, basins, and places where water is needed. Check that the water is clear.

Whether there is a leakage problem in each pipe. The indoor wiring is not standardized, which leads to later life and frequent tripping. Electricity is something we use every day, so some crews may not meet the requirements.

In order to save materials, the use of cheap wires for a wiring will cause some high-power appliances to trip during use. In the event of a failure during construction, you must carefully inspect the wire. Do not use bad, low-quality wires, otherwise it will often happen later, job-hopping.

The power is low and it is troublesome.

The tiles on the walls and floors are uneven. If the decorator cuts corners, it will cause the later tile hollowing. The joints are uneven, uneven, and after a long time, our tiles will crack and break, resulting in a personal safety risk.

The designer reminds that the wall and floor tiles should be paved flat, without dirt and cement traces. The surface is basically the same, the joints should be even, the tiles have no cracks, and the corners are dropped or missing, so they must be checked.

There is no plan for the buried pipes of the wire pipes. Messy our wires are generally buried pipelines. Then at the beginning, it must be horizontal and vertical.

Do not destroy the original wall structure. Do not break the surrounding wires either. Horizontal and vertical, do not mess around, otherwise it will be very troublesome to maintain later.