The household lamp is dirty, how to clean the lamp tactfully without removing it?

I've found that the lights in our house get very dirty after a while of use because of the dust and bugs sticking to them. When the lamp becomes dirty, not only will the lamp not look as good as it used to be, but it will also make the lamp less bright because of the dirt stuck to the tube. So we must pay attention to cleaning the lamp, but cleaning the lamp is a very troublesome thing, and many people will remove the lamp to clean it.

In the process of dismantling, it is easy to break the lamp, so we must master the method of cleaning the lamp without removing the lamp. Next, I will talk about some methods that I know can clean the lamp without removing it.

I'm going to say that the method requires the use of dish soap. We mix dish soap with warm water and put it in a small watering can. Then take a small bamboo skewer, wrap it around the small bamboo skewer with a strip of cloth, and prepare two more rags, so that the tools for cleaning the lamp are ready.

Before you start cleaning the lamp, be sure to turn off the electricity in your home, otherwise there is a high risk of electrocution while cleaning the lamp.

Then it's time to start cleaning the lamp, spraying the liquid on the dirt on the tube with a small watering can, and then waiting for a while to wipe the lamp with a rag. Don't use too much force and don't use too little force when wiping. There are some places that can't be wiped with a rag and can be wiped with a small toothpick.

After cleaning the lamp, wipe the water on the lamp with a dry rag to clean the lamp. AgainWhen using the lamp, make sure that there is no water on the lamp.

The above method is what I think is a very useful way to clean the lamp.

1. The simplest and most direct way to clean is to use a convenient ladder to climb up and carefully wipe the dust on the lamp with a rag.

2. To clean the crystal lamp beads, you need to use a soft cloth dipped in water diluted with detergent when cleaning, gently wipe the front and back of the crystal beads, and do not pinch the beads when wiping them down, otherwise it is easy to pull the lamp beads out.

3. When wiping the bracket accessories, the soft cloth must not be wet, especially not the alcohol water, so as to avoid damage to the protective film outside the electroplating layer, which will affect the gloss of the surface of the crystal lamp bracket accessories.

We can use a hair dryer to blow off the ash on it, or use a brush feather duster to rub and rub it constantly, and it will be clean.

It is dangerous to clean up without removing the lamp, only consider a dry rag to wipe off the stains, some mosquito contaminants cannot be cleaned up, it is recommended to remove and clean up, and wait for the lamp to dry and reinstall it.

Protective gloves without cotton wool to avoid hand sweat touching the quartz lamp during the cleaning process. Use a special alcohol-based cleaning pad to carefully and gently clean the surface of the lamp.

Wear insulated gloves, turn off the main power supply in the home, use a dry towel to wipe the lamp, do not use wet paper towels or wet towels to wipe the lamp, pay attention to safety.

You can use a brush brush, you don't need to dismantle it, you can climb it directly with a ladder, and it will be clean with a brush, which is how I use it

How to tactfully clean the lamp without removing it, we can use a hair dryer to blow off the ash on the bar, or use a brush to remove the floating dust on the Awa.

Turn off the electric switch for safety, and then use a dry brush, but this is not clean. It is recommended to remove it and clean it better.

Dirty lamps not only affect the appearance, but also affect the lighting, so the lamps and lanterns also need to be maintained, but how to clean the lamps, let's learn these tricks with me and you will not be afraid of dirty lamps.

Cleaning the room, people are easy to ignore the cleaning of the lamps, after a long time, the surface of the lampshade accumulates thick dust, not only affects the brightness of the room, but also affects the health of the occupants. Therefore, when you clean the room on the next trip, you may as well quietly bring the lamps and lanterns'Take a shower'bar.

In addition to the more complex chandeliers, the lamps and lampshades of ordinary families can be cleaned by themselves. Pour the diluted dish soap on the rag, and two people can work together to wipe the dust off the lamp. When cleaning the lampshade, the lampshade of different materials can be cleaned in different ways.

If it is a frosted glass lampshade, it can be removed and wiped with a soft cloth specially for cleaning glass, for stubborn stains, you can apply toothpaste to wipe it repeatedly, and you can also use a toothpick to dig out the dust in the face of the dead corner that the rag can't reach. The material is easy to generate static electricity, and it can also be sprayed with anti-static spray first.

It should be noted that it is best to choose to clean in the morning, so that after a day of drying, the lamps and lampshades are completely dry in the evening, which can prevent short circuits caused by moisture. The above is the introduction of "how to clean lamps and lanterns, learn these tricks and you will not be afraid of dirty lamps", do you understand? If you still want to know other related knowledge, you can learn about it on the No. 1 Home Network.

1. Turn off the daylight power supply;

2. After the rotation of the two ends of the old-fashioned fluorescent lamp with notches at 90 degrees, the double needles are pulled out from the notch, and the other end can be withdrawn.

3. The old electronic rectifier has no notch, is elastic, the right hand holds the right plastic head, the left hand holds the lamp and pushes it to the right about 1 cm, then the left side of the lamp needle comes out, and the left hand moves down to leave the lamp base, and the left hand pulls out the lamp tube in front of the left hand.

Fourth, if it is an aluminum alloy LED tube, if you want to disassemble the things inside, there are two Phillips screws at both ends, and you need to use a screwdriver to remove them. If you don't understand electronics, don't disassemble the LED tube.

Fifth, there are glass LED tubes on the market at present, which are disposable, and the two ends are stained with glue and thrown away, and there is no maintenance value. In order to avoid not being able to disassemble it, it may also hurt your hand.