How to set up Pioneer tire pressure monitoring and how to set up tire pressure monitoring

Tire pressure, strictly speaking, refers to the pressure of the air inside the tire. The tire pressure of different models is definitely different, so it is necessary to inflate according to the standard tire pressure of the vehicle.

1. Where is the tire pressure of the standard tire?

1. Vehicle user manual; 2. The label next to the cab door (near the B-pillar); 3. A drawer next to the driver's seat of the vehicle; 4. Small door of fuel tank cover.

Second, the impact of tire pressure on driving:

1. Tire pressure is too high: The friction and adhesion of the tire will be reduced, resulting in steering wheel vibration and deviation, which will reduce the comfort of driving; Accelerate the local wear of the tread pattern of the tire tread**, so that the tire life is lowered; The vibration of the body becomes larger; It will cause the tire cord to be subjected to excessive stretch deformation, and the elasticity of the carcass will decrease.

2. The tire pressure is too low: the friction coefficient with the road surface will increase, and the fuel consumption will increase; The steering wheel is very heavy, easy to deviate and other unfavorable safety; The amount of movement of all parts of the tire increases, and excessive rolling causes abnormal heating of the tire.

3. What is tire pressure related to?

1. Seasonal factors: Generally speaking, in winter, the standard air pressure is appropriately adjusted to about the principle; In summer, according to the lower limit of the standard air pressure of automobile tires, the car is parked in the open air in summer, which is 0 lower than the standard1 or so.

2. Loading load: no-load or half-load according to the lower limit of the automobile tire pressure standard; When fully loaded, the upper limit of the car tire pressure standard shall be applied.

3. Tire pressure measurement environment: the tire pressure of cool tires and hot tires is not the same, pay attention to the difference between the two when measuring.

4. Driving road conditions: the road surface with large bumps should be adjusted to reduce the tire pressure according to the standard air pressure of the automobile tire; The amplitude is small, can be ignored, do not care; Running long-distance and high-speed, the tire pressure should not be too low, and the tire pressure should be increased according to the lower limit of the standard air pressure of the automobile tire.

5. Tire condition: The tire pressure of the new tire can be adjusted by about bar according to the standard air pressure of the automobile tire; The old tire should be adjusted according to the tire pressure standard, and if the wear is serious, the lower limit of the tire pressure standard should be lowered;

Fourth, comprehensive. Abnormal tire pressure will lead to uneven wear of tires, reduce the comfort of driving, and be more related to the safety of driving, and may lead to punctures in serious cases.

Generally speaking, the tire pressure is left and right. In the summer, it is slightly lower. At full load, press the upper limit, otherwise, lower the upper limit.

In addition, because the front wheels support the engine for a long time, the tire pressure is slightly higher than that of the rear wheels. Because the spare tire is not commonly used, the air pressure should be higher, so as not to lose the emergency function due to low air pressure. Generally should be higher.

Adjust the tire pressure when you use it, and inflate it to a high tire pressure after use. In addition, the tire pressure of cool tires and hot tires is not the same, so you should pay attention to the measurement. The gap between the two is about the same.

If you have tire pressure monitoring, you generally don't need to set it up yourself.

In the case of Audi models, for example, when there is an abnormal condition of a tire, feedback is provided through the screen of the instrument cluster to inform the driver of the current condition and which tyre has a problem.

The early warning of tire pressure monitoring mostly occurs when the tire is flat, the tire is replaced, or the vehicle is under high load. But these situations don't necessarily mean that there is a problem with the tire, so how do we fix it?

1.Start by turning on the MMI system and selecting "Vehicle".

2.Select Tire Pressure Monitoring System in the first column.

3.The screen displays "After checking and correcting the air pressure of the four tires, please store the air pressure value." and select Store Tire Pressure.

4.The screen reads, "Is the current air pressure of the four tires in accordance with the specified value?" , and select Yes, Storage

At this time, it was successfully set up, and the tire pressure warning was lifted, so that the tire pressure monitoring was reset. The logic of the MMI system is very clear, allowing the user to complete the operation effortlessly.

Finally, a few caveats:

1.After confirming that there is no problem with the tire, it can be reset to avoid the existence of potential safety hazards caused by negligence.

2.The cause of the warning is not only air leakage, but also the deformation of the wheel hub.

3.If there are frequent early warnings, you should go to the after-sales service for further inspection.

First of all, the 4 tires must be hit to the standard tire pressure, then the engine is started, and the tire pressure is saved by pressing and holding the SET button until you hear a zd sound.

The Tiguan L is a passive tire pressure monitor, and the tire pressure cannot be displayed normally. Only the inner tire leakage and abnormal tire pressure will be detected and the light will be turned on to alarm, and the tire should be stopped to check the tire. If the tire is normal and there is no nail, press and hold the set button in front of the gear lever for six seconds to reset the alarm light, if it will also alarm, go directly to the tire repair shop to check, if it is determined that it is a false alarm and can not be reset, go to 4s to upgrade the tire pressure alarm program.

With the improvement of the quality of life, there are more and more vehicles on the road, and it is inevitable that all kinds of strange traffic accidents will occur. Driving safety has always been a concern for everyone.

Accidents caused by punctures.

According to some data, about 70% of traffic accidents are caused by flat tires. And the place where tire punctures are most likely to occur is the highway.

The cause of a traffic accident is a flat tire.

The car can drive safely because of the friction between the tires and the ground and the support of the tires. On the highway, once a tire bursts, it is not the first time that the car has been destroyed and the wife has been separated.

Prevent accidents.

Therefore, it is extremely important to prevent punctures and handle them correctly. So what are the most common causes of punctures?

Tire pressure. Many people may not know that puncture accidents are caused by low tire pressure. What we usually pay attention to is:

As long as the tire pressure is within the range specified by the manufacturer, do not adjust the tire pressure without authorization. In this way, we can ensure our safe driving.

Do not adjust the tire pressure without permission.

So how do we know if the tire pressure is normal? Then you need to use a tire pressure monitor. Tire pressure detection system. It is the use of wireless transmission technology to collect a series of data such as the pressure and temperature of the vehicle tires when the vehicle is stationary or driving.

Tire pressure monitoring. The data is also transmitted to the main panel of the cab main console. Digitally display relevant data such as tire pressure and temperature.

And when the tire pressure is abnormal, remind the driver to take preventive treatment. Whether the tire pressure is too high or too low, it can hurt a lot.

Abnormal tire pressure. When the tire pressure is too low. The tires are stressed unevenly. As a result, the temperature of the tire rises, which can easily lead to delamination of the rubber or broken cord. Eventually, it will lead to the occurrence of a puncture.

Tire pressure is too low. When the tire pressure is too high, it is easy to cause the tire contact area to become smaller, which accelerates the wear in the middle. When encountering slightly sharp pebbles, or obstacles, it is easy to cause a puncture.

But tire pressure is not absolute, new cars or new tires. In order to reduce the long-term pressure on the fixed position of the tire, it is usually necessary to apply a higher tire pressure.

This is the break-in that makes the tread quicker. Generally, this situation can be completed by only ten kilometers and is a means of protecting tires.

Even if the tire pressure is adjusted well. As the tire rolls, the principle of thermal expansion and contraction of air. The surface of the tire is always in elastic deformation. Due to the principle of thermal expansion and cold contraction, the tire pressure will increase.

And the weather conditions can also affect the tire pressure when it is winter or rainy days. As the temperature drops, the tire pressure drops as well.

Therefore, the tire pressure monitoring system is very necessary, and in Europe and the United States, the tire pressure monitoring system has always been standard. It can reduce our accident rate and ensure our driving safety.

This is the reset button on the tire pressure display device, and you can adjust it accordingly.

Specific method: Expand the content:

1. Button description.

The display has set the tire pressure alarm value before leaving the factory (the low pressure and high pressure alarm values are sum respectively, that is, when the tire pressure of the vehicle is lower or higher, it will alarm the prompt); If you really need to reset the setting, please press Reference: (Note: Only the low-voltage alarm value can be set, and the high-voltage alarm value is defaulted by the manufacturer.)

1).Low voltage alarm value setting.

Press and hold the MENU button for 3 seconds, and enter the setting function state after a "drop";

Press and hold the ADJ button for more than 3 seconds, the low voltage alarm value will change cyclically; When it flashes to the value that needs to be set, release it;

Press and hold the menu button for 3 seconds, when you hear the "drip-drip" sound, save and exit.

2).Unit settings.

Press and hold the MENU button for 3 seconds, and enter the setting function state after a "drop";

Press the ADJ key to switch between bar and psi.

3).Power on and off.

Power on: Press any button to power on.

Power off: Press and hold the ADJ +MENU button at the same time for more than 3 seconds.

2. Installation instructions.

When installing, it is recommended to keep the monitor on and placed in the center console of the car or other safe and stable position, and then screw on the sensor in turn to receive the pressure signal. If there is no signal, the display data will be updated when the vehicle has traveled a certain distance.

Special note: If the display still does not receive the signal after the vehicle has traveled a certain distance, please check whether the sensor does not open the valve open, in this case, please reinstall the sensor, tighten the sensor to ensure that the sensor is against the valve core and sense the air pressure.

3. Pairing instructions.

After pressing the "MENU" button five times in a row, you will hear a long "bi" sound and release it, and enter the tire matching state, and the "" icon of the left front wheel will flash;

Short press the "ADJ" button to cycle through the position of the tire that needs to be matched, after selecting, the corresponding tire symbol " " flashes, and then remove the external sensor of the corresponding tire, and deflate the tire intermittently (ranging from 5 to 10 seconds), and then quickly install the external sensor, at this time the sensor will send the code normally;

After the display receives the signal, " becomes "Pressure Value", and a short beep prompt, at this time short press the "Menu" button to confirm; Release after hearing the sound of "bi--", and the match is successful;

Continue to press the "ADJ" button and press the steps above to match the tires in the next position; After setting, press and hold the "menu" button for 3 seconds bi-bi" twice to save and exit, enter the tire matching state without doing any operation, and automatically exit in 3 minutes. (Paired before production, only need to be re-paired when the sensor is replaced).

This is a built-in TPMS, and the installation needs to remove the tires and do dynamic balancing. If you use an external tire pressure monitor, you don't need these steps and you can install it yourself.

The steering wheel can be adjusted to the tire pressure monitoring device by pressing the setting.

There is generally no problem with normal operation, and the operation can be carried out in the settings.

Press reset first, and then adjust the corresponding place.

You can ask the staff to handle this setting for you.

The Iron General Zhigan 700 external tire pressure monitor works automatically without special settings.

There is a reset button on the tire pressure display device, and you can adjust it accordingly.

Power on: Press the setting button for 1-2 seconds. Power off: Press the left stone adjustment button 2-3 seconds at the same time.

Setting: "1" alarm value, press the setting button to adjust H1 (the air pressure is lower than the value, then press the setting key to adjust the LO (the air pressure is higher than the value, and then press the setting key to adjust the alarm temperature 80.

2》After the tire pressure display is set to turn on the machine, press the setting button 5 times in a row, and the display sound shows the horizontal point of the left front wheel, and then take the left front wheel sensor close to the host to hear the oath sound, and display 00 after loading the tire valve, when the air pressure is displayed, press the setting button to save (save the prompt beep). Then press the adjustment button to set the right front, right rear, left rear, and finally press and hold the setting key to finish. (Sensor battery model 3 volt VR1632).

The Iron General Zhigan 700 external tire pressure monitor works automatically without special settings.

2.These products are independent systems and are not related to the original vehicle system;

3.It's easy to use. If it is Iron General 8886tpms, you need to turn on the Bluetooth of your mobile phone and dock the receiver to accept the data.

As long as the tire pressure monitoring is installed, you don't need to turn it on by yourself, and it will work automatically.

TP is automatically turned on and requires no additional operation. If you change the tire inflation pressure or change the wheels, you will need to set it again.

Tire pressure monitoring main role:

a. The tire pressure monitoring system is an "active safety equipment", and when the tire appears related to the "danger signs", it will alert the owner to take measures in time to slow down and stop for inspection or necessary rescue. Effectively avoid the occurrence of traffic accidents.

b. Economy: safety has been greatly improved and maintenance costs have been reduced. 1. Because it can be reminded in time to ensure the normal state of the tire pressure of the vehicle, the deformation and wear of the tire are reduced to a certain extent, and its service life is prolonged.

2. Under normal air pressure conditions, the "load" of the shock absorber components is alleviated, the impact on the chassis suspension system due to insufficient air pressure is reduced, such as deflection and deviation, and the "damage" of the suspension structure is effectively alleviated, and its service life is prolonged. (Photo by Cao Bo, Pacific Automobile Network).