How to enter the background management of Polar Route

There are two ways to enter the Polar Routing background, in the case of connecting the Polar Route, open the browser and enter it in the address bar to enter the Polar Routing background. Before entering, you need to enter the background password of the router, and the default password is admin. If you don't want your router background to be changed casually, it's better to change it to a more secure password.

The mobile phone has also been adapted, and you can easily access the extreme route background with your mobile phone.

Pole Routing is designed with user needs as the design concept, the hardware part is made of high-end materials, 100% lead-free, full SMD components, blue solder mask paint, safer, more environmentally friendly, all-aluminum alloy shell, excellent heat dissipation, beautiful and fashionable. The software part is the first to create a 1+X acceleration engine, with built-in 8G and 16G storage space, providing perfect acceleration services; The first market platform aggregates various applications to make the router truly intelligent; Mobile phone remote control, real-time traffic monitoring, more convenient and safer.

The overall design of the pole router is very small, and the thickness is much thinner than that of ordinary wireless routers, and even less than the height of a standing dime coin; Compared to the iPhone 5, the Pole Route is also very small. Whether it's for use at home or on the go.

Enter in the address bar of your browser.

From the T SDM team.

The background of the polar route seems to be, you try.

Here's how to set it up:

1. First, open the login page of the router background.

2. The default password of the Polar Routing background is: admin, however, it is generally impossible to log in to the background settings page of the Polar Routing with admin. Because, when setting up the polar route to access the Internet for the first time, the system will ask the user to reset the login password in the background, as shown in the figure below.

If you check "Set the management password is the same as the wifi password" when you set it up, the wifi password is the login password of the Polar Router, and you can use the WiFi password to log in to the background of the Polar Router.

3. Set the wifi password as the background login password of the polar route at the same time, if you did not check the "set the management password and the wifi password are the same" when you set it before, the system will use you to set a login password for the background of the polar router separately, as shown in the figure below. In this case, you need to enter the login password that you set separately before to successfully log in to the background settings page of Extreme Route.

The default first login will let you fill in,You access the default background address should be prompted to set a password,If you forget, it is recommended to restore factory mode and reset it。

When you set it up for the first time, you can see a prompt when you set up the wifi password.

1. Connect the network cable, router, and computer line, and start the computer upgrade and router equipment;

2. After starting the device, open the browser and enter it in the address bar to enter the wireless router settings interface;

3. An account and password to log in to the router appear in the settings interface, enter the default account and password admin, or refer to the manual;

4. After successful login, select the interface of the setup wizard or noisy, which will automatically pop up by default;

5. After selecting the setup wizard, a window will pop up to explain that you can set the basic parameters of the router through the wizard, and click Next directly;

6. According to the setting wizard step by step, the jujube block selects the Internet mode, and usually ADSL users select the first PPPOE, and click next after selection;

7. Enter the password applied for from the network service provider, and go directly to the next step after the input is completed;

8. Set the wifi password, try to make the alphanumeric combination more complicated, and it is not easy to be rubbed into the network;

9. After entering correctly, it will prompt whether to restart the router, select Yes to confirm the restart of the router, and you can access the Internet normally after restarting the router.

2. After entering the setting interface of the bureau Changmo router, click [External Network Settings] here you can set the router's connection to the external network, such as: ADSL or fixed IP Internet access.

3. Look at your own network and decide the method of setting.

4. Click [Wireless Settings] to set the name and password of the wireless router here.

5. The prompt of how many people is displayed in the middle of the polar route setting surface, click to enter. Here you can turn off the ** device, or limit the speed or change the name of the device displayed on the router.

6. The following advanced settings are all some options that are not commonly used. Click to enter. All of them are relatively straightforward displays in Chinese.

7. Complete the renderings.

The management address of the polar route is the background login address of the polar router, and you can set the polar route after logging in. In addition to using the login, you can also use the default IP address: to log in, and it can also be used to access the settings page of the Extreme Route.

Polar Routing is a high-speed intelligent wireless router produced by Beijing Jike Geek Technology Hail Coarse ****,Its background login address is and,When you are setting up routing,You can log in to the interface of Polar Routing through these two ways to operate and configure。

Pole Route Settings:

Step 1 Enter the default IP address of the router into the address bar and press Enter to enter the router's settings interface.

Step 2 Click "Extranet Settings", where you can set the router's way to connect to the extranet, such as ADSL or fixed IP to access the Internet.

Step 3 Choose the way to connect to the Internet according to your network environment, and then click "Wireless Settings" to set the name and password of the wireless router.

Other interfaces in the Polar Routing interface

1. In the prompt of how many people are displayed in the middle of the setting interface, click to enter the device that can be disconnected, and you can limit the speed or change the name of the device displayed on the router.

2. Under the advanced settings are some options that are not commonly used, click to enter are more straightforward displays in Chinese.

1. The default IP address of the router is: , enter this address into the address bar and press enter. The initial password is: empty, 2. After entering the router's settings interface, click [External Network Settings] Here you can set the router's connection to the external network, such as: ADSL or fixed IP Internet access.

3. Decide the method of setting up according to your own network environment.

4. Click [Wireless Settings] to set the name and password of the wireless router here.

6. The following advanced settings are all some options that are not commonly used. Click to enter. All of them are relatively straightforward displays in Chinese.

7. Complete the renderings.

At the bottom of the router there will be a login address and a user password.