What to do if it is slow to enter the router settings interface It has been stuck for 10 minutes

Solution: Restart your router.

Press the reset key. Wait, you don't have to wait for more than 1 hour.

Plug and unplug the network cable interface (that is, change the network cable to another interface, and sometimes change it back) Check the router's manual, or the label that comes with the router, there will be an IP address on it, and ensure that the IP address of your computer is the same number segment as the IP address of the router. If it's still slow, you can restore the router to factory settings and then re-enter the settings on the premise of remembering your broadband account and password.

A router (also known as a pathfinder) is a computer network device that can send data to a destination by packaging a network (selecting the transmission path of data), a process called routing. A router is a device that connects two or more separate networks, and routing works at the third layer of the OSI model, the network layer.

A router is a device that connects various LANs and WANs on the Internet, and it will automatically select and set routes according to the situation of the channel, and send signals in the order of the best path. A router is the hub of the Internet"Traffic police"。At present, routers have been widely used in all walks of life, and various products of different grades have become the main force to realize the internal connection of various backbone networks, the interconnection between backbone networks, and the interconnection between backbone networks and the Internet.

The main difference between routing and switching is that the switch takes place at the second layer of the OSI reference model (data link layer), while the routing takes place at the third layer, which is the network layer. This difference determines that routers and switches need to use different control information in the process of moving information, so the way they implement their respective functions is different.

According to the cause of the jam, the symptomatic solution is:

1. The router has been used for too long. It is recommended to turn off the router and restart it after a few minutes.

2. The device is too far away from the router. It is recommended to use the device close to the router.

3. The number of router access users is too large. It is recommended that not too many people use a router at the same time, and check whether there are any users who are using the Internet in time.

4. Network problems on the operator's side. It is recommended to wait for a while before using, if it is still stuck, you can consult the operator.

Solve the complex situation of wireless network lag:

1. If you often regularly drop a lot of people around the group, and after a while, the maintenance personnel tell you to restart the PON port equipment, then hurry up and let the maintenance personnel help you change to other optical splitters, it is very likely that the optical module on the upper link will not work or there are rogue cats on the optical splitter, and it can be solved by changing to other optical splitters.

2. After replacing the optical modem and the router or frequently dropping the line, this may be the poor contact between the cat and the network cable in the middle of the router, you can temporarily try the external trawl cable, if the external network cable is not dropped, it means that the internal network cable of the wall is in poor contact, you can spend money to ask the operator to help replace the network crystal head at both ends and the network panel on the wall.

3. A rare case is that the power supply of the cat and router is plugged in with high-power appliances (such as refrigerator and microwave oven), which may also cause the network to suddenly fail to get up.

There are several ways to solve the problem that the router is stuck and slow: avoid channel conflicts, change locations, and turn off regularly.

1. Avoid the conflict between Sun Yuanshu and the opening channel.

Band collisions are a common problem with slow WiFi speeds. In reality, the commonly used wifi frequency bands have two large frequency bands and 5GHz, which are also like two highways. There are 11 channels in the Chinese band and 15 channels in 5GHz.

The number of channels is like the number of lanes.

In the same space, if the data travels on the same channel, there will be conflicts, so the network speed will be slowed down. If we want the network speed to be faster, we need to choose a channel that is less used by people as much as possible, and the channel selection can use inssider to detect channel conflicts.

2. Change the position.

Installing a wireless router in the center of the house is undoubtedly the best option. It's best to place the wireless router at a certain height so that the furniture doesn't block the wireless signal first. The router's signal is transmitted through electromagnetic waves, so any device that can generate electromagnetic waves will affect it.

Therefore, the router should not be too close to other electrical appliances, such as TVs, induction cookers, microwave ovens, etc., which will interfere with the router signal.

It is recommended that you place the router in a relatively open place, the narrower it is, the easier it is to affect the reception of the signal, in addition, the antenna direction of the router is also very important, and the signal strength can be adjusted by adjusting the antenna.

3. Regular closure.

The router must be turned off regularly, and the normal shutdown time is about 5-10 minutes a week. Let it rest, this is an important factor in the smooth operation of the router. In life, there may be many friends who never take the initiative to turn off the router because they use it and keep it all the time.

In this case, it's no surprise that the network is slowing down.

Problems to be aware of when using routers

1. Avoid thunderstorms. Using a router during a thunderstorm can easily cause damage to the router, and even the router cavity may become a detonator, resulting in power failure and damage to other electrical appliances.

2. Avoid turning on for a long time. A router is an electronic device that is composed of a circuit board and electronic components such as CPU, flash memory, and memory. Just like ordinary mobile phones and other electronic products, after a long period of use, the various electronic components of the router will also be lost.

Moreover, the long-term use of the router, the frequent access and data transmission of a large number of terminal devices will not only greatly increase the possibility of the operating system producing wrong codes, but also make the memory space occupied a lot and cannot be released, which will eventually lead to the router slowing down, stuck, and crashing.

Therefore, it is recommended that when you are not at home, you can turn off the router and turn it back on when you get home, which not only saves power, but also extends the life of the router.

3. Pay attention to the router password setting. Nowadays, there are many software that rub the net, and if the password setting is too simple, Zefeng will be rubbed on the net, not to mention, and it is also very easy to be hacked, causing hidden dangers to personal information and property.

A router is a hardware device that connects two or more networks, acts as a gateway between networks, and is a dedicated and intelligent network device that reads the address in each packet and then decides how to transmit it. The following brings you how to set the router speed slowly, welcome to read for reference.

The router can set up a fast wireless network

The first is to check whether the signal of the book is full, how only one to two grids, the signal is unstable, in this way, the transmitted data packets are lost, and the Internet access is slow.

The second is to enter the settings interface of the wireless router, one of which is the rate, set to the highest, set the power to the highest, and set the channel to be farther away from the current channel, suspecting that there is a wireless signal near you, or there is co-channel interference, such as a microwave oven, etc.

Third, use the machine that accesses the root network cable for the first time, enter the router settings interface, there is a MAC address clone to eliminate the mind, just click on the clone directly, so that the original machine accesses the network, and Netcom will not be restricted. Hope it helps.

The second way to set up a fast wireless network on the router

You need to see if your wireless router does not support the speed limiting function; If the router can be controlled by IP bandwidth; Choose your router when supported! Below is TP's. Wireless routers, you can only take the test!

TP's wireless router, you enter the wireless router control interface; Find IP Bandwidth Control: Enable IP Bandwidth Control.

Fill in the size of your home's broadband: change the restriction on the maximum broadband to the limit on the maximum bandwidth; Put the back of each one on the mark; Save it.

There is a third way to set up a fast wireless network on your router

1. Connect with a network cable to see if the network speed is normal and make sure the router is in good condition.

2. Use two machines to connect and upload a file to see if it is a wireless problem.

3. In addition to the store, try it in a different place. See if there's any interference around.

4. Use another computer to see if it can be used normally under your connection. (Of course, if you can measure it at 2 o'clock).

5. Find someone else's wireless router to try it at your place, whether it is normal. If other routers are available, and this one doesn't work, if you use it for less than two days, look for a merchant to replace. If it's a source of interference, see if there's a problem.

In addition, the general router can check the IP and MAC address of the connected device, you can check whether someone has stolen your network, and it is not completely safe to set a password. You'd better bind the MAC address.

Router freezes and the network speed is slow

1. Check the cause of slow network speed.

Now disconnect the router and disconnect the wired client. Now let the router connect to only one device, and then perform a speed test on the various software in the computer device. If the speed and bandwidth values we are testing are about the same, then it is not a problem with the speed or the software.

It may be a problem with the router, and you need to adjust the bandwidth value of the router.

2. Check the settings of your router.

Check to see if the router at home has turned on the function of limiting IP bandwidth, if this function is turned on, it will cause our network speed to slow down, just turn it off. Then do a speed test on the computer to see if the computer has any software and processes such as P2P turned on, and if so, turn it off, so that the computer will not slow down the Internet speed. You can install a 360 security guard or Kingsoft guard, turn on the firewall function of traffic, monitor all software processes, reduce traffic output, and speed up the network speed.

3. Check if there is any rubbing net.

Sometimes our wireless network is cracked by the people around us, and rubbing the network can cause our own network speed to become very slow. The more people who rub the Internet, the slower our Internet speed will be, and sometimes even the machine will freeze. We can open our wireless router to set it up to see if there are other devices using our own wifi, and if so, change the password directly.

Then go to the network to limit the wifi setting, so that you can speed up the network. At the same time, it is also possible that the line of the router at home is faulty, and if the line is damaged, the network speed will be slow. Check it, if there is a timely repair, the network speed will be faster.

Turn the cat off, restart the router and computer for testing.

It may be that the IP address of the router is incorrect, it is recommended to try it, or look at the specific IP address on the router logo. Not all routers have IP addresses.

As a wireless network device, routers are becoming more and more popular in various homes, but many people also say that the network speed was still good when using network cables before, but since the router was installed, the network speed has become slower. There are usually many reasons for this, and we need to take some methods to eliminate them one by one, and solve the phenomenon of slow network speed of the router after a long connection time. <>

First of all, if the wireless network in our home is rubbed by other people, then it will cause the network speed to slow down, especially the more people who rub the network, the network speed will become slower and slower, and even the phenomenon of stuck. Therefore, we need to open the settings in the router to see if there are any devices we don't know are using our own network, if there is a phenomenon of rubbing the network, then we must change the password immediately, and then limit the number of devices used in the wireless network, so as to improve the speed of the network. Of course, if there is a problem with the router's line, it will also cause the network speed to slow down, so you also need to check whether the router's line is damaged.

If there is, then be sure to repair it immediately, which will also make the network faster. <>

In addition, if the router has enabled the function of restricting IP, it will also cause the network to slow down, so if the network speed is slowed down due to this reason, then we need to turn off this function. Then use the computer to test the network speed, to see if some software and processes are turned on to affect the use of the network, if these processes and software are enabled, then be sure to turn off in time, so as to improve the network speed of the network computer. <>

To sum up, this is all the reasons why the network speed slows down after the router connection is long, and how to solve it. When using a router, although many devices can use the network by connecting to the router, once the number of devices used is large, it will cause the network speed to slow down, so be sure to set the number of uses when surfing the Internet to prevent the occurrence of the phenomenon of rubbing the network.

1. If the router is used for a long time, the internal will overheat, resulting in a slow network speed. It is recommended to disconnect the power supply when no one is around, turn off the router and rest for a while; 2.Or it is a line problem, the network cable connection is unstable, and the network cable quality is too poor. It is recommended to find a master for repair.