I don t have ADSL at home, how do I set up the router?

The "WAN" interface of the router is connected with a network cable, and the LAN 1, LAN 2, LAN 3, and LAN 4 ports of the router are connected to each host.

2. Set the IP and DNS acquisition method to automatic. Right-click the Local Connection property Network Internet Protocol property, and the upper and lower points will be automatically obtained.

3. Check the IP address at the bottom of the router like ", enter the IP address you see in the browser address bar, log in to the router settings interface, fill in the username and password of the login interface "admin", and then follow the Chinese prompts to enter the account and password.

Hope I can help you.

What you are talking about should be the community optical fiber network,This is exactly the same as the connection method with the cat,When you set the distance, you still have to choose PPPoe dialing,Connect the network cable directly to the computer to the WAN port of the route,Then set the password for surfing the Internet,If you won't add my friends。

The WAN port IP address is set to be automatically obtained, and the LAN port IP address is set to 254 digits except the routing IP).

The password used to log in to the router. It is displayed underneath the router. Presumably, open the login router to set it up.

1. There are many wireless routing problems, the longest is that it is not plugged in, you try it with a cable first, if it doesn't work, the gateway is not set. There are tutorials available online, so give it a look! Wireless routing is easy to steal, my friend's mobile phone, plugged in the laptop can steal the network.

2. When you enter the router for the first time, a setup wizard will appear, and you can follow the steps according to the prompts. If you don't have a setup wizard, you can follow these steps:

2) In the WAN port settings, enter your broadband account and password and save it.

3) Click on the wireless settings: turn on the DHCP function, and the password, you can choose to set it or not.

3. After the above operations are completed, check whether your ADSL (hereinafter referred to as the cat) is connected to the WAN port of the router. It's usually the blue one. Make sure that all of the above operations are done, restart the router and the modem.

At this time, the router will automatically dial out the Internet to access the Internet. After about 3 minutes, turn on the IE on the computer and see if you can access the Internet. If it can be on, it means that both the router and the cat are correct.

If you can't get it, there must still be some steps that are not set up correctly. Talking about wireless internet. If you can access the Internet with a network cable, turn on your wireless connection, check whether the IP address of the wireless connection is automatically obtained, and if so, see if the gateway is

If all of this is correct, congratulations, you can go wireless. If you still can't get it, you can manually set your IP address. That's it.

If a broadband fault occurs, you can use the following methods to troubleshoot the fault:

1 Use stand-alone dial-up, if you are using a router, please temporarily disconnect the router for testing;

2 Restart the modem and the computer;

3 Re-create the broadband dial-up connection and try to dial again. How to do it: Start the Program Attachment Communication New Connection Wizard.

If the self-troubleshooting still does not recover, you can log in to the mobile phone business hall Customer Service Broadband Fault Report for feedback, and we will get in touch with you as soon as possible.

You first have to find out what is connected to the network cable port at home, the router? Hub?..

It's not that you don't have to add an account password, but you have another device to dial in instead.

Your so-called setup is only to ensure that the wireless network card is paired with the wireless router, not that the router is connected to the external network (although the router has a function), and you can only determine how to solve this problem by figuring out the first problem.

After the router is connected to the computer, enter or enter the router settings in the IE browser (look at the label behind the router, which has the entrance address and username and password of your router), network parameters "Set the WAN port settings" "WAN port connection type: set to dynamic IP". Or go to the Router Settings Setup Wizard and follow his instructions to set it up step by step.

By connecting to the computer, look at the IP address, gateway, and DNS assigned by the local connection, and make a note of these parameters.

Incoming route, change the dialing method to a static IP address, and fill in the ones you have written down.

Just enable your wireless function normally.

Connect the network port directly at home to the WAN port of the wireless router.

Yes, because the router can use PPPOE to dial up the Internet, which is the same as a broadband connection.