Wuling Light 6376C3 reverse gear can not be hung

Hello, there are several reasons for the problem you described.

The clutch is too low.

The inside of the gear cable is rusty, inflexible, or broken.

If it can be hung in, it is not easy to hang because there is no synchronizer in reverse gear, so it is more difficult to hang.

There is a problem with the gear operating mechanism.

There is a problem with the reverse shift gear inside the gearbox.

Hello. The reverse gear cannot be hung up, which may be caused by the loose wear of the gear mechanism, the wear of the cable and the stagnation.

Drive to the repair shop and ask the master to remove the cable and hang the reverse gear directly on the small cover on the gearbox to try, the good hanging is the above problem, and the useless is the problem with the reverse gear inside the gearbox. [Car questions, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Hello. If other gears can be hooked up, please check whether the gear shift mechanism is faulty!

Then disassemble the gearbox and check if the reverse gear is faulty!

Hope it helps! Have a nice ride! [Car questions, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Hello! This situation is generally caused by the poor combination of the clutch plate and the pressure plate! It's hard to hang up! I hope it can help you.

Let's go to the repair shop and check it out

Summary. Hello, dear, car master exclusive technician for your service, attentive, careful, concentrate on answering your car questions, for you to find the corresponding problem solutions and solutions, will provide you with a satisfactory answer! We hope you find this service helpful.

If it helps you, we look forward to your likes and attention. Wishing you a blessed Year of the Tiger and good luck

Hello, the third gear of the new Wuling light car can not be hung, so the reasons related to this situation are as follows.

First, first check whether the gap of the gear mechanism is large? If there is a problem, this is a new gear mechanism.

Second, the phenomenon caused by the problem of the three-gear gear or synchronizer inside the gearbox, this situation occurs in the new car, which is an obvious quality problem of the vehicle, and the 4S store can be asked to replace the new gearbox.

What's going on with the fact that the 3rd gear of the new Wuling light car can't be hung.

Hello, I'm helping you sort out the answers to your questions, please wait a moment

Hello, dear, the exclusive technician will serve you, attentively, carefully and attentively to answer your car questions, find solutions and solutions to the corresponding problems for you, and will provide you with a satisfactory answer! We hope you find this service helpful. If it helps you, we look forward to your likes and attention.

I wish you good luck in the Year of the Tiger Hello, Wuling Light new car three-chamber buried cautious gear can't be hung, then the reasons related to this situation are as follows: First, first check whether the gap between the gear mechanism is large? If there is a problem with the liquid, this is the need to replace the new gear mechanism Second, the third gear inside the gearbox or the synchronizer has a problem caused by this phenomenon, the new car has this situation, this is an obvious vehicle factory quality problem, you can ask the 4S shop to replace the new gearbox.

Summary. Hello dear, happy to answer your <>

The failure of the Wuling light gear is due to the failure of the transmission synchronizer, clutch, and gear. When we are in gear, the role of the synchronizer is to adjust the speed between the spindle and the slave shaft to the same speed, so that the gear change will feel smooth. If there is a problem with the synchronizer, it can lead to a stall or even a failure to change.

In addition, the clutch may wear out or malfunction, losing its engagement and disengagement, making it impossible for the car to get off to a smooth start.

What's the matter that Wuling's light file can't be hung up.

Dear, hello, very high Tong Changxing answers your <>

Wuling's seepage front light gear can't hang up because the transmission synchronizer, clutch, and gear are faulty. When we are in gear, the role of the synchronizer is to adjust the speed between the spindle and the slave shaft to the same speed, so that the gear change will feel smooth. If there is a problem with the synchronizer, it can cause the cluster wheel to change gears or even not be able to change gears.

In addition, the clutch may wear out or malfunction, losing its engagement and disengagement, making it impossible for the car to get off to a smooth start.

Here are some <> related extensions that we hope you will find helpful

We need to understand the transmission structure family Zheng Yan of Wuling Light. It uses a suspension transmission, the so-called suspension transmission, which is to suspend the transmission between the wheels, which can effectively reduce friction and vibration, and improve the comfort and stability of driving. However, the disadvantage of this cluster search is also very obvious, that is, the efficiency of transmitting power will be slightly reduced, especially in the high-end position.

In addition, if the gears are worn, there will be gaps between them, and there will be a frustration when changing gears, and even a "click, click" sound. Therefore, when the vehicle cannot be put into gear, it is best to check whether there is a problem with the synchronizer, clutch and gear parts of the transmission. In short, Wuling Light is an increasingly popular minivan, but it also needs timely maintenance, especially for such an important component as the transmission.

Hopefully, this article can provide some help to car owners in need.

Summary. Hello dear, if you can't hook the Wuling Light vehicle into or 5th gear, while other gears can be hooked normally, there may be the following reasons:

Hello dear, if you can't hook the Wuling Light vehicle into or 5th gear, while other gears can be hooked normally, there may be the following reasons:

1.Clutch issues: If the clutch is worn or needs to be adjusted, it may not be able to completely disengage from the engine, which can make shifting more difficult.

At this point, you can try to use both hands to lift the lever up and try again, or stop the car, put it in neutral, release the clutch pedal, and then try to change gears after pressing it down. 2.Transmission issues:

If there is a problem with the transmission, such as a damaged synchronizer or worn gears, it can also cause it to not be able to engage a particular gear. At this time, it is necessary to go to a professional car repair shop for inspection and maintenance.

3.Rail problem: A rail stick is a mechanical part that connects the transmission to the gear lever.

If the rails are damaged or worn, it can make shifting difficult. At this time, it is also necessary to go to the car repair shop for inspection and replacement. In conclusion, if you can't solve this problem, it is best to take the vehicle to a professional car repair station for inspection and repair.

This ensures the safety of your vehicle and avoids more serious damage.