I m a novice piano, how do you look at the piano staff? The more complete, the better.

I'm also a newbie, and my trick is to use him directly as a tablature, press the key where the notes are, and correspond to them. It feels like the stave is like a score made for the piano, and it is clear at a glance. The introduction is to look at the introduction of stave in the library.

4742905, welcome to communicate.

Answer: Staff formula 1:

One line to five lines carry the reputation of God, three, five, seven, two, four. Next to fourth, two-four-six-one-three.

The argument is that the notes on the first line to the fifth line are 357 (2) (4) plus one to four rooms and 246 (1) (3) (parentheses indicate trebles).

Staff formula 2:

1357246,2461357 This covers the next plus line to the upper plus line, as well as the next plus one to the upper plus two, and the regularity is very strong.

Expand your knowledge

1. Introduction to piano staff--- composition of piano staff.

1. Staff is the five parallel horizontal lines used to record musical notes, called staves. The five lines of the staff and the five lines formed by the five lines are calculated from the bottom up.

2. If the ** work is written on several lines of staves, then these several lines of staves should be connected by cleves.

3 Clef: It consists of two components: the starting line (the vertical line that connects several lines of staff) and the parentheses (the brackets that connect several lines of staff).

4 There are two kinds of brackets: floral and straight.

2. Introduction to piano staff--- notes and rests.

1. The symbols used to record the progressions of different lengths of notes are called musical notes.

2 The symbol used to record the discontinuities of different lengths of notes is called rest.

The basic correlation between the values is that the ratio of each larger value to its nearest smaller value is a ratio of 2 to 1. For example:

A whole note is equal to two quarter notes, and one half note is equal to two quarter notes; A full rest is equal to two half rests, etc. Clef: It consists of two components: the starting line (the vertical line that connects the staves of several rows) and the bracket (the bracket of the staves that connect the virtual lines).

1. Recognize staves and their formulas

2. Treble clef:

Add one line and you sing 1, and add one and you sing 2

One, two, three, 3, 5, 7, four, five, 2, 4, 4, 4, 4, 4, 3, 4, 4, 3, 3, 4, 3, 3, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, 3, 1, 2, 3, 1, 2, 3, 1, 2, 3, 1, 2, 3, 4, 3, 4, 3, 4, 3, 4,

Add 123 6 1 3, 4 5 5 7, add 123 5 7 2, 4 5 5 6

3. Bass clef:

Sing 1 on the top line, and 7 on the top one

One, two, three, 5 7 2, four and five lines sing 4 6, one, two, three, 6 1 3, four sing 5, add one, two, three 3 1 6, four and five lines sing 4 2, add 123 4 2 7, four and five sing 5 3

end

1. Diagram of the correspondence between the notes and the piano keys

2. **c sings 1 in the simple score, that is, do, d sings 2, that is, re, and so on.

3. Under normal circumstances, the score of the treble clef is played with the right hand, and the score of the bass clef is played with the left hand.

Recognize the notes

1. Generally speaking, a note is composed of three parts: the head, the stem, and the tail; The head can be either hollow or solid (see figure below), with a difference of half the number of beats; Except for whole notes, all other notes have stems, and the original value of adding stems is also halved.

Note: Sing the corresponding note according to the line or between the note heads

As shown in the diagram above, the whole note sings 4 beats, the half note sings 2 beats, the quarter note sings 1 beat, the eighth note sings 1 4 beats, the 32nd note sings 1 8 beats, and so on, each additional note beats becomes the original 1 2.

3. A note note is a small dot marked on the right side of the note head to increase the beat value of the note. If there is a dot on the right side of a note, it means that the beat value of the note will be increased by 1 2 beats on the original basis.

Commonly used diacritics

A flat mark (b) indicates a decrease in the pitch of a fundamental scale by a semitone, falling according to the line or intermittent in which the mark is placed.

The reduction mark ( ) indicates that a tone that has been raised or lowered is restored.

The sharp sign ( ) indicates that the pitch of the basic scale is raised by a semitone, descending according to the line or intermittent in which the mark is placed.

For example:

As shown in the figure above, the symbols are Fa Rise, Rise Do, and Drop Si

end rest.

Rests represent discontinuities of different long and short tones, and are represented according to different tempo values as shown in the figure above.

Sustain line

The curve that curves upwards in the red frame above is called the sustain, which can connect two or more notes of the same pitch and act as one note when played on the piano, and its beat value is equal to the sum of the beat values of these notes. Of course, the sustain line can also be represented by a curve that curves downward.

Precautions

There are many more staff symbols for piano, and it is impossible to mention them all. This experience is only based on my understanding of staves, and can only serve as an introduction to basic knowledge, and many professional knowledge needs to be consulted by professional teachers.

Here's how to read piano staff:

1. First of all, the first step is to identify the position of **c. **c is what we usually call do, knowing **c, all the notes in the future will go up or down around **c. **cThe key to the right, the pitch goes higher and higher; The key to the left, the lower the pitch goes.

2. Learn to read treble clef. The treble clef is generally used for the right hand staff when we play, and the right hand staff is the main theme of the song, so it is important to know how to read the treble notation. First of all, the first step is to find **c, which is what we usually call do.

In the treble clef, the position of **c is at the bottom of the staff plus a line.

3. Learn to read bass cleves. The bass clef is generally used for the left-hand music when we play, the left-hand staff is the auxiliary melody that makes up the song, and the song without the auxiliary melody will have a very single timbre and is not good. It is also necessary to find **c, which is located at the plus line on the stave.

4. Learn to memorize some key notes to help deduce other notes in the score. If you only remember **c one do, then according to the law of going up to the bottom, you have to count. So it's best to remember some key points, for example, do+ in the treble clef (that is, the octave on the do, because we don't know what symbol to use, we can only write it like this, just understand).

5. Learn to look at the distance of eight degrees. There must be certain rules in the score, and if you scribble it through, it will definitely not sound good, and the octave difference is relatively common in the score, so we need to know how to find these rules. Remembering the octaves of difference can help you read music faster.

On the way, AB is an octave apart from two points.

The key to quickly recognizing staves is to be familiar with the various symbols on staves.

The main symbols on the staff are as follows:

1 corresponds to do, implicit or 2 corresponds to re, 3 corresponds to mi, 4 corresponds to fa, 5 corresponds to so, 6 corresponds to la, and 7 corresponds to do.

The ascending sign is marked by ( ) to indicate that the basic tone of the stove is raised by a semitone.

The flat sign is indicated by ( ) to lower the cardinal scale by a semitone.

There are five types of diacritical marks, in addition to ascending and descending marks, there are:

The sharp-rising mark ( ) indicates that the cardinal scale is raised by two semitones (one whole tone).

A falling mark ( indicates that the basic scale is lowered by two semitones (one whole tone).

The reduction mark ( 告行) indicates that a tone that has been raised or lowered is restored.