Formaldehyde pollution is really annoying, how to remove it

I bought a formaldehyde remover effect is not bad, clear at the same time can also purify the air, in the future can also be used as an air purifier to kill two birds with one stone, the only drawback is that the active oxygen is a little light fishy, I can't stand the smell of this taste, but it is beneficial to the body, there is a kind of fresh smell of bleach after use, and I will get used to it after a long time.

If the taste is too big, ordinary methods will not solve the problem. It is recommended to install an air circulation device at home, use activated carbon as a precautionary material, and pay attention to the regular replacement of the precautionary material. The air displacement rate is fully considered in the design and installation, and the air circulation in a large range is formed as much as possible, rather than a small local circulation.

Bamboo charcoal can adsorb a variety of decoration pollution! If you can't get bamboo charcoal, you can use charcoal, but the effect is almost good! Onions, pineapples, tea, orange peels just mask the smell!

If it is left for a long time, it will rot, and it will not deodorize, and it will only cause 2 times of pollution! The water basin and vinegar basin have a little effect, but they can only be reflected in the next day!

Formaldehyde is released for a long time, and long-term excess of the standard will cause the impact on human health, and the main harm is the decline of immunity. Indoor formaldehyde exceeds the standard mainly due to furniture, the furniture release cycle is long, it is not easy to remove, and the impact is that it has a greater impact on the child's respiratory tract and resistance. You can learn from the following methods:

Step 1: Adopt the plant decontamination method. Suitable flowers and plants for indoor planting are:

Spider plant (including orchid grass), cactus (cactus), aloe vera, etc., such plants have a certain deodorizing effect, but they are absorbed by plants for a long time, and the effect is not obvious. Some of the leaf clay materials are put together, and they will be decomposed after adsorption, and they will not be saturated by adsorption.

Step 2: After effective ventilation, indoor air pollution has been greatly reduced, and the formaldehyde release inside the furniture is indeed a long process, so choose a good herbal formaldehyde scavenger.

Step 3: Open the windows for ventilation. The decoration has just ended, the smell of the new house is serious, and the pollution must be several times, or even dozens of times exceeded, so the initial one to two weeks, what means do not play a big role, the best way is to open the window for a long time to ventilate.

Commonly used indoor air treatment methods are:

Ventilation: Ventilation can reduce the concentration of indoor pollutants to a great extent, but it takes a long time.

Activated carbon: Activated carbon has strong adsorption capacity, but it cannot be treated from the source.

Indoor plants: Most plants can purify the air, but they are too inefficient and not easy to place in a newly renovated environment.

Masking method: that is, using vinegar, tea, lemon slices, pineapple, grapefruit peel and other fruits with a strong taste to cover up the decoration odor, this method is not advisable, and the odor has not disappeared.

Professional team management: professional governance such as Yaju indoor air purification company, with many years of experience, the use of professional technology to remove formaldehyde, benzene, TVOC and other treatment from the source, if you need to contact us. (Chongqing Yaju indoor air pollution control****).

I have summarized these four steps to remove pollution from new houses, and I hope it can help you!

Step 1: An air purifier purifies formaldehyde

The air purifier has a fan-like device, and at the same time has a built-in filter, which can filter the indoor airIn the case that the ventilation conditions do not allow, the appropriate amount of use is still effective.

Step 2: Adsorption and decomposition to purify formaldehyde

Baizao is a pure natural mineral purification material, and its adsorption and purification speed is dozens of times that of activated carbon, andIt is not only adsorption, but also can decompose formaldehyde, will not produce secondary pollution, and does not need to be dried during use, which is more suitable for people who quickly remove aldehyde and have no time to take care of itHowever, it is more expensive than activated carbon, and you can choose the method that suits you according to your actual needs.

Formaldehyde is removed by algae.

Step 3: Natural spraying purifies formaldehyde

Compared with ordinary formaldehyde scavengers, it is not only safe and non-toxic, does not hurt furniture, but also can penetrate the inside of furniture panels, accelerate the decomposition of formaldehyde from the source, and the speed and effect of purification are faster and betterIt can be dried 1-2 hours after spraying, and the furniture can be used normally after drying, and the furniture can also be wiped at will, without affecting its function and not delaying daily life.

Step 4: Purify formaldehyde with the help of green plants

Pothos and spider plant in green plants are commonly used formaldehyde plants, and they have a certain effect of purifying the airFor the newly renovated house, you can put some in the room in an appropriate amount, and the chaos can play a role in auxiliary purification. At the same time, it is also an embellishment and decoration for the new house.

I have summarized these four steps to remove pollution from new houses, and I hope it can help you!

Step 1: An air purifier purifies formaldehyde

The air purifier has a fan-like device, and a built-in filter screen, which can filter the indoor air, and can not open the window for ventilation or night time, which can replace the use of ventilation, and has a good effect on removing the pollution of confined spacesIn the case that the ventilation conditions do not allow, the appropriate amount of use is still effective.

Step 2: Adsorption and decomposition to purify formaldehyde

Baizao is a pure natural mineral purification material, and its adsorption and purification speed is dozens of times that of activated carbon, andIt is not only adsorption, but also can decompose formaldehyde, will not produce secondary pollution, and does not need to be dried during use, which is more suitable for people who quickly remove aldehyde and have no time to take care of itHowever, it is more expensive than activated carbon, and you can choose the method that suits you according to your actual needs.

Formaldehyde is removed by algae.

Step 3: Natural spraying purifies formaldehyde

Compared with ordinary formaldehyde scavengers, it is not only safe and non-toxic, does not hurt furniture, but also can penetrate the inside of furniture panels, accelerate the decomposition of formaldehyde from the source, and the speed and effect of purification are faster and betterIt can be dried 1-2 hours after spraying, and the furniture can be used normally after drying, and the furniture can also be wiped at will, without affecting its function and not delaying the daily life.

Step 4: Green plants assist in the netting of formaldehyde

Pothos and spider plant in green plants are commonly used formaldehyde plants, and they have a certain effect of purifying the airFor the newly renovated house, you can put some in the room in an appropriate amount, which can play a role in auxiliary purification. At the same time, it is also an embellishment and decoration for the new house.

1. Green plants, because plants have a strong ability to adsorb formaldehyde, can be placed in the house to remove formaldehyde pollution from agave, pothos, spider plant, tiger pill orchid, aloe vera and other green plants.

2. Activated carbon, because activated carbon also has the ability to adsorb formaldehyde, and the adsorption capacity is stronger than that of green plants, but its appearance is not very beautiful.

1.Ventilation: Keeping indoor air circulation is the easiest way to remove formaldehyde. Try to open doors and windows to let fresh air into the room to accelerate the volatilization of formaldehyde.

2.Activated carbon adsorption: Activated carbon has adsorption capacity and can adsorb formaldehyde in the air. Placing activated charcoal in different locations in the room can help reduce formaldehyde concentrations. Note, however, that activated carbon has a limited adsorption capacity and needs to be replaced regularly.

3.Air purifier: Buying an air purifier specifically for formaldehyde can effectively remove formaldehyde from the air. Choosing an air purifier with a highly activated carbon filter can improve the effectiveness of formaldehyde removal.

4.Plant removal: Some plants have the ability to remove formaldehyde, such as spider plant, pothos, tiger pill orchid, etc. Growing these plants indoors can help absorb formaldehyde. Note, however, that plants have a limited effect on removing formaldehyde and cannot rely solely on plants.

5.Photocatalyst: Photocatalyst is a special material that can decompose formaldehyde under ultraviolet light. Placing the photocatalyst in different locations in your home can help reduce formaldehyde concentrations.

6.Professional governance company: If the above methods cannot meet your needs, you can also consider hiring a professional formaldehyde treatment company for governance. They usually use special equipment and methods to reduce formaldehyde concentrations in a more effective way.

Note that the release of formaldehyde is a long-term process. To ensure that indoor formaldehyde concentrations are reduced to safe ranges, continuous formaldehyde removal measures are required. At the same time, we should also pay attention to the environmental performance of furniture and decoration materials, and choose products with low formaldehyde content.

Formaldehyde is a common indoor pollutant, the presence of which may cause adverse effects on human health. Here are some ways to remove formaldehyde contamination:

Ventilation is strengthened. Opening windows or using devices such as air purifiers can increase the circulation of fresh air and help reduce indoor formaldehyde concentrations.

Use formaldehyde adsorbents. Formaldehyde adsorption materials such as activated carbon, zeolite, and anion generators can effectively adsorb and reduce the concentration of formaldehyde.

Indoor plant purification. Many indoor plants such as aloe vera, spider plant, and tiger tail can absorb formaldehyde and other pollutants through photosynthesis and release oxygen to purify indoor air.

Pay attention to home improvement. Choose decoration materials with low formaldehyde emissions, such as E0 boards, water-based paints, etc. Be cautious.

Pay attention to indoor hygiene. Timely cleaning, keeping it dry, and avoiding the accumulation of dust can also help reduce formaldehyde pollution in the spine room.

It should be noted that different formaldehyde removal methods have different effects, and the corresponding method can be selected according to the actual situation. If you suspect that your health has been seriously affected, it is recommended to consult a professional for treatment.

Due to the nature of formaldehyde is soluble in water, many people will choose to place a few basins of water, salt water or vinegar at home to remove aldehyde, this method is also unscientific, not to mention that the area of potted water is too small, the effect on formaldehyde is minimal, and the home is full of potted water is also easy to increase humidity, and accelerate the release of formaldehyde.

Practical Zen Wax Method.

1. Open windows for ventilationWe only need to open the doors and windows of the home every day for ventilation, which can effectively discharge indoor pollutant gases to the outdoors and flow the outdoor air into the room. However, ventilation is affected by weather conditions, so it can be used as the most basic auxiliary purification method.

Practical approach.

Second, the source of purificationThe natural decomposition medium spraying of new furniture can penetrate the interior of the furniture plate to induce decomposition, which can accelerate the removal of furniture pollution, and at the same time cooperate with the placement of some algae sodium packets, which can play a continuous purification effect, and the algae can decompose formaldehyde without drying, which can well ensure that there will be no formaldehyde ** problem in the later stage, and it will be more reassuring after moving in.

Practical approach.

3. Wipe regularlyFurniture is one of the main odors in the home, they mainly come from the wood paint inside and on the surface, these harmful gases will be slowly released into the air through the surface of the furniture, clean water wipes the surface of the furniture, can take away part of the pollution attached to the surface of the furniture, to accelerate the removal of furniture odor has a certain help.

Practical approach.

Fourth, place green plantsAlthough the effect of purification is limited, but in the renovated new house, the appropriate placement of these green plants can still play a certain role in auxiliary purification, and the green plants in addition to purifying the air, also have a certain decorative effect on the new house, and it is a good choice to place some appropriately.

You can try the following methods to quickly remove formaldehyde:

Ventilation: Ventilation is the easiest and most effective way to remove formaldehyde. Open the windows to let fresh air into the room and expel the dirty air from the room.

Activated carbon: Activated carbon is a material that can adsorb formaldehyde. Putting activated carbon into a room with serious formaldehyde pollution can effectively absorb formaldehyde.

Plant absorption: Some plants have the ability to absorb formaldehyde, such as ivy, reed, spider plant, etc. Putting these plants into a room can effectively absorb formaldehyde indoors.

Ultraviolet lamps: Ultraviolet lamps can break down formaldehyde. The use of ultraviolet lamps in rooms where formaldehyde pollution is more serious can effectively decompose formaldehyde.

Regular cleaning: Formaldehyde can adhere to dust and dirt, so regular cleaning is also a way to remove formaldehyde. Cleaning surfaces such as furniture, floors, and walls can remove formaldehyde-attached dust and dirt.

It should be noted that the above methods are only temporary measures to quickly remove formaldehyde, if your formaldehyde pollution is more serious, it is recommended to carry out professional measurement and treatment.

increase the temperature and humidity in the room". In order to accelerate the release of formaldehyde, we can increase the indoor temperature and humidity, because the higher the temperature and humidity, the faster the volatilization of formaldehyde, and then open the window, the ventilation will blow away the indoor formaldehyde, so that the indoor formaldehyde concentration can be quickly reduced.

The best way to speed up formaldehyde release is to ventilate, which is not only effective, but also very low-cost!

In fact, the factors that affect the efficiency of formaldehyde release are temperature, relatively high humidity, and the important thing is the concentration of formaldehyde in the indoor space environment!

If you want to accelerate the release of formaldehyde, you can start by increasing the temperature and relative humidity of the room! At the same time, try to reduce the concentration of formaldehyde in the indoor environment!

The concentration of formaldehyde in the indoor environment will have a saturation value. Once the saturation value is reached, the release efficiency of formaldehyde from furniture, panels, etc. will be extremely low, even if the temperature and relative humidity are high, there is no obvious effect!

Therefore, while opening the window for ventilation, the development of indoor air circulation is accelerated and the efficiency of indoor and outdoor air replacement is improved by using the traditional industrial control fan to blow air to the window! This is a quick way to reduce the concentration of formaldehyde in indoor space environments!

In addition, air conditioners can be used to raise the indoor temperature, and humidifiers can also increase the indoor relative humidity. On the one hand, it can accelerate the release of formaldehyde, on the other hand, it can increase the temperature difference and humidity difference between indoor and outdoor environments, and can also improve the replacement efficiency of indoor and outdoor air! But be careful not to close the doors and windows for a long time, otherwise the effect will be greatly reduced!

In practice, you can close the doors and windows for 2 hours, turn on the air conditioner and humidifier at the same time, and then ventilate, and at the same time use the industrial fan as an auxiliary!

If the operation is troublesome, the simple and effective way is to open the windows as much as possible to provide ventilation, so that the indoor formaldehyde concentration is always kept at a low value, which can also speed up the release efficiency of formaldehyde release!