Does the state have inspection standards for finished panel furniture? 5

It can be solved by giving money, and there is no good thing to say that the standard is not standard.

Hello, furniture quality inspection and evaluation standards (1) wood furniture quality inspection and quality assessment. According to the provisions of QB T1951 1 94 "Quality Inspection and Quality Assessment of Wood Furniture", if there are no Class A unqualified items in the inspection results of a single piece of furniture, other unqualified items: no more than 2 unqualified items in Class B, or no more than 1 unqualified item in Class B and no more than 2 unqualified items in Class C, or no more than 4 unqualified items in Class C, the model product will be assessed as a qualified product, otherwise it will be a non-conforming product.

It also stipulates that "each product in the complete set of products shall be rated in accordance with the above-mentioned provisions." When each product is a qualified product, the complete set of products of the model is assessed as a qualified product, otherwise it is a non-conforming product. According to the standard wooden furniture, there are only qualified and unqualified products, and there is no requirement for grade products at all.

The so-called wooden furniture quality grade mark "first-class, first-class, excellent, and special" is not based. (2) Software furniture quality inspection and quality assessment According to the QB T1952 1 94 "Upholstered Furniture-Sofa Quality Inspection and Grading Comprehensive Evaluation" standard, the quality level of sofa and spring soft mattress is divided into: excellent products (i.e., A-grade products), first-class products (i.e., B-level products), and qualified products (i.e., C-level products).

The standard also stipulates that excellent products refer to the basic items and general items in the inspection content should be qualified; One grade B is allowed in the grading program, and the durability item must be a grade A. First-class products refer to the basic items in the inspection content should be qualified; 1 Grade C is allowed in the graded project, Grade B is allowed in the durability item, and 2 Category C failures are allowed in the general item.

Qualified products refer to the basic items in the inspection content should be qualified, and the grading items should reach grade C or above; In general projects, 1 Category B non-conformance and 1 Category C non-conformity, or 3 Category C non-conformities are allowed. "The confirmation of the grade of superior products and first-class products shall be issued by the national inspection center, the full-time inspection agency of the industry or the inspection agency entrusted by the state and the industry to issue the inspection certificate of the physical quality level; The qualified products shall be inspected and judged by the enterprise". This is the standard.

Summary. Solid wood home has two classification standards: "solid wood ratio and technology" and "solid wood attributes".

There are three relevant standards for the definition of solid wood furniture in China: "GB3324-2017 General Technical Conditions for Wood Furniture", "GB T 28202-2020 Furniture Industry Terminology", and "GB T32445-2015 Classification of Materials for Furniture".

Solid wood home has two classification standards: "solid wood ratio and technology" and "solid wood attributes".

The most fundamental thing is to see whether there is a wood-based panel. If there are wood-based panels such as plywood and MDF, it cannot be called solid wood furniture.

The most fundamental thing is to see whether there is a wood-based panel. If there are wood-based panels such as plywood and MDF, it cannot be called solid wood furniture.

Only when the solid wood components reach more than 70% can they be regarded as solid wood furniture.

Inspection standards for wooden furniture.

1. The surface color of each part of the furniture can not have color difference, and the accessories need to be coordinated and consistent with the color plate.

2. The surface should not be rough and there should be traces, oil stains or impurities.

3. Surface marks, scratches, cracks, chips, bumps.

4. The adhesion, corrosion resistance and abrasion resistance of the paint and protective film on the surface of the product meet the relevant requirements 5 ** and the parts that can be touched by the clothes must be smooth, without shards, burrs and nails and other protrusions, and maintain a good sense of touch.

6. The three-dimensional sense of the pattern of the car and carved parts is obvious, the bottom of the shovel is smooth, the transition is smooth, and there are no obvious knife marks and excess wood wire.

7. After the coating of various surface materials, the performance effect of its texture, color tone, transparency, gloss, antique damage and wood grain should be unified and coordinated. There must be no obvious traces of artificiality.