How can I watch TV after the telecom set top box is restored to factory settings

Hello. After restoring the factory settings and turning on the phone again, the system will generally have a setting prompt, and you only need to follow the prompts to operate the general operation.

You have to shoot the box and boot screen for everyone to see, otherwise it won't help you.

1. Press the [Menu] of the set-top box remote control, move the cursor to frame the (system settings) item through the remote control [ key, press the [Confirm] button 2, press the [FN] + [Red] button at the same time, and prompt "Please enter the system setting password" at the bottom left of the TV screen, at this time, enter the "password" with digital health3. Move the cursor to frame the (factory settings) item through the remote control, press the [Restore] key to expand the data: factory settings restore the personalized settings of the device or instrument to the default state of the factory, such as the start interface, standby mode, Operation shortcuts, timing reminders, etc., restore to factory settings but will not delete the stored data, ultra-clear box 1At the same time as the box is powered on (the first three seconds), please keep pressing the left button of the remote control, 2

Use the remote control to adjust to the penultimate item, see RESET, click the OK button to confirm the factory reset: 3Next, choose the fourth-to-last option, which is like yes

Factory settings - encyclopedia.

Pay more attention to your own children.

How to restore the factory settings of the network set-top box:Method 1: Use the remote control to enter the set-top box settings.

Turn on the power, turn on the power switch of the set-top box and the TV, and switch to the set-top box connection page; Press "Menu" on the remote control of the set-top box; Enter the new interface and click "System"; Click "Restore Factory Status" through the remote control; A prompt box pops up, click "Confirm Restore" to finish.

Advantages: Simple and straightforward, anyone can operate.

Disadvantages: If the box card is turned on and cannot enter the system, it cannot be operated.

Method 2: The network set-top box will automatically restore to factory settings.

The network set-top box is shut down and restarted; Immediately after that, click the network set-top box menu button (or back button) without stopping; At this time, the box will enter a factory reset state and automatically restore the factory settings.

Advantages: Factory reset can be operated without entering the system.

Disadvantages: Some boxes do not work with this method.

Method 3: Flash the network set-top box.

Specific steps: Advantages: Basically all boxes can be factory reset by flashing.

Disadvantages: The operation is more professional, and it requires a certain computer and flashing foundation.

Hello: General factory settings, there is a REST key on the back of the back of the machine. Generally, press and hold this button for about 5 seconds to restore the factory settings.

How to restore factory settings of set-top box, super detailed tutorial, come and take a look at it if you need it.

How to restore the factory settings of the network set-top box:

Method 1: Use the remote control to enter the set-top box settings.

Specific steps: 1. Turn on the power, turn on the power switch of the set-top box and the TV, and switch to the set-top box connection page;

2. Press the "Menu" on the remote control of the set-top box;

3. Enter the new interface and click "System";

4. Click "Restore Factory Status" through the remote control;

5. A prompt box pops up, click "Confirm Restore" to complete.

Advantages: Simple and straightforward, anyone can operate.

Disadvantages: If the box card is turned on and cannot enter the system, it cannot be operated.

Method 2: The network set-top box will automatically restore to factory settings.

Specific steps: 1. Shut down and restart the network set-top box;

2. Immediately after that, click the menu button (or back button) of the network set-top box;

3. At this time, the box will enter the factory reset state and automatically restore the factory settings.

Advantages: Factory reset can be operated without entering the system.

Disadvantages: Some boxes do not work with this method.

Method 3: Flash the network set-top box.

3. After the flashing is successful, the factory settings can be restored.

Pros: Basically all boxes can be factory reset by flashing.

Disadvantages: The operation is more professional, and it requires a certain computer and flashing foundation.

Summary. 1. First of all, check whether the TV set-top box is connected correctly, if the correct TV set-top box connection is not established, you will not be able to see the program if you restore the factory settings. 2. Check whether the channels on the TV set-top box have been scanned, if not, please follow the instructions on the manual to scan so that you can see the TV program.

3. Check whether the network connection of the TV set-top box is normal, if there is a network failure, please try to reconnect, or check whether there is an access permission setting, so that you can watch TV programs normally. 4. Confirm whether the access address of the TV set-top box is correct, if the access address is incorrect, it may lead to the situation that you cannot watch TV programs normally. 5. If the above operations cannot solve the problem, you can try to restore the factory settings again, or contact the service provider for inspection and adjustment.

1. First of all, check whether the TV set-top box is connected correctly, if the correct TV set-top box connection is not established, you will not be able to see the program if you restore the factory settings. 2. Check whether the channels on the TV set-top box have been scanned, if not, please scan according to the instructions in the manual, so that you can see the TV program. 3. Check whether the network connection of the TV set-top box is normal, if there is a network failure, please try to reconnect, or check whether there is an access permission setting, so that you can watch TV programs often.

4. Confirm whether the access address of the TV set-top box is correct, if the access address is incorrect, it may be impossible to watch TV programs normally. 5. If the above operations cannot solve the problem, you can try to restore the factory settings again, or contact the service provider for inspection and adjustment.

So why don't you speak.

Is it a sound problem?

1.Confirm that the account information is entered correctly, and try re-entering the account information. 2.

Check whether the network connection is normal, if the network is unstable, it may cause registration failure. 3.Check whether there is a network connection problem with the TV device, if there is, please confirm whether the network equipment is working properly, and try to register the bridge again.

4.Restart your TV and try to register again. 5.

If none of the above solves the problem, you can try to change to a new TV and register for ITMS

There is only this one TV station.

Try logging back into your account.

Then reboot.

How to log in. Restart first, then click on Mine, then log in, and re-enter.

I can't even find a**reboot so I can't press it.**

Then you click directly on that business setting. Login.

1. Unscrew the upper cover of the set-top box;

2. Insert the mobile phone card (GPRS function must be enabled and no arrears must be issued);

3. Enter the system settings, enter the password 9999 (cannot be 0000), and select Restore Factory Settings Huaizheng;

4. Shut down and take out the smart card of your own set-top box, and insert a smart card of the local set-top box;

5. Turn on, when the display position positioning module is abnormal 3, turn off the power supply of the set-top box;

6. Shut down and reinsert the smart card of your set-top box, and turn on the power of the set-top box;

7. Press F4 to scan the base station and return after completion;

8. Shut down and restart, and wait for the set-top box to search for the program.

Everyone"Satellite direct television (DTH) service is a new live satellite radio and television service organized and implemented by the State Administration of Press, Publication, Radio, Film and Television in order to implement the spirit of the leadership's instructions and solve the problem of the masses in rural areas being unable to listen to and watch radio and television for a long time as soon as possible.

Everyone"Satellite direct television (DTH) service is a new service of live satellite radio and television organized and implemented by the State Administration of Press, Publication, Radio, Film and Television in order to implement the spirit of the leadership's instructions and solve the problem of the masses in rural areas being unable to listen to and watch radio and television for a long time as soon as possible.

The public within the service area can be purchased voluntarily"Everyone"Receiving facilities, free of charge Kuanmingshan to watch the 1st to 16th sets of TV stations, 1 set of satellite TV programs in the province, 1 set of China Education Television Station and 7 sets of ethnic minority TV programs, as well as 13 sets of ** people's radio station programs, 3 sets of China Radio International programs and 1 set of radio programs in this province.

1. Turn on the power switch between the set-top box and the TV, and use the remote control to switch to the set-top box connection page.

2. Then click "Menu" on the remote control of the set-top box to enter the system settings.

3. Go to the next submenu "Settings" page and select "System".

4. Click "System Settings", move the desired position by pressing up, down or left on the remote control, select the factory settings, and click "OK" with the OK button of the remote control.

5. Then a prompt box will pop up. Click "OK" with the remote control to decide whether to restore the factory settings or not.