The shared printer was still available yesterday, but today the RPC server is unavailable

Re-network (ID), right-click on the computer, Properties, Computer Name, Network (ID).

To resolve this issue:

1.Copy and file from other Windows NT servers or workstations to the %SystemRoot% folder on the affected computer.

2.Apply or reapply the most appropriate Windows NT service pack and restart the computer.

3.Set to automatically start the Remote Procedure Call (RPC) service: aClick Start to point to Settings , click Control Panel , and then double-click Services.

b.In the list of services, click the Remote Procedure Call (RPC) service, and then click Start .

c.In Startup Type, click Automatic, and then click OK.

4.Restart your computer.

Check if it exists, and if not, copy it to someone else.

1. Open the control panel (the system version is slightly different) and find the service.

2. Find the print spooler in the service list, and find that this one is not started (not running).

<>4. The service also checks whether the remote procedure call (rpc) and server are started (automatic), and this must also be started (automatic).

5. You can also use win+r (run) to enter the service) to open the service (other steps are the same as above).

6. Generally, this can fix the printer when the RPC server is unavailable.

What causes the RPC server to be unavailable?

The RPC (RPCremoteProcedurecall) service does not start properly. Start by clicking Settings Control Panel Management Tools service and find it"remoteprocedurecall(rpc)", double-click to open, in"Startup type"to choose"Automatic", click OK; Run msconfig and select "Normal Startup", and all services, including RPC services, will be loaded; Select "Selective Startup", you must check the "Load System Services" option to ensure that the service loads when it starts, and finally restarts the computer.

Sometimes the unavailability of the RPC server is also caused by a virus, and the once well-known shockwave is the use of RPCs to carry out attacks.

The unavailability of the RPC server and the unavailability of the RPC server are likely to be caused by the shock wave and ** wave. It has been proved through testing that the "RPC server is unavailable" may be caused by the shock wave and ** wave. Although this is a very old virus, there are still a small number of users who have not upgraded the system, resulting in the "RPC service unavailable" situation.

A computer that has been subjected to a shockwave may experience the following symptoms:

1. System resources are tight, and the application runs at an abnormal speed.

2. Word, Excel, PowerPoint and other software cannot run normally.

3. The system restarts for no reason, or automatically restarts after the "system shutdown" warning prompt pops up, etc.

The latest version of Kingsoft Poison has 3 built-in engines, that is, Xinyun Kill Engine + Local Blue Core II Engine + System Repair Engine. The Blue Core II engine is responsible for efficient local scanning, the trusted cloud scanner is connected with the cloud to identify unknown files, and the system repair engine repairs the system damage caused by poisoning. 3. The engines work together to not only perfectly prevent viruses, but also completely restore the damage caused by virus Trojans while removing viruses.

Hello Pro, RPC (Remote Procedure Call) server unavailable error is usually caused by network connection issues or the RPC service is not started. Here are some possible workarounds:1

Check the network connection: First, check if the network connection between the printer and the computer is working. You can try restarting your router or adjusting your network settings.

2.Start RPC Service: In the Windows operating system, the RPC service is required.

You can start the RPC service by following these steps: Open the Services window (which can be found in the Control Panel), locate the Remote Procedure Call (RPC) service, and make sure the service is started. 3.

Restart the printer: Sometimes, restarting the printer can resolve the issue. Turn off the printer, wait a few minutes, and then restart.

4.Update the printer driver: If the printer driver is outdated or corrupted, it can cause an error that the RPC server is not available.

You can try updating the printer driver. 5.Check your firewall settings:

Firewalls may block RPC communication. You can try turning off the firewall temporarily and then try rubber printing. If none of the above methods can solve the problem, it is recommended to contact the printer manufacturer or computer repair professional for further inspection and repair.

The specific operation method of the printer prompting that the RPC server is unavailable is as follows:

1.First, double-click to open My Computer, find the Manage option and double-click.

2.At this point, you will come to the computer management interface, and you can see that there are three big options, and the one that needs to be set up today is [Services and Applications].

3.We double-click on it, and we can see two small options, and we can double-click on the [Service] option.

4.Then, after entering the service list, find the [Remote Procedure Call (RPC)" option in the service list, as shown in the following figure. The reason why the RPC server is unavailable is that the service is not started, now we can see if it is disabled, if so, we enable it.

The service is a service that is often used, if it is manually started every time you use it, it will be more troublesome, you can set it to automatic, we double-click this service, and then select [Automatic], click [OK]. As shown below:

RPC server refers to Remote Procedure Call Protocol, Chinese interpretation is (RFC-1831) Remote Procedure Call Protocol: a protocol that requests services from a remote computer program over a network without the need to understand the underlying network technology.

This is because you didn't start the printer's service. Solution: Go to Control Panel - Management Tools - Services and turn on the corresponding service.

The installation and use of printers in Windows XP relies on the following services (full association services):

ntlmsecuritysupportprovider

portablemediaserialnumberservice

printspooler

remoteprocedurecall(rpc)

remoteprocedurecall(rpc)locator

server

You can check whether your system is closed (not started) the above services, if the local printer driver is installed, the problem can be solved normally after starting the above services, if it is a network printer, you need to open a suitable port to solve the problem.

To give another way, right-click on my computer-management-services-applications-services and services to find the remoteprocedurecall(rpc) service to start this service. See if printspooler starts, and if you don't have the words, start it.

Try the method given, and you should be able to solve the problem.

Hello dear, glad to answer for you: The error message that the RPC (Remote Procedure Call) server is not available is usually caused by a problem with the communication between the printer and the computer. Here are some possible workarounds:

1.Check the printer's network connection for a hill of seepage. Make sure that the printer is on the same network as the computer and that the network connection is working.

2.Restart your computer and printer. Sometimes, restarting your device will fix the problem.

3.Check that the printer driver is installed correctly. If the driver is not installed correctly, it can lead to an error that the RPC server is not available.

4.Disable firewalls or security software. Sometimes, security software may block communication between the printer and the computer, and disabling firewalls or security software may resolve the issue.

5.Try using a different printer driver. Sometimes, using a different printer driver can solve the problem.

If none of the above works, you can try reinstalling the printer driver or contacting the printer manufacturer's technical support.