A senior freshman, he has the idea of going to Germany to study and study machinery, and he hopes th

1。These two universities are still good, I only know that some schools have programs, the kind of programs that can go abroad, and those programs are more expensive than applying by yourself, and the threshold is generally relatively low, and then the two schools make some money As for exchange students, I don't know very well My suggestion is to apply by yourself At least the range of choices is larger

The cost depends on whether you are in East Germany or West Germany East Germany is cheaper West Germany is slightly more expensive The first year of language study, the living expenses are about 100,000 After being admitted to the school, you will be able to do it in case of a year Even if you charge tuition, the tuition fee in Germany is also very cheap 10,000 yuan a year It is very cheap compared to other countries There is also a registration fee

2。If you want to study in English, you can prepare for TOEFL or IELTS before applying, but I personally do not recommend teaching in English, because they are basically liberal arts majors, and the range of mechanical choices is small and it is not easy to apply

If you apply for German teaching, time is tight Now it is recommended to find a big reputable agent to help you The specific process can ask them (the agent I found) If you don't want to find an agent, first learn German Translate your own materials (to translate into German, not English, you will find that German is good when applying to the school) and then make an appointment for review Prepare for the audit During this period, you can check the information of the school Determine the school and major you want to go to After the review, you can apply But with your current German foundation, you can only apply for language classes You can only enter the school after passing the exam

The best mechanics are, of course, Aachen, second only to MIT in the world, and tum... The schools in tu9 are very good, you can go again, I don't know which schools

3。I am a student of automobiles, I think it is okay to be employed now, if you don't want to get a job, go abroad, Germany, the United States is more ideal, but the United States not only has to take the TOEFL GRE and the cost is relatively expensive, so Germany is more cost-effective Other countries Britain, Canada, Australia I think it should be the liberal arts are more dominant, Japan, it's okay, but I don't like it

I basically know that, I hope it helps

Ask an agent. I think it's not bad to study abroad in Australia. My younger brother also studied in the Netherlands.

German basic is 0??

The cost of living in Germany is very expensive, and that's quite expensive.

Wan can only live in the garage and eat instant noodles, if you think about the car aspect.

UK coventry is very strong.

3rd in Europe and 1st in the United Kingdom

Jaguar Landrover Ford has partnered with schools.

It is a good choice to go to Germany by studying mechanics.

The two universities you mentioned don't seem to be very well-known in Germany, and the recognized schools with better mechanical majors include the Technical University of Aachen, the Technical University of Muenchen (Tu Muenchen), the University of Darmstadt (tu Darmtadt) and so on. It is recommended to apply, and there is also a choice.

As for your language, CET is not recognized by German universities, if you apply for English teaching, then you need to pass the TOEFL or GRE (I don't know which one exactly, but German universities** will have introductions). It is also important to note that most university majors are based on German, and if you are ready to start learning German with a zero foundation, you will have to pass the DAF exam (GRE equivalent to English) or DSH (a credible language qualification test run by German universities).

My suggestions: 1, take the German route, first apply for a zero-based German class in China, learn enough 800 hours (a necessary condition for applying to a German university), during which you graduate from university, and the German class hours exceed 400, go to participate in the APS audit, it is estimated that with your German level at that time, there should be no problem to pass (I went after 600 class hours, and passed at one time).

2. After getting APS, and your German class hours have reached 800 or above, there are two options:

Option 1: If you are already confident in your German foundation, you can apply directly to a German university, of course, you have to apply for a German university language course or DSH exam.

Option 2: Take the DAF exam in your home country and apply to university after you pass it.

After the first two steps, you should have successfully landed in Germany.

As for tuition fees, many states have begun to charge tuition fees, such as Baden-Württemberg, Bavaria, etc., and tuition fees generally range from 500 to 650 euros per semester. There are also some states that do not charge tuition fees, such as Thuringia, Hamburg, etc. The cost of living is 5,60,000 yuan a year, and it is even less if you save money.

Personal advice: choose Sheraton.

Although on the surface, Pizza Hut is a reserve manager, but after all, it is a restaurant, and you should have limited learning, and it is difficult to talk about the future development.

Although Sheraton is a clerk, it is a 5-star hotel after all, you can learn a lot, and you can also get a good job in each 5-star hotel in the future, of course, it depends on your personal personality and academic expertise.

In short, both jobs will improve your interpersonal skills, and in the end, you will have to choose for yourself.

I think Pizza Hut is better.

GROB machine tools are German, in the field of auto parts manufacturing, especially in the field of engines, occupy a large market share, almost all internationally renowned car factories are GROB customers.

Mazak machine tools are Japanese, there are many models, belong to general equipment, and the customer base is very wide.

Personally, I prefer German GROB, which is ahead of Mazak in terms of machine tool manufacturing technology, and its customer base is more high-end than Mazak, and its development potential and treatment are also better than that of German companies.

If you use the analogy of two cars, Grob is like a Mercedes, and Mazak is like a Toyota. I recommend GROB.

These two machine tool factories are standardized production, for undergraduate graduates, in such an enterprise to improve the personal ability will not be very fast, if you are interested in the machinery industry, you can go to some small and medium-sized technical enterprises to exercise for 3-5 years, personal ability to improve and then jump to GROB or MAZAK such a large enterprise, the development of the individual will be better.

If you were to choose between GROB and MAZAK, I would recommend going to MAZAK first, because Japanese companies are doing better in terms of management, and GROB is relatively chaotic.

Mazak, because it is the world's No. 1 machine tool sound field manufacturer, and its popularity in China far exceeds that of GROB, many high-end processing plants can be seen, and the products are diversified, and there are more customers than GROB.

Of course, there are a lot of concerns when you just graduate, but you don't have a high position for you, and it is not difficult to be an ordinary technician, as long as you work hard for a few years and take some qualification exams, it is possible to say that technicians and even engineers. The key depends on what you want to learn; If you want to learn management and want to be promoted in the future, you will go to a large factory, and if you want to do a good job in technology, a large factory and a small factory are almost the same, of course, I mean the kind of small factory with a certain scale. Nowadays, factories are reluctant to spend money to make money, so they recruit people with work experience when recruiting employees.

It is difficult to find a job in a large factory, but it is easy to find a job in a small factory; Therefore, it is recommended that you go to a small factory to do a few years (generally about three years of contract), and then it is easier to change jobs to a large factory after getting work experience.

If you are a local in Hefei, you can find a job locally through relatives and friends, and post on the Internet to find a job much faster.

I'm in a major with you, graduated in '09. I suggest that you go to a small factory to apply for a technician first, because once you do a position you don't like, you want to change jobs or focus on the position you do, and you still have no experience when you transfer to other positions, which is easy to form a vicious circle. Even if the salary is low and tired, you must persist for half a year to a year, once you have experience in this area, it is easy to apply for success in other companies.

Now the company recruits people only to see if you have relevant work experience, the others are secondary, don't expect to make money in the first two or three years of doing machinery, it is a precipitation, learning the ability of the stage.

Hello, it doesn't matter if you work as a general worker for a while. Now that the graduation project is almost finished, we will start the graduation defense in May. Your major is mechanical design and manufacturing and automation, I feel that this major is mechanical manufacturing, real design and automation is just to have some contact and learn some basic concepts.

Most of this major is engaged in the manufacturing industry, and there are relatively few real undergraduates who enter the design unit.

According to your situation, the following is for your reference:

1. The first two years of graduation are mainly internships and experiences, more knowledge, salary is not very important at this stage, of course, it is also a good thing to get a high salary after all. Don't think about the difficulties, just like the college entrance examination, you have crossed the single-plank bridge, it doesn't matter, identify your goal and cheer. Being a technician requires some basic skills:

If you do machining or design: three-dimensional modeling, conversion, process card, inspection guidance card, CNC programming, fixture design, material properties, heat treatment process, etc., these must do some practical mastery, not necessarily all very proficient, but must understand some.

2. Large companies are more refined, you may go in to do technology, even if it is a fresh graduate, the regular point will be given to the master or give the internship opportunity, this internship is mainly the company's product and process line internship, if the master does the process, take your own start is also to prepare the process, For example, a product: blanking (sawing machine) - general milling--- slow wire --- machining center--- grinding machine--- heat treatment--- correction--- fine engraving word --- electric polishing------ sandblasting--- grinding --- final inspection--- marking--- passivation--- cleaning --- packaging and warehousing, which as a real product engineer needs to know the knowledge and process is more extensive; If the master is doing CNC programs, then you go in and start to learn the program, of course, this company will arrange according to your own needs and your strengths, or it may be a professional engineer or product engineer;

3. Small companies also have benefits, that is, they have a more comprehensive mastery, and they may design the fixture process, turning, milling, planing, grinding, drilling, and welding, so that they can grow faster, so don't escape from small companies. If you do it in an auto parts company, you will have more contact with advanced process planning and engineering standards, and learn more about APQP PPAP FEMA MSA SPC and other TS quality system related things, which will be very helpful for you to go to auto parts processing and process analysis in the future.

In fact, the specific job after graduation has a lot to do with your personality and preferences, and another point is your network. With the accumulation of experience, you may have wanted to be a design engineer at first, and later became a manufacturing engineer or a quality engineer. It's all possible.

Hope it helps, good luck!

Brother, I am a factory electrician, I am very pleased with your goal of learning technology, let me tell you a point, that is, to find a job around technology, no matter the size of the company, no matter the salary, as long as it is close to what you have learned, it is okay, let yourself suffer for a few years first, remember, do not let the position, job title, etc. become your burden. This is how I feel, I feel it myself.

First of all, you didn't finish your job, many manufacturing companies (automobiles, refrigeration, heavy industry, etc.) are going down to the workshop, in addition to the company that really only wants your labor, other companies will still consider letting you do technology, and I don't know the direction of your school's major, a lot of people who learn machinery may not necessarily be engaged in mechanical design, but research and development does not let you do it, are given to graduate students and doctoral students, if you want to do technology, find a better company to stay for a few years, the division of labor is what you look at outside, in fact, you know when you go in, It's not that formal, and a lot of things are bypassed. Experience and job titles are a must, there are too many mechanical things to learn, and you will be able to master this field after a few years.

I am also studying machinery, I am about to graduate this year, and now I am interning in a hardware factory, my plan is to continue to stay for a year or two after graduation, because I have seen the recruitment of more than 2 years of work experience, at least one year, how to learn machinery will graduate to you as a technician, people will rest assured?

If you like mechanical design, don't leave the machinery industry, a small factory is a comprehensive ability to exercise, and a large factory is more single. There are pros and cons.

You can come to Suzhou to see, practice more, don't let your thinking imprison you, now in Suzhou.