Dell Server R710 Tech Specifications for Dell PowerEdge R710

Server Processor: Intel(R) quad-core E5504 Xeon(R) CPU, 4M cache, QPI up to GT seconds.

Memory: 4GB memory (2x2GB), 1333MHz dual-ranked RDIMMS for 1 processors (18 slots).

Supports up to 6 inches of hard disk).

raid 1

Comes with 2 dual-port Gigabit LAN cards.

You can choose to add products, various network cards, hot-swappable redundant power supplies, redundant fans, external storage, backup Dell server R710 configuration can be customized according to user needsDell server R710 after-sales service: 3 years IT professional support and key tasks: (5x12) 4 hours on-site service.

Two disks of different capacities are used as RAID1, whichever is the minimum capacity, or they can be used separately as RAID0.

How to do the array:

1. When you boot up, you can press Ctrl+R, enter the interface of the array card, and then manage the disk, and then select it in VD

mgmt menu (you can switch the menu by ctrl+p ctrl+n), press f2 virtual disk to create a menu.

2. In the virtual disk creation window, press the Enter key and select "Create".

new vd.

3. Press Enter in the RAID Level option, select the RAID level, two hard disks with different capacities will also be displayed below, select the RAID level that needs to be configured (use the tab key to select the hard disk, press the space bar to have X logo for the selected hard disk, and select RAID 1 for two disks, we take RAID 5 as an example).

4. AdvancedSettings (advanced settings do not need to be selected), use the tab key to select initialize and press the spacebar to select.

5. Press the Tab button, move the cursor to OK, press Enter, it will prompt that if it is a new array, it is recommended to initialize it, press Enter to confirm to continue.

6. After the configuration is completed, it will return to the main interface of VD MGMT, and the RAID will be ready.

7. Move the cursor to the virtual disk 0 in the figure, you can see the virtual disk information that has just been configured, press the esc key to return to the main interface after viewing, and then press the esc key, select OK to save and exit.

Is it a PERC 6i card? Or a card for H700?

Boot CTRL+R to enter the disk array configuration page.

300G two blocks selected to do RAID 1

4 blocks of 2T are selected for RAID5

300G RAID 1 is used as the system disk, and RAID 5 6T or so is used as storage.

The Dell Server R710 offers a significant improvement in system management, simplifying system management software, providing enhanced operations and standards-based commands that can be integrated with existing systems for effective control. Relieving the workload of managers, the Lifecycle Controller is an engine for advanced systems management integrated into the server. It simplifies the administrator's task by utilizing an intuitive interface known as the Unified Server Configurator (USC) in the pre-OS loading environment to perform a full set of configuration functions, such as system deployment, system updates, hardware configuration, and diagnostics. This eliminates the need to use and maintain multiple dispersed CD*** media.

The new Dell Management Console, powered by Symantec's Altiris technology, provides a single view and common source of truth for the entire infrastructure. Dell Management Console is based on Symantec?The management platform is based (formerly based on Altiris Notification Server) and is a modular, easily scalable foundation that can provide basic hardware management capabilities, or more advanced capabilities such as asset and security management.

Dell Unified Server Configurator allows access from a single access point to enable secure, efficient and user-friendly infrastructure management. The tool is embedded and integrated into the system to provide fast and continuous access, as well as superior flexibility and advanced features. The USC tool provides built-in driver installation, firmware updates, hardware configuration, and diagnostics to address all aspects of operating system deployment.