Mercury MW300R bandwidth control

First set a fixed IP by yourself, find a MAC address to bind the IP, bind your MAC address to the IP, and then set the range of QoS to be limited to prevent some people from changing the IP by themselves and breaking your QoS, anyway, everything else you use is included. Then it is modified to limit the maximum bandwidth, you use 4m, which is your 4096kbps, and you give them 200k per person, which is equivalent to their 20k **speed, that is, fill in 200 for the bandwidth size behind, and there should be an upload bandwidth size behind it, you set a 50k. It's more than enough to go to the web page in this way, but don't think about what to see**,**ah and so on.,They don't pay.,It's time to be satisfied if you can get on the web page.。

As for the speed limiting software, it's useless.,A computer with a 360 installation is not afraid of this kind of software at all.。

I've played with this thing, ms you gave them too much. And I once gave someone two hundred, and my 1000+ Internet access was still stuck to death, so it was OK to unplug that person's network cable. This thing doesn't seem to have a lot of effect on P2P**.

The speed is limited, and you have to look at the data packets. The packets are still high to death.

It's better to negotiate a solution. The internet fee is yours to pay for. They don't promise, don't let them use it, just do it! To watch a movie to youku, tudou to see.

2. Enter the correct username and password to enter the router management background.

3. We need to check the existing IP and the corresponding MAC address bar first. Click "DHCP Server" on the left, select "Client List", and write down the corresponding IP and MAC addresses displayed on the right.

5. Enter the correct corresponding MAC and IP address on the right, then select "Status" as "Effective", and then click the "Save" button to save.

6. Repeat the previous two steps until all IPs are added.

7. Click the "IP Bandwidth Control" link on the left, check the "Enable IP Bandwidth Control" checkbox on the right, and select the correct network speed below.

8. Then fill in the IP and bandwidth size to be controlled in the following rules, and also set your own computer "Guarantee minimum bandwidth", and select "Enable" for all, and then click the "Save" button to save all the settings.

If DHCP is not enabled, a static IP address is set for each computer.

If you enable bandwidth control, the total uplink bandwidth is 512 kbps, and your downlink network is 8 Mbit/s, write 8,000 for 8M, and write 10,000 for 10M.

Fill in the IP address range before and after the IP address segment of the machine you need to limit the speed, the port segment is 1-65534, the protocol is all, the priority remains the same, the uplink is 512kbps, the downlink you want to limit the speed is 800kb s, then write 6500kbps, the front and back two can be filled in the same, and the route can be restarted after saving.

1. Turn on all the computers that need to access the Internet, select static address assignment, and specify IP addresses for all devices.

2. Turn on the broadband control. Widen the new entry, and set the maximum downlink bandwidth of 2400 for the IP addresses of other devices except the host, because the unit is about 8Kbps because the unit is 1KB

3. Save and restart the router.

Mercury MW310R Set Bandwidth Control Method:

1. Enter the router management IP in the browser, default, press enter;

2. Enter the router administrator account and password, click OK, and the default is admin;

3. Click the "IP Bandwidth Control" link on the left, check the "Enable IP Bandwidth Control" checkbox on the right, and then enter the actual downlink bandwidth and downlink bandwidth of the user's broadband.

4. Click to add a new entry, which belongs to the IP address access to be restricted, just enter the last set of numbers, select the mode to limit the maximum bandwidth, and enter the maximum value of the limit after the bandwidth size;

5. You can add multiple rules repeatedly, and finally click the "Save" button to save the settings.

Ordinary routing and software do not have much effect even if the speed is limited, the key is to solve the main application under a variety of applications is not affected, so you had better change to an intelligent QoS route, although the ordinary route can limit the speed, but can not guarantee the delay of the game, the browsing of the web page, because to do**game web browsing does not interfere with each other, simple speed limiting is not enough, but also to set up a guarantee bandwidth, limit the maximum number of connections, turn on burst traffic, set priority, set the game port priority, turn on small packet sending** Priority and so on. Generally, these functions can only be achieved by intelligent QoS routing. It is recommended that you buy an intelligent QoS behavior management route, and you can even directly block others from watching**,**etc.