What are the precautions for installing air conditioning in a new house?

Air conditioning is installed in the new houseThe most important thing is safety, followed by comfort and aesthetics, then to do the above three points, there are the following precautions:

Maintain wall security。When we install air conditioners, we should pay attention to the safety of the wall, whether the wall falls off and whether the circuit arrangement is reasonable. In addition, it is best to equip the socket of the air conditioner with a switch, which not only ensures the safety of the use process, but also saves energy and electricity when the air conditioner is idle, and is convenient to cut off the power supply to the air conditioner.

The position of the outdoor unit of the air conditioner should not be too close to the internal unit, otherwise when the air conditioner is running, the internal and external units will maintain the same frequency vibration, which will cause loud noise and affect our normal rest and entertainment activities. <>

Choose the right location。The air conditioner should be installed at a suitable height, and the hang-up unit in the bedroom will generally be installed in a slightly higher position, and should be slightly inclined outward, so that the air conditioning water can flow down the pipe to the outside to avoid the air conditioning water dripping indoors. The installation of air conditioning should also avoid facing the bed or door in the bedroom, if you have been blowing in front of the air conditioner when sleeping at night, it is easy to cause rheumatism, colds and other health problems, and if it is facing the direction of the door, then frequent entry and exit will affect the normal operation of the air conditioner.

If it is a vertical air conditioner in the living room, it should be installed in a relatively open position, generally in the corner of the living room, which will not affect people's frequent movement and will not destroy the unity of the home style. <>

Try to avoid distractions。There may be a certain amount of mutual interference between electrical appliances, so whether it is the air conditioner in the bedroom or the air conditioner in the living room, the influence of the surrounding electrical appliances should be taken into account when installing, such as TV, wireless broadband, etc., try not to install air conditioning near these electrical appliances, although in general these effects are very small, but in order to be more worry-free in the future, we should try to avoid this situation when installing. <>

The decoration of a new house is a very troublesome thing, and it is indispensable to take painstaking effortsOnly by paying more attention to the details can you do it once and for all

There should be no obstruction in front of the indoor air conditioner to ensure the jet distance of the shower of cold air, and the installation height of the general air conditioner should not be less than one meter, between one meter and two meters.

1. Determine the installation location, do not face the door or bed, this is not good for the body. 2. There should be enough space to maintain good heat dissipation in the front and rear of the air conditioner, otherwise it will be easy to break. 3. After the air conditioner is installed, it should be tested to prevent freon leakage.

Wait, pay attention.

The first point is to pay attention to whether there is a special socket for the air conditioner in the room, the second point is to see whether the hole of the air conditioner and the external unit connection pipe is in the first place, the third point is to observe whether the external unit is placed, the fourth point is to observe the special socket of the air conditioner, and the fifth point is to observe whether the bracket of the air conditioner is firm.

First of all, pay attention to whether the air conditioner model is the one you selected before, prevent the style and power from not being suitable, check whether there are any reserved holes in the home, and pay attention to the installation cost.

The most important thing to install air conditioning in a new house is safety, followed by comfort and aesthetics. When installing the air conditioner, it is necessary to pay attention to the safety of the wall, whether the wall falls off, and whether the circuit arrangement is reasonable.

The outdoor unit of the air conditioner must be hung on the outside of the new house, and then install some protective measures to protect the outdoor unit of the air conditioner, so that you can protect your own outdoor unit of the air conditioner and ensure better safety.

The main points to be paid attention to in the newly installed air conditioner include preventing refrigerant leakage, choosing a reasonable installation location of indoor and outdoor machines, and preventing air conditioner water leakage, as follows:

What to pay attention to when installing a new air conditioner.

1.Newly installed air conditioners should pay attention to prevent refrigerant leakage. Refrigerant is very important for air conditioning, only when the refrigerant inside the air conditioner is sufficient, the air conditioner will heat or refrigerate normally, if the new air conditioner is not careful, resulting in the air conditioner leakage, it will be very troublesome to deal with.

2.For new air conditioners, you should choose a good indoor unit for air conditioners. When installing the air conditioner, it is best not to let the indoor unit face the bed, although you can buy the air conditioning wind shield now, but if the conditions allow, we still have to choose a relatively better indoor unit installation location, so that it will be much better to use.

3.The location of the outdoor unit should also be selected for the new air conditioner. If the outdoor unit is in a very closed position and the heat dissipation is particularly poor, we will find many problems when using the air conditioner, so we should try to choose a better position, especially pay attention to the problem of nearby blocking.

4.When installing a new air conditioner, we should also pay attention to preventing indoor and outdoor water leaks, especially indoor water leaks. Indoor water leakage of air conditioners is a very common problem, and when installing air conditioners, it is important to ensure that the condensate in the air conditioner can be drained to the outside of the room.

The above are the things to pay attention to when installing a new air conditioner.

After the installation of the air conditioner, it is necessary to let the installer test the air conditioner connection port to prevent Freon leakage, otherwise the refrigeration effect of the air conditioner will be greatly reduced

To prevent rainwater from pouring back into the room through the wall hole, during the installation of the air conditioner, it is necessary to make a slightly higher wall hole indoors. After the installation is completed, the void of the wall hole must be plugged with putty, and if the drainage hole in the corridor is used, a similar problem should be noted.

To prevent indoor water leakage and ensure that the condensate generated by the air conditioner during refrigeration can be discharged to the outside, you can pour a little water into the water tray of the air conditioner during installation to check whether it can be discharged to the outside.

Air purification: The air contains a certain amount of harmful gases such as NH3, SO2, etc., as well as various odors such as sweat odor, body odor and bathroom odor. Air conditioner purification methods include: fresh air, filtration, adsorption and absorption by using activated carbon or photocatalyst, etc.

Fresh air: The fan system is used to discharge the indoor humid air to the outside, so that the indoor negative pressure is formed to a certain extent, and the fresh air enters the room from the surrounding door cracks and window cracks to improve the indoor air quality.

Photocatalyst: It can be regenerated under the irradiation of light, and the adsorbed (received) ammonia, nicotine, acetic acid, hydrogen sulfide and other harmful substances are released and can be reused.

Check to see if there is a large abnormal noise when the host is running.

Be sure to clean the dust on the air conditioner filter before use.

Soak the filter with disinfectant solution to disinfect it.

If possible, it is best to use a vacuum cleaner to dust the indoor fan before use.

Open the window for ventilation for a quarter of an hour when you turn on the machine every day, and ventilate it for more time when you use it for the first time, so that the bacteria, mold and mites stored in the air conditioner can be dispersed as much as possible.

Disinfect the air conditioner filter frequently.

Do not turn on the air conditioner indoors for too long, and it is best to open the windows frequently for ventilation to reduce the concentration of toxic gases in the room and inject fresh air regularly.

It is necessary to pay attention to adjusting the temperature difference between indoor and outdoor, generally no more than 8 to 10.

Smoking is strictly prohibited in the room.

Pay attention to the air conditioner when it is running, do not spray pesticides or volatile liquids on it, so as to avoid accidents caused by electricity leakage.

1. Socket and switch.

When the air conditioner is not in use, the plug can be unplugged, but the socket of the general air conditioner is relatively high, and it is more troublesome to pull the plug and there is also a certain danger. Therefore, you can choose an outlet with a switch as an outlet for the air conditioner, which will be safer and more convenient. The socket should be close to the wall where the air conditioning hole is located, the general air conditioning line will not be very long, the air conditioner is installed in the upper half of the wall, and the socket of the air conditioner should also be placed in that position as much as possible.

2. Air conditioning location.

Many families do not carefully consider the location of the air conditioner when installing it. When in use, the incorrect installation position of the air conditioner will cause a certain impact on people's health, which can easily cause stroke diseases. For smaller bedrooms, no matter how you adjust the position, the air conditioner will be more or less facing the bed.

In this case, it is necessary to pay attention to the choice of air conditioner with sleep function and good silent effect when purchasing.

3. Air-conditioned hole.

The air-conditioning hole in the wall of the air conditioner is often overlooked, thinking that it only needs to be opened so that the pipeline can pass through. But in fact, when playing the air conditioning hole, it is necessary to pay attention to the outward inclination, that is, "low on the outside and high on the inside", which can prevent the air conditioner from backing up water into the house when it is in use.

4. Don't change the wires at will.

Do not change the wires at will, and do not increase the power of electrical appliances, so as not to increase the electrical load and form a risk situation of wires and electrical appliances. When using, be sure to pay attention to the safety of electricity.

5. Check the air conditioner after it is ready.

After the air conditioner is installed, check whether it can be used normally and check whether there is any problem with the device.

Plug in the power cord and turn on the air conditioner to see if it can be turned on normally, and whether the heating and cooling forms can be used normally. Whether the air outlet of the air conditioner is normal, and whether there are any strange sounds and noises. After opening it for a while, check to see if there are any water leaks in various parts of the guard.

Precautions should be taken when installing air conditioning: pay attention to safety when working at height; The bracket must be fixed and stable; The connecting copper pipe between the internal and external machine cannot be bent; The installation of the air conditioner unit should be inclined in the direction of the outlet of the drain pipe.

The details are as follows: 1. When installing air conditioners, we must pay attention to safety, especially for high-altitude work, and we must strictly follow the installation rules when installing, wear safety ropes, and be equipped with protection personnel.

2. The bracket for air conditioning installation must be fixed and stable, and the fastening bolts must be tightened when installing the external unit, and the test must be carried out after installation.

3. When installing the air conditioner, the copper pipe connecting the internal unit and the external unit should not be bent to avoid the copper pipe breaking and leaking fluorine, resulting in the air conditioner being unable to refrigerate.

4. The installation of the air conditioner should be inclined to the outlet of the drain pipe to avoid the condensate of the drain pipe from being unable to be discharged and backflowing, resulting in water leakage of the indoor unit.

In fact, it is relatively simple to install the air conditioner, and it is recommended that it is best to be completed by a professional installation staff, so as to avoid accidents or failures that cannot be handled by yourself, and the air conditioner is easy to leak if it is not installed well.

Whether it is a newly purchased air conditioner, or an old air conditioner to relocate and reinstall, you need to pay attention to some things during installation, in order to ensure that there will be no problems in the future use of the air conditioner

1. The installation position of the indoor unit of the air conditioner should not be too low, because according to the principle of air flow, the cold air is going down, so if I put the state of the indoor unit too low, it is not conducive to the diffusion of cold air in the house during refrigeration, resulting in slow refrigeration and poor cooling effect.

2. When installing the outdoor unit of the air conditioner, the fuselage should be kept at a certain distance from the surrounding walls or obstacles, so as not to affect the heat dissipation effect of the compressor in the future. Moreover, the outdoor unit must be placed horizontally when installed, and the outdoor unit must be fixed with expansion screws to prevent the danger of falling.

3. When installing the indoor unit of the air conditioner, it is necessary to ensure that the exposed end of the water pipe is slightly lower than the other end, so as to ensure that the condensate generated during future use can be smoothly discharged from the pipe.

4. The distance between the indoor unit and the outdoor unit should be as short as possible, because if the distance is too long, the connected copper pipe will be too long, resulting in the cold air generated by the outdoor unit attenuating too much in the process of conveying to the indoor unit, which is also a major reason for the poor refrigeration effect of air conditioning.

Dear Hello, I am happy to answer for you, the following is the answer for your query, I hope it will help you When you buy a new air conditioner, you need to pay attention to the following points: 1Installation Location:

Choose a suitable location to install the air conditioner, ensure that the length of the duct between the indoor unit and the outdoor unit of the air conditioner meets the regulations, and there is enough space for the outdoor unit to dissipate heat. 2.Power Requirements:

Make sure there is enough power supply** near the installation location to meet the power demand for the air conditioner. At the same time, it is necessary to ensure the safety and reliability of the power supply line and avoid overload or short circuit of the wire. 3.

Installation height: According to the installation instructions of the air conditioner, determine the installation height of the indoor unit, which is generally recommended to be more than 2 meters above the ground to obtain a better cooling distribution effect. 4.

Drainage pipes: Indoor units need to connect drainage pipes to ensure smooth drainage and avoid water droplets dripping indoors. 5.

Installation angle: The installation angle of the outdoor unit should meet the requirements to ensure the smooth flow of refrigerant and drainage. 6.

Safety protection Zen liquid: When installing the air conditioner, it is necessary to ensure that the indoor and outdoor units are firmly fixed to avoid the equipment falling off or being damaged due to vibration or other reasons. 7.

Air conditioning pipes: During the installation process, pay attention to protect the air conditioning pipes to avoid damage or bending to ensure the smooth flow of refrigerant. 8.

Installation and commissioning: After the installation is completed, be sure to debug to ensure the normal operation of the air conditioner, and check whether the temperature, wind speed and other functions are normal. 9.

Cleaning and maintenance: After the installation is completed, the indoor and outdoor units are cleaned regularly to remove dust and debris to maintain the normal operation and service life of the air conditioner.