How to make your phone fast and damaged without damaging the appearance

N's mobile phone is generally difficult to break, but if you really want him to be broken, there is still a way.

If you want the motherboard inside to burn out, your use of your home fire-burning device, in the case of high temperature, the motherboard inside is very easy to burn out, the temperature should not be too high about 50 degrees on it, it is best to bake the device in winter, the next software, the file to be more than 150k, keep playing, soon the machine can't stand it, you just keep turning on and off, keep playing games, about 3 hours, the machine will not be able to stand it, resulting in the motherboard temperature is too high, and finally it is turned on after turning on itself, unable to communicate, The battery level is not displayed.

The main button is about 20,000 times to cause failure, and the side button is about 5,000 times, which is faster in high temperature and high humidity.

If you want to solve the problem at one time, it is to find a power supply within 15V, connect it directly, and then turn it on, and the problem will be solved!

Water intake is the fastest, but that's certainly not the case.

Why don't you want to change a mobile phone case, even if you return a mobile phone, it seems that you have to calculate the fee at five thousandths of the original price of the mobile phone every day, and pay it to the seller.

It's really a cow, forget about scratching the flowers, just scratch the flowers.

Take a picture, take a few hundred photos in one breath and it will definitely be bad (remember to delete the ** taken by the shot).

Summary. The purpose of this is to break down the chipboard of the mobile phone and cause damage. Resulting in chip damage and program errors leading to complete scrapping.

Hello dear, glad to answer for you. Pro, you can start from the charging voltage to make the mobile phone bad naturally, the general mobile phone is normal voltage, you use the protective power supply to turn on the mobile phone, from small to large hail to slowly increase the voltage, the power chip of the mobile phone source motherboard is naturally too high and burns off, so that you can realize that you say that the mobile phone is damaged without affecting the appearance.

Electrostatic destruction method. Turn on the mobile phone, some mobile phones can see when they take off the battery, find the largest chip on the circuit board of the mobile phone, and there are some pins next to it, comb the hair with a plastic comb to imitate noisy hair, until you feel that there is static electricity, and then put the circuit board on the hair to rub, and grasp the time yourself.

The purpose of this is to break down the chipboard of the mobile phone and cause damage. Resulting in chip damage and program errors leading to complete scrapping.

How to make the mobile phone break naturally 1, put the mobile phone in the pocket of the clothes, go to wash the clothes and accidentally drop it in the water and put it in the basin, the motherboard will burn out. 2. Give the mobile phone to the child as a toy, and if the child accidentally falls on the ground if he is held a little higher, the mobile phone will be broken. Of course, don't blame the child.

Let's just say that you don't hold it steady, 3. Flashing, the method of brushing the machine is the most invisible, and the appearance will not change, but it will not be usable. Mobile phone maintenance tips: 1. Use mobile phone holsters or protective cases:

Most of today's mobile phones can buy suitable protective covers, which can reduce the friction of the mobile phone shell, and it will not be easy to peel off the paint when it encounters hardness or falls on the ground. It's a person who doesn't like to bring a sleeve to his mobile phone, and in the end, the paint on both sides of the phone fell off a lot, but the screen is still brand new, and it sounds like a bitter tear. 2. Do not put your phone in a humid environment

If your phone is not drained, do not use the phone in a humid place for a long time, which will cause the old coarse moisture to seep into the phone and erode the circuit board inside, resulting in a short and long line of power. For example: bathtubs, laundry sinks, wet basements, swimming pools, etc.

3. Protect the charging port.

Don't buy a copycat phone, my phone hasn't broken yet.

Soak in the water. The simplest and most convenient. Soaking the battery in water is the most serious method, and if you don't take it out immediately to dry, the motherboard will burn off.

It is recommended that you soak in water for 10 seconds when you turn it on, and then take it out and dry it with a hair dryer, so that even if you can turn it on, there will definitely be inexplicable problems. It also allows your parents to dispel their doubts and think that you helped break it.

Or you can find the battery, soak the battery in water for 1 minute, then take it out and blow dry. Show it to your parents and say the phone is broken. I can't turn it on.

If it's a little more complicated, it's flashing.

If you are not afraid of being seen to be caused by external forces, you can use the following 1 2 method 1, fall hard.

2. Soak in water. If you don't want to see it artificial, you can use the third method.

3. Then you can choose high-power voltage charging, the standard voltage of the mobile phone is volt, you only need to add a 6 volt voltage to the mobile phone, and the mobile phone will break immediately.

First, get your clothes dirty, put your phone in your pocket on mute, and put it in the washing machine to wash it. Then it's up to you how you act.

1. Put the phone in water, and the motherboard will burn out.

2. Drop the phone the ground, and the phone will break.

3. Flashing, the method of brushing the machine is the most invisible, and the appearance will not change, but it will not be usable.

Turn on the phone and put it in the water, take it out and use it, and soon the motherboard will burn off.

It's very simple to brush the machine and it's easy to brush bad as long as you don't follow the correct method.

How so? It's better to sell it directly and transfer some money Just lose it directly with the family And then cry for a while, and the parents' hearts are soft, it's OK Besides, the parents' money is not blown by the wind Hard work to make money, we buy a mobile phone for four or five thousand And how long do they have to work hard to transfer?

As a non-obvious article on how to make your phone break down quickly, this article aims to provide some ways to cause damage to your phone, but we strongly discourage it. Because this may not only affect your phone experience, but also make your phone unrepairable, resulting in more megabytes of waste.

First of all, you can try to use some low-quality chargers and cables. Although these devices are cheap, their safety and quality are unreliable. Using these devices may cause issues such as your phone's battery overheating, unstable power, and more.

Second, you can try charging your phone frequently. Although modern phones have been optimized for overcharging, frequent charging can still shorten the life of the phone's battery. It is recommended that you try to keep your phone battery between 20% and 80% and avoid frequent charging.

In addition, you can also try to avoid closing apps and clearing caches when using your phone, which will make your phone lag worse and even cause the system to crash.

Finally, if you want your phone to break faster, you can try leaving your phone in a hot or humid environment. This can cause damage to the phone's internal circuitry and even cause the phone to not work properly.

In conclusion, while the methods provided above may cause damage to your phone, please note that doing so is not only a waste of resources, but may also have a negative impact on the environment. We recommend that you protect your phone as much as possible and use it correctly to prolong its lifespan.