May I ask if the bathroom tiles in my house are leaking and the gaps are very large, what materials

Water leakage proves that there is a problem with waterproofing, if it can be determined that it is a problem with the brick joint, you can re-hook the joint, which should be able to reduce the leakage, but it should not be the best way! Provide more information, free professional technical consultation on concrete waterproof leakage repair.

Bathroom tiles leak, the outside water goes in, or the inside water comes out. If the water inside goes in, you can use wide seam caulk. Singing is when the water inside comes out. It can be water-free. It is commonly referred to as expanded cement.

It is recommended that you use the simplest material to make it easy to use a new generation of nano waterproof material . This product is specially designed for bathroom tile leakage.

It has a very good caulking and beautifying effect 10 minutes to solve the repair of tiles Convenient and fast without asking for people It is a new generation of plastic steel mud and glass glue.

Plastic steel clay. Just go and buy one inside.

In addition, there is a 5-year warranty for waterproofing and 2 years for pipelines, and it is the responsibility of the developer to be non-human during the warranty period!

Plugging the seams with white cement will do.

If the gap is large, you can first use construction glue to mix the cement hook under the joint, and then fill the ground brick caulk on top.

When there is water seepage, this kind of situation is caused by the waterproof work is not done well, at this time we must find some ways to deal with it to prevent some unnecessary inconvenience in the future. Let's introduce what kind of glue is used for water seepage in tile gaps.

1.You can use waterproof gap agent to make up for it, generally speaking, their gaps are all thin, this kind of gap is also the most very easy to seepage, only the application of waterproof gap agent to make up the gap, can not be easy to seepage.

2.When the gap seeps, only with super glue plugging is not to achieve the actual effect, must find the root cause of water seepage, if it is caused by the leakage of the underground water pipe, it will be dismantled and replaced, and then the tile will be pasted again.

If the waterproof solution has already been done, or water seepage has occurred, or the waterproof layer has not been done well, at this time, you can use fully transparent waterproof to carry out rescue, relatively speaking, the way is simpler, just wipe the tile clean, and the brush must be symmetrical.

The waterproof height must be right, if the waterproof height is not up and down one meter, then the sofa attached to the wall will not be able to get up the actual effect of waterproofing, if it is not a load-bearing beam, the whole wall can be waterproof.

The toilet is waterproof, it must be designed and made in accordance with the regulations, and the best inclination can be found so that the water can be put very quickly, and the road surface must be wet paved.

I usually use some glass glue to fill it, so that there will be no water seepage problem, of course, you can also buy some kind of caulk directly to seal the gap, so that there will be no water seepage problem.

It should be filled with art glue, so that there will be no water seepage, the aesthetics of the tile can be guaranteed, and effective repair can be carried out.

I think you should use marble glue to fill it, so that the gaps in the tiles will not seep water, because marble glue is very strong.

Adhesive glass glue, this glue looks transparent, the adhesive effect is very good, and it will be waterproof, which is very suitable for the bathroom.

If the tile joint is filled with caulk or other non-waterproof material, you need to make a small groove with a wallpaper knife and clean it. Gaps that are small or solidified do not need to be snapped open. Then spray with water repellent:

Spray penetrating waterproofing agent on the surface of ceramic tiles, tile joints, wall joints and pipe roots and other cement parts, and must be sprayed evenly; Stuffed with caulkin; After the waterproofing agent is dry, fill the tile joints, pipe roots, and damaged and defective parts with caulk. This includes the crevices of the wall tiles that can be drenched with water.

It is necessary to observe whether there are gaps in the ceramic tile floor. If there are hollow bricks or large gaps, they need to be filled, and the water between them should be removed before filling. When filling the gaps, you should use professional cutting tools, fill the gaps in the ceramic tiles of the toilet with tools or scrapers, and under normal circumstances, water will not seep down.

Because if there is no problem with the quality of the installed ceramic tiles, the ceramic tiles are close to the wall, the gaps between the bricks are filled by sealant, and the toilet floor tiles are filled with white cement, putty powder, sealant, sealant and other materials. Among them, white cement and putty powder belong to traditional materials, and there will be some defects in performance, and there is no beauty seam for ceramic tiles. Because the beauty sewing can be carried out at any time after the completion of the ceramic tile.

When caulking, use a professional tool or scraper to caulk, push the sealing material into the gap in the direction of the split, and remember not to lift the tool too high or leave the gap halfway. When completed, the slurry overflowing from the slope is removed. It is important to note that the mud in the crevices cannot be removed.

If there is excess mud on the surface of the tile, to avoid affecting the appearance, the surface can be quickly cleaned with a damp cloth. We just need to clean the pores of the ceramic tiles with a cleaning tool.

Generally, when the porous ceramic brick pores occur, the pores can be fully filled with waterproof caulk first, the water permeability of the ceramic brick itself is very low, and the water seeps out from the ceramic brick joint, which is not serious, so that the water leakage problem can be basically solved. Re-do the waterproof layer: if the waterproof layer is not done before, it is necessary to knock off the tile to make the waterproof layer after the occurrence, the filling of the tile is only a temporary way, after the thermal expansion and cold contraction of the bathroom temperature, the gap of the tile will soon appear gap, so the fundamental solution to this problem is to re-do the waterproof layer.

You can use resin-based, and most of the materials are epoxy resin + curing agent. According to the material, it can be called resin-based caulk, and resin-based caulk has waterproof, anti-fouling and other functions.

1.There are often fine seams between tiles and tiles, and this kind of fine seams are the most prone to water seepage. You can use waterproof paint to fully fill the gaps in the tiles and slow down the process of water seepage.

2.It is also possible to install a waterproof layer, or grouting waterproofing.

3.Use caulking paste to fill the joints, after the waterproofing agent 9 is dry (about 2 hours later), fill all tile joints, pipe roots and damaged and defective parts with caulk, including the wall tile gaps that can be drenched with water.

4.The use of transparent waterproof adhesive, which does not need to chisel off the tile, as long as the surface is waterproof, it becomes transparent after drying, and will not damage the aesthetics of the surface.

There are many options for water seepage materials in bathroom floor joints. Among them, there is a waterproof fine seam agent, which is a very good material. There are often fine seams between tiles and tiles, and this system is the easiest to seep water, and then you can use waterproof paint to fully fill the gaps in the tiles, and slow the process of water seepage.

It is also possible to install a waterproof layer, or grouting waterproofing.

If the ground water leaks through the cracks of the floor tiles to other places, and the waterproofing is done fundamentally, it is not required to do the ground waterproofing, and the water will still come out from other places.

The most fundamental thing is to find the leakage point for treatment, so it is necessary to start from the ground waterproofing, indicating that the ground waterproofing is not done well, if the floor tile joints can be waterproofed, if it is from the ground upwards to reverse the water, it is useless to just plug the floor tile gaps.

The white cement in the tile joint can be crossed out, which can have a certain waterproof effect, so as to treat it from the root, and use water without leakage or use JS waterproof paint to make the joint.

Ceramic tile is a kind of acid and alkali resistant porcelain or stone building or decoration material formed by the process of grinding, mixing, pressing, glazing and sintering of refractory metal oxides and semi-metal oxides, which is generally called ceramic tile. Its raw materials are mostly made of clay, quartz sand, etc.

Basic introduction] ceramic tile is a kind of acid and alkali resistant porcelain or stone building or decoration material formed by the process of grinding, mixing, pressing, glazing and sintering of refractory metal oxides and semi-metal oxides, which is generally called ceramic tile.

Its raw materials are mostly made of clay, quartz sand, etc.

If the ground leakage is not very serious, you can cross off the white cement in the tile joint, use water without leakage or use JS waterproof paint to make a seam, which can play a certain waterproof effect.

If the water is reversed from the ground, it is useless to just plug the gaps in the floor tiles, and the water will still come out from other places, and the most fundamental thing is to find the leakage point for treatment.

If the ground water leaks to other places through the gap of the floor tile, it means that the ground waterproofing is not good, and it is useless to block the floor tile joint.

What to fill the gaps in the bathroom tiles can be waterproof, and the joint material must be selected to ensure that the bathroom does not leak.

You can use Australia's Auchang brand (bathroom transparent leak-proof agent) to brush directly on the tiles, brush twice.

Let's use Junco caulk. Good quality. There are two-component ones. Waterproofing.

Try it with caulk, there's that kind of waterproof caulk, but I suspect it's because you haven't done a good job of waterproofing, otherwise it wouldn't be like this.

What should I do if there is water seepage in the gap between the bathroom tiles? This is a problem that often occurs in many homes, because of various reasons for the lack of water seepage on the wall tiles, in addition to affecting the appearance of the bathroom, more affects the use of the bathroom, over time these seepage places may have the danger of tile falling off. Go and find out what to do if the bathroom tiles are leaking.

1. Cause analysis.

Bathroom tile water seepage must first understand what causes water seepage, there are several reasons: first, the waterproofing of the bathroom is not in place; The second is that the water pipe in the wall is broken and leaks; There is also in the rainy weather, due to the humid air, resulting in water on the surface of the tile; Finally, the tile gaps are not good, and there is water seepage.

2. Solution:

First of all, if there is a problem with the waterproof layer, the tile must be removed, the wall to the waterproof layer, see the inner wall is better, and then scrape the putty again, re-make the waterproof layer for the wall, and then pave the tile, generally this method is more complicated, so it is recommended to check it clearly before proceeding.

Secondly, let which burn is the rupture of the water pipe caused by water seepage, in this case, you need to test the pressure of the water pipe when inspecting to see if there is a water leakage, if it is indeed caused by the damage of the water pipe, you should immediately find out the leakage, open the wall and replace the water pipe.

Then, if the wall is only leaking due to dampness, you only need to pay more attention to the ventilation and cleaning of the bathroom in your daily life.

Finally, if the tile gap is not good, there will be water seepage. First you need to use cement or caulk to fix the cracks, and then make a layer of waterproofing.

After reading the above analysis and solutions to the causes of water seepage in bathroom tiles, do you know how to deal with water seepage tiles? It is worth mentioning that no matter which kind of bathroom tile is good, we still have to take the initiative to understand how to choose bathroom tiles. Because I think that in order to effectively prevent bathtubs, bathroom tiles and other moisture-proof and non-slip, we must have some bathroom safety knowledge, so that the treatment of bathroom tiles can be put in place in time.

In this way, the occurrence of undesirable accidents can be avoided.

The bathroom is the place where the most water is used, of course, this problem is difficult to avoid, so the waterproofing project is the most important part of the bathroom decoration. However, sometimes the walls of the bathroom still leak after waterproofing. So,Water seeps through the cracks of the wall tiles in the bathroomHow to deal with it?

The decoration of the bathroom is special, waterproof is a very necessary project, but the problem of water leakage often occurs, and the leakage must be dealt with in time to avoid leakage downstairs.

1. Before treatment, the leaky wall of the bathroom must be cleaned to remove the dust. If you install a water pipe, you need to distinguish between the upper pipe and the lower pipe. The impact of a broken water pipe on the bathroom wall is very large, and it needs to be dismantled during processing.

As a rule, it is necessary to carry out an inspection of the wall tiles, then find the connecting part of the water pipe, check the partition for water leaks, find the leakage point, replace the water pipe or interface, and then the wall is re-waterproofed and the tile surface is restored.

2. There may also be problems with the waterproof layer of the bathroom wall, or there is no waterproof layer on the bathroom wall, which will cause the wall to leak. In this case, it is necessary to scoop up the tiles from the surface, find the space between the tiles, smooth them with waterproofing, and then apply a waterproof coating to the walls. If there is a leak due to insufficient waterproofing height, it is necessary to replan the high-rise tiles, re-waterproof, and then apply the tiles.

3. Generally speaking, the waterproofing of the bathroom wall not only depends on the waterproofness of the bathroom floor, but also depends on whether the wall has been waterproofed and added some waterproof materials. A good waterproofing project is not only to prevent the leakage of the bathroom floor, but also to do waterproof work on the bathroom wall, the height can not be less than meters, of course, the height is higher, it will be better. Leaks in the walls of the restroom can be sealed with leakproof or glass sealants around the pipes to prevent water leaks.

However, this method is very long or socks time can not be followed by dry hands.

Here's what we've learnedWater seeps through the cracks of the wall tiles in the bathroomLet's take a look at how to deal with it.

You can get it for free